• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.7
• /
• pp.903-907
• /
• 2006

Frozen stability of proteins recovered from white croaker and jack mackerel have been tested by measuring oxidation of residual lipid, browning, total plate count, and texture of gel during storage at $-20^{\circ}C$. The oxidation of residual lipid in recovered protein from Jack mackerel increased up to 60 days, and then decreased. Both browning values significantly was increased after 90 days. Total plate count was $1.2{\times}10^4\;CPU/g$ for proteins recovered from white croaker and $3.2{\times}10^4\;CPU/g$ for proteins recovered from jack mackerel in 60 days. The breaking force, deformation, and whiteness of gel formed from proteins recovered from white croaker did not change up th 120 days significantly, while proteins recovered from jack mackerel did not form heat-induced gel in 120 day. Frozen storage of the recovered protein was limited to 90 days for white croaker and to 60 days for jack mackerel considering the gelling ability and textural properties.

• Railway Journal
• /
• v.12 no.1
• /
• pp.56-62
• /
• 2009

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.7
• /
• pp.800-807
• /
• 2006

This paper introduces the hull deflection analysis method by using the direct measurements. Accordingly, this paper demonstrates how the hull deflection data is obtained by the reverse calculations using the bending moments from the stain gauge and bearing reactions from jack-up method. Where the hull deflection data provided by this research is used for the shafting alignment calculations for identical or similar vessels, shafting failures due to hull deflections can be minimized. It will also save time and expenses associated finite element method to predict hull deflections.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.1
• /
• pp.45-54
• /
• 2017

The purpose of this study is to evaluate various means of wind power turbines installation in the Korean west-south wind farm (Test bed 100 MW, Demonstrate site 400 MW). We presented the marine environment of the southwest offshore wind farm in order to decide the appropriate installation vessel to be used in this site. The various vessels would be WTIV (Wind turbine installation vessel), jack-up barge, or floating crane ${\cdots}$ etc. We analyzed the installation cost of offshore wind turbine and the transportation duration for each vessel. The analysis results showed the most suitable installation means for offshore wind turbine in the Korean west-south wind farm.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.6
• /
• pp.407-414
• /
• 2023

In this study, an automated jack-up system, applicable to various fields, was employed for 3D concrete printing and developed as a simultaneous liftable 3D concrete printing system. This developed printing system enables safe and precise jack-up by monitoring the measured jack-up distance using Pearson correlation coefficient analysis and a hydraulic system with interquartile range analysis in real-time during 3D concrete printing operations. It is possible to secure the quality of 3D concrete printing structures, which is essential for expanding the application of 3D concrete printing to construct larger structures. Specimens were printed using both conventional 3D concrete printing and simultaneous liftable 3D concrete printing to evaluate the system performance. The printed specimens were investigated using a 3D scanner. The layer-wise diameter and angle of intersection of the scanned specimens were measured, and an analysis was performed to verify the advantages of the simultaneous liftable 3D concrete printing.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.6
• /
• pp.347-353
• /
• 2019

Electric-hydraulic sever cylinders are used in many offshore applications such as wind energy farms, solar farms and plants. Jack-up barges are often used for these offshore system operations. Jack-up barge control is up/down by hydraulic cylinder position control. Working in harsh environments can lead to changes in internal parameters. This nonlinearity makes precise control difficult. In order to overcome the problems, we proposed a method of unknown-parameter estimation algorithm based on measurements obtained by system. In this paper, we employee Unscented Kalman filter (UKF) to estimate states and unknown-parameter from augmented nonlinear equation. Performance of estimation results is verified in simulation on an environments of Matlab. The estimation results of the state and unknown-parameter show that the estimation error of unknown-parameter is reduced according to decreasing the state estimation error.

• Ocean Systems Engineering
• /
• v.7 no.2
• /
• pp.107-120
• /
• 2017

Spud-can is used for fixing jack-up rig on seabed. It needs to be inserted up to the required depth during the installation process to secure enough soil reaction and prevent overturning accidents. On the other hand, it should be extracted from seabed soils as fast as possible during the extraction process to minimize the corresponding operational cost. To achieve such goals, spud-can may be equipped with water-jetting system including monitoring and control. To develop such a smart spud-can, a reliable numerical simulation tool is essential and it has also to be validated against physical model tests. In this regard, authors developed a numerical simulation tool by using a commercial program ANSYS with extended Drucker-Prager (EDP) formula. Authors also conducted small-scale (1/100) physical model tests for verification and calibration purpose. By using the numerical model, a systematic parametric study is conducted both for sand and K(kaolin)-clay with varying important soil parameters and the best estimated soil properties of the physical test are deduced. Then, by using the selected soil properties, the numerical and experimental results for a sand/K-clay multi-layer case are cross-checked to show reasonably good agreement. The validated numerical model will be useful in the next-stage study which includes controllable water-jetting.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.4
• /
• pp.67-74
• /
• 2010

Single layer latticed domes which have a mechanics property, a functional property, a aesthetic property and so on, occupies one part of long span space structures and after this, the using parts will be extended. The frame network pattern of single-layer latticed domes can be infinitely taken into account. The typical network patterns are triangular, square, hexagon, lamella and rib etc. It would take long time and cost too much to erect large roof structures with traditional erection techniques due to require of large number of temporary bracing and supports. The erection of large roof structures requires special techniques. As one of these special techniques is the Step-Up election method that utilizes jack-up supports and this will extremely saves time and cost to erect large roof structures. The objective of this study is to analysis the buckling characteristics of single-layer lamella domes according to the support number and position. From the result of this study, we obtained the fundamental data for the structural engineers who design the temporary support of large roof structures.

• Journal of Plant Biotechnology
• /
• v.35 no.1
• /
• pp.69-74
• /
• 2008

This study aims to establish the efficient soybean transformation system and develop soybean [Glycine max (L.) Merill] transformants using cotyledonary node explants. The cotyledonary node of soybean were co-cultivated with Agrobacterium tumefaciens strains (KYRT1, EHA105). These strains contain the binary vector pCAMBIA3301 which carries a herbicide-resistant far gene. Korean cultivars (Danbaekkong, Eunhakong) and foreign cultivars (Jack, Peking) were the most efficient in regenerating cotyledonary node. Therefore, they were chosen for the transformation. Results showed that the T-DNA transfer reached up to 60% and transformation efficiency reached up to 3% in the cotyledonary node explants from Jack cultivar, co-cultivated with EHA105 strain. Histochemical GUS evaluation showed that 12 individual lines, transformed with the 현 gene, have positive response. The transformed soybeans have been confirmed in the $T_0$ generation through phenotypic assay using herbicide $Basta^{(R)}$ and Southern blot analysis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.711-714
• /
• 2004

A new design for improving the aperture ratio of bottom emission type AMOLED is investigated. In conventional, the TFT of AMOLED fabrication method is "Etch Stopper (7-mask)", so the aperture ratio is limited in 28${\sim}$33% by Cs(Storage Capacitor). A high aperture ratio TFT is designed by using BCE(Back Channel Etching 5-mask) fabrication way and the aperture ratio is up to 40% shown in 2.2"AMOLED display.