• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.125-130
• /
• 1997

Effect of cross-section libraries on displacements per atom (dpa) was investigated under the spectrum which is calculated in the outer and inner of capsule in the JMTR fuel region. The variation of dpa value of iron was calculated by TENJIN2 code using several cross section libraries (ENDFB-lV, JENDL 3.1 and JENDL 3.2). The dependency of input spectrum on total damage (dpa) is more clearly appeared in case or ENDFB-IV in JENDL 3.2 and JENDL 3.1 libraries. The gas production rate calculated by ENDFB-IV library showed slightly larger value than that by JENDL library, and it responded more sensitively in neutron spectrum.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.82-82
• /
• 2001

• Nuclear Engineering and Technology
• /
• v.55 no.9
• /
• pp.3352-3358
• /
• 2023

Nuclear medicine seems to be a decent choice of medicine in the recent decade. The radioactive isotopes ⁵¹Cr, ⁸⁹Sr, ⁹⁹Tc, ¹³¹I, ¹³³Xe, ¹³⁷Cs and ¹⁵³Sm are extremely essential in nuclear medicine. The excitation functions of the ⁵⁴Fe (n, α) ⁵¹Cr, ⁹²Zr (n, α) ⁸⁹Sr, ¹⁰²Rh (n, α) ⁹⁹Tc, 134Cs (n, α) ¹³¹I, ¹³⁶Ba (n, α) ¹³³Xe, ¹⁴⁰La (n, α) ¹³⁷Cs and ¹⁵⁶Gd (n, α) ¹⁵³Sm reactions were calculated in this study using the EMPIRE 3.2.3 and TALYS 1.95 nuclear codes. Additionally, the cross sections at 14-15 MeV were calculated using empirical formulae and the experimental data. The computer codes were compared to the experimental data and Empirical formulas as well as the evaluated data (TENDL 2021, JENDL 3.3, JENDL 5, JEFF 3.3, EAF 2010, CENDL 3.1, CENDL 3.2, ROSFOND 2010, FENDL 3.2 b, and BROND 3.1).

• Nuclear Engineering and Technology
• /
• v.50 no.1
• /
• pp.35-42
• /
• 2018

This article presents clean core criticality calculations and control rod worth calculations for TRIGA (Training, Research, Isotope production-General Atomics) Mark II research reactor benchmark cores using Winfrith Improved Multi-group Scheme-D/4 (WIMS-D/4) and Program for Reactor In-core Analysis using Diffusion Equation (PRIDE) codes. Cores 133 and 134 were analyzed in 2-D (r, ${\theta}$) and 3-D (r, ${\theta}$, z), using WIMS-D/4 and PRIDE codes. Moreover, the influence of cross-section data was also studied using various libraries based on Evaluated Nuclear Data File (ENDF/B-VI.8 and VII.0), Joint Evaluated Fission and Fusion File (JEFF-3.1), Japanese Evaluated Nuclear Data Library (JENDL-3.2), and Joint Evaluated File (JEF-2.2) nuclear data. The simulation results showed that the multiplication factor calculated for all these data libraries is within 1% of the experimental results. The reactivity worth of the control rods of core 134 was also calculated with different homogenization approaches. A comparison was made with experimental and reported Monte Carlo results, and it was found that, using proper homogenization of absorber regions and surrounding fuel regions, the results obtained with PRIDE code are significantly improved.

• The Journal of the Korea Contents Association
• /
• v.4 no.2
• /
• pp.76-82
• /
• 2004

The thermal neutron capture cross-section (at 2,200 m/s value) of the $^{141}$Pr(n,$\gamma$)$^{142}$Pr reaction was measured by an activation method by using the heavy water ($D_2$O) thermal neutron facility at the KUR(Kyoto University Reactor). The thermal neutron fiux used in this experiment was monitored with the$^{197}$Au(n,$\gamma$)$^{198}$Au standard cross-section. The previous results and the evaluated data of JENDL-3.2, ENDF/B-VI, and JEF-2.2 were in good agreement with the current result.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.304-309
• /
• 2023

In the last decade, nuclear medicine appears to be a good choice of medicine. ⁵⁸Co, ⁹⁹Mo, ⁹⁹Tc, ⁹⁹Re, ¹³³Xe and ¹⁸⁶Re are very important radionuclides for nuclear medicine. In this study, the excitation functions of ⁵⁸Ni (n, p) ⁵⁸Co, ⁹⁹Tc (n, p) ⁹⁹Mo, ⁹⁹Ru (n, p) ⁹⁹Tc, ¹³¹Xe (n, p) ¹³¹I, ¹³³Cs (n, p) ¹³³Xe and ¹⁸⁶Os (n, p) ¹⁸⁶Re nuclear reactions were calculated at neutron energies between 1 and 20 MeV using TALYS 1.95 and EMPIRE 3.2 nuclear codes. Furthermore, the cross sections were calculated with the empirical formula derived in our past study at 14-15 MeV. The obtained results were compared with the measured values in EXFOR library, and with the evaluated data of (JENDL-4.0/HE, JEFF-3.3, TENDL-2019, ENDF/B-VIII.0, IRDFF-II, JENDL/ImPACT-18). The results are in good agreement with those of the evaluated data libraries and experimental results and indicates that these radioisotopes can be produced by smaller cyclotrons.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.185-190
• /
• 1997

