• Clean Technology
• /
• v.17 no.2
• /
• pp.97-102
• /
• 2011

The adsorption characteristics of amatanth dye by granular activated carbon were experimently investigated in the batch adsorption. Kinetic studies of adsorption of amaranth dye were carried out at 298, 308 and 318 K, using aqueous solutions with 100, 200 and 300 mg/L initial concentration of amatanth. It was established that the adsorption equilibrium of amaranth dye on granular activated carbon was successfully fitted by Langmuir isotherm equation at 298 K. The pseudo first order and pseudo second order models were used to evaluate the kinetic data and the pseudo second order kinetic model was the best with good correlation. Values of the rate constant ($k_2$) have been calculated as 0.1076, 0.0531, and 0.0309 g/mg h at 100, 200 and 300 mg/L initial concentration of amatanth, respectively. Thermodynamic parameter such as activation energy, standard enthalpy, standard entropy and standard free energy were evaluated. The estimated values for standard free energy were -5.08 - -8.10 kJ/mol over activated carbon at 200 mg/L, indicated toward a spontaneous process. The positive value for enthalpy, 38.89 kJ/mol indicates that adsorption interaction of amatanth dye on activated carbon is an endothermic process.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2086-2088
• /
• 2000

Key elements of in the development Electro-Thermal-Chemical propulsion (ETC) are high current pulse shaping, switching and storage bank device with high energy density 300kJ pulse power capacitor bank module for ETC application is designed and fabricated. The tested result are described.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1354-1356
• /
• 2000

This paper deals with a 300kV dc charging system to be used ?s a voltage source in a circuit breaker synthetic short-circuit-test facility. Cockcroft-walton circuit is used to step up the rectified voltage from a single phase transformer of which primary winding is hooked up to an ac220 wall plug. Two systems with the same ratings have been designed and manufactured. The two system have been made of different supporting structure with different insulating materials. The paper describes a couple of charging schemes, system configurations and the synthetic test circuit in which the developed system is to be used.

• Composites Research
• /
• v.26 no.6
• /
• pp.343-348
• /
• 2013

In the present study, quasi-static tests and impact tests were performed for investigating the mechanical behaviour of EPP (Expanded polypropylene) and EPS (Expanded polystyrene). Four different density cylindrical type specimens were prepared for EPP and EPS and 0.001 $s^{-1}$ and 0.1 $s^{-1}$ of strain rate conditions for quasi-static tests and 100 J, 200 J and 300 J of incident energy conditions for the instrumented impact tests were considered.

• Archives of Pharmacal Research
• /
• v.25 no.6
• /
• pp.851-855
• /
• 2002

Seven ergosterol derivatives (1-7) were isolated from silkworm larvae infected with Paecilomyces sp. J300. On the basis of spectroscopic means, their structures have been elucidated as 3$\beta$,5$\alpha$-dihydroxy-ergosta-7,22-diene (1), 5$\alpha$,6$\alpha$-epoxy-(22E,24R)-ergosta-8(14), 22-diene-3$\beta$,7$\alpha$-diol (2), 5$\alpha$,6$\alpha$-epoxy-(22E,24R)-ergosta-8, 22-diene-3$\beta$,7$\alpha$-diol (3), ergosta-4, 6, 8(14), 22-tetraene-3-one (4), ergosterol (5), ergosterol endoperoxide (6), 3$\beta$,5$\alpha$-dihydroxy-6$\beta$-methoxyergosta-7,22-diene (7). Compounds 3~7 showed moderate cytotoxicity against five tumor cells.

• Solar Energy
• /
• v.20 no.4
• /
• pp.25-30
• /
• 2000

The present study has been conducted to offer an geometrically optimal structure of a storage tank for a regenerator. In this paper, three kinds of baffle plates supposed to increase the regeneration rate and classified as "Type A($L^*$=0.25, 80(L)$\times$300(W)$\times$50 (H) [mm])", "Type B($L^*$=0.5, 150(L)$\times$300(W)$\times$50 (H) [mm])", and "Type C($L^*$=0.75, 230(L)$\times$300(W)$\times$50(H) [mm])" were suggested and tested. They were placed between the vertical C-C layers in the tank. Solution temperature and concentration were used to evaluate the regeneration rate. As a result, the regeneration rate was better in "Type C".

• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.300.2-300.2
• /
• 2008

• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.8-14
• /
• 2007

This paper deals with the electrical design and analysis of a 300HP, 60,000rpm permanent magnet synchronous motor for turbo machine. The design is performed by analytic method of magnetic field theory. And electrical losses of the motor driven by current with sinusoidal and harmonic form are analyzed by using FEM.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.234-241
• /
• 2002

In this study, a numerical method which assesses running stability of freight car loading 300m CWR and structural safety of conventional railway track when passing over curves and steel girder bridges is presented. Optimal speed of the freight car is suggest on the basis of numerical reviews for stability of derailment of the freight car and structural safety of track at weak points of the conventional line.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.685-694
• /
• 2016

In this study, the thermal degradation behavior of biomass during torrefaction was studied by thermogravimetric and byproduct gas analysis. Torrefaction temperature, time, and heating rate were $220{\sim}300^{\circ}C$, 110 min, and $10{\sim}30^{\circ}C/min$, respectively. The degradation rate of yellow poplar was 8.01~8.81% at $220^{\circ}C$ and 71.86~77.38% at $300^{\circ}C$ depending on heating rate. The degradation rate significantly increased at temperature over $240^{\circ}C$. On the other hand, degradation rate of larch was relatively low as 49.58~54.15% at $300^{\circ}C$. The activation energy of yellow poplar was 87.32~91.24 kJ/mol; these values did not significantly change with heating rate. The activation energy of larch was 83.85~91.60 kJ/mol. The major components of the gas generated during torrefaction were derived from hemicellulose. The component types and concentrations increased with torrefaction severity. High concentrations of furfural and acetic acid were detected during torrefaction of yellow poplar.