• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2017년)
• /
• pp.602-607
• /
• 2017

본 연구는 4족 보행 로봇을 설계하기 위해 linkage of jansen mechanism을 선택하였고 설정한 보행 목적에 맞는 최적 링크의 길이를 구하기 위해 Edison SW를 사용하여 해석을 하고 수치적 해석을 동원하여 목표에 대한 신뢰를 높인다.

• 한국지능시스템학회논문지
• /
• 제21권5호
• /
• pp.660-666
• /
• 2011

본 논문에서는 절 기구(bar linkage)형 다관절 보행로봇(multi-legged walking robot)의 최적다리 길이선정을 위하여 입자군집 최적화(PSO: Particle Swarm Optimization) 기법을 사용하였다. PSO 알고리즘을 적용하기 위해서 제안한 보행로봇의 기구학적인 해석이 필요하다. 게 로봇은 4절 링크 이론(four-bar linkage)과 얀센 메커니즘(Jansen mechanism)을 기반으로 설계되었다. 이러한 기구학적인 해석을 바탕으로 로봇의 보행보폭을 정의한다. 그리고 PSO의 학습 및 군집 특성을 이용하여 최대의 보행보폭을 가지는 10개(EA)의 링크(link)길이를 구한다. 시뮬레이션을 통해 각 링크의 위치와 다리 끝단의 보행보폭을 확인할 수 있다. 결과로서, PSO기법이 절 기구형 다관절 보행로봇의 최적다리 길이 선정에 효율적임을 보여 준다.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.389-396
• /
• 2016

In order to maximize the speed of Theo Jansen Mechanism in an given design space and prototyping material, the trajectory path was maximized according to several literature reviews, and the lower leg was elongated maximally in order to minimize the shift between support phase and transfer phase.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2017년)
• /
• pp.534-538
• /
• 2017

There are three types of robots that move on the ground classified as drivetrain. Wheels, tracks and Legs. Wheels and tracks are much easier to construct and control, but they have problems passing through obstacles like people. This paper discusses the design of line tracing using Theo Jansen, one of multi-legged walking mechanism. In order to increase the moving speed, the Jansen mechanism is designed by maximizing the objective variable as GL (Ground Length), GAC (Ground Angle Coefficient). In this project, only three sensors were attached and Arduino was used for optimal control of the motor using the sensor values.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.473-476
• /
• 2016

In this study, important design factors in Jansen leg mechanism by which two legs can be driven by only one input like a motor are considered through method of transmitting motion in three-bar linkage and Grashof law in four-bar linkage. In preliminary design, by using EDISON m-sketch and its simulation which can observe trace of feet, two identical four-bar linkages are initially designed and two three-bar linkages are added to four-bar linkages sequentially. By analyzing GL(Ground Length) and GAC(Ground Angle Coefficient), the adequacy of the preliminary design was estimated. Final design of walking apparatus is implemented using CAD software, Assembly2 of EDISON Designer. Finally, proposals to improve software used in this study are suggested.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.424-428
• /
• 2016

This paper presents the kinematics of a walking robot leg based on Jansen mechanism. By using simple mathematics, all trajectories of walking robot leg links can be calculated. A foot point trajectory is used to evaluate the performance of a walking robot leg. Trial and Error method is used to find a best combination of link lengths under certain restrictions. All simulations are performed by Matlab. Ground score, drag score, step size, foot lift, instant speed, and average speed of foot point trajectories are used for selecting the best one.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.516-517
• /
• 2016

I use Jansen mechanism to reduce the unnecessary motion of car body and improve the motion performance capability in the rugged terrain To reduce the unnecessary motion, the positional variation of a main body of vehicle should be minimized. In order to reduce the change of height and control the speed at every moment when vehicle move, 16 legs or more are installed on a crankshaft and the paths of leg motions need to be considered in the rugged terrain. The vehicle will be optimized so that it produces a sufficient speed and torque for practical use. Finally, I designed proper body with Edison simulation. The simulation is good for beginners of mechanism design.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.429-433
• /
• 2016

Moving robot is divided 2 kinds; one is the robot using wheels and the other has leg structure. On plat terrain, the former is better than the latter because it has fast speed and simple method to control. But on non-plat terrain, the situation is reversed. The robot using legs has slow speed but it has advantage to adjust various environments. This robot is expected to contribute to human in many fields such as rescue and exploration and so on. So walking robot is worth enough to research. In this paper, we present the design of 4-legged walking robot based on Jansen mechanism using m-Sketch and Edison Designer.

• 한국지능시스템학회논문지
• /
• 제21권2호
• /
• pp.159-164
• /
• 2011

본 연구에서는 4절 링크 이론(four-bar linkage mechanism)과 얀센 메커니즘(Jansen mechanism)을 기반으로 다관절 보행 로봇(multi-legged walking robot)인 게(crab) 로봇을 제작하고, 게 로봇의 움직임에 대하여 기구학적인 해석을 제시한다. 제작된 게 로봇은 영상 획득을 위하여 카메라를 장착하였고, 장애물 회피를 위하여 3조의 초음파 센서를 가지고 있다. 또한 RF통신으로 외부에 영상 정보를 전달하며, Blue-tooth 통신 모듈을 장착하여 외부로부터 부여된 임무를 수행할 수 있다. 게 로봇의 설계와 제작을 하기 위해서 필요로 하는, 로봇 다리의 움직임을 알기 위해서는 관절 변수와 다리 끝단의 위치 및 자세와의 관계를 얻어야 한다. 따라서, 제안된 기구학적 해석은 로봇의 설계와 제작에 있어서 많은 도움을 주며 중요한 과정이다.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.397-403
• /
• 2016

Various walking robot platforms have been developed to carry out missions such as explorations, pass of obstacle or inspections of dangerous environments. In this work, a four legs mechanism based on Jansen mechanism is developed, which can follow a certain track and overcome obstacles. To find the ideal locus, computer programs are used such as M. sketch and Working model. Using these program tools, moderate linkage sizes are selected in Science Box. Furthermore, in order to optimize design of legs, a level average analysis is used as well as Edison S/W. Through the design optimization, improved stride of locus is found.