고속로 검증실험의 2차원 상세해석을 MATXS형 라이브러리와 TWODANT를 이용하여 수행하였다. 80군자료를 2차원 coarse mesh 계산으로 생산된 중성자속을 가중함수로하여 25군으로 축약하고, P$_3$S$_{8}$, 2차원 R-Z모델로 임계도 및 중심반응률비를 계산하여 실험값과 비교하였다. 이 과정에서 ENDF/B-VI$_3$, JEF-2.2 그리고 JENDL-3.2 라이브러리를 상호 비교, 검토하였다.

• The Journal of the Korea Contents Association
• /
• v.5 no.5
• /
• pp.133-139
• /
• 2005

The neutron capture cross section of $^{99}Tc$ has been measured relative to the $^{10}B(n,\gamma)$ standard cross section by the neutron time-of-flight(TOF) method in the energy range of 0.007 eV to 47 keV using a 46-MeV electron linear accelerator(linac) at the Research Reactor. Institute, Kyoto University(KURRI). In order to experimentally prove the result obtained, the supplementary cross section measurement has been made from 0.3 eV to 1 keV using the Kyoto University Lead stowing-down spectrometer (KULS) coupling to the linac. The relative measurement by the TOF method has been normalized to the reference value(20.01 b) at 0.0253 eV and the KULS measurement to that by the TOF method. The existing experimental data and the evaluated capture cross sections in ENDF/B-VI, JENDL-3.2, and JEF-2.2 have been compared with the current measurements by the linac TOF and the KULS experiments.

• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.286-290
• /
• 2016

Background: Activation of air and water in the electron linear accelerator for medical use has not been considered severely. By the new Japanese regulation for protection of radiation hazard, it became indispensable to evaluate of activation of air and water in the accelerator room. The measurement of induced activity in air and water components in the electron energy region of 10 to 20 MeV is very difficult, because this energy region is close to the threshold energy region of photonuclear reactions. Then, we measured the photonuclear reaction yields of $^{13}N$, $^{15}O$, and $^{11}C$ by using the electron linear accelerator. Obtained data were compared with the data calculated by the Monte Carlo method. Materials and Methods: An activation experiment was performed at the Research Center for Electron Photon Science, Tohoku University. Highly purified $SiO_2$, $Si_3N_4$, and carbon disks were irradiated for 10 minutes by bremsstrahlung converted by a tungsten plate. Induced activity from C, N, and O was obtained. Monte Carlo calculation was performed using MCNP5 and AERY (DCHAIN-SP) to simulate the experimental condition. Cross section data were adopted the KAERI dataset. Results and Discussion: In our experiment in hospital, calculated values were not agreed with experimental values. It might be three possible reasons as the cause of this deference, such as irradiation energy, calculation procedure and cross section data. Obtained data of this work, calculated and experimental values were good agreement with each other within one order. In this work, we used KAERI dataset of photonuclear reaction instead of JENDL. Therefore, it was found that the photonuclear cross section data of light elements are most important for yield calculation in these reactions. Conclusion: Further improvement for calculation using a new dataset JENDL/PD-2015 and considering electron energy spreading will be needed.

• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.191-195
• /
• 2016

Background: The current status of ACE format MCNP/MCNPX libraries by NDC of KAERI is presented with a short description of each library. Materials and Methods: Validation calculations with recent nuclear data evaluations ENDF/BV-II. 0, ENDF/B-VII.1, JEFF-3.2, and JENDL-4.0 have been carried out by the MCNP5 code for 119 criticality benchmark problems taken from the expanded criticality validation suite supplied by LANL. The overall performances of the ACE format KN-libraries have been analyzed in comparison with the results calculated with the ENDF/B-VII.0-based ENDF70 library of LANL. Results and Discussion: It was confirmed that the ENDF/B-VII.1-based KNE71 library showed better performances than the others by comparing the RMS errors and ${chi}^2$ values for five benchmark categories as well as whole benchmark problems. ENDF/B-VII.1 and JEFF-3.2 have a tendency to yield more reliable MCNP calculation results within certain confidence intervals regarding the total uncertainties for the $k_{eff}$ values. Conclusion: It is found that the adoption of the latest evaluated nuclear data might ensure better outcomes in various research and development areas.