• 한국기계가공학회지
• /
• 제3권2호
• /
• pp.67-72
• /
• 2004

Electro-Rheological(ER) fluids consist of suspensions of fine polarizable particles In a dielectric oil, which upon application of an external electric field control take on the characteristics of the Bingham solid. In this study, the temperature dependence of the viscosity was Investigated for an ER fluid consisting of 35 weight % of zeolite particles in hydraulic oil 46cSt. Thermal activation analysis was performed by changing the ER fluid's temperature from $-10^{\circ}C$ to $50^{\circ}C$. According to the analysis, the activation energy for flow of the ER fluid was 79.6 kJ/mole without applying electric field. On the other hand, with the electric field of 2kV/mm, the linearity between viscosity and temperature was not existed By changing the temperatures the viscosity (or shear stress) versus shear rates were measured. In this experiment shear rates were increased from 0 to $200s^{-1}$ in 2 minutes. Generally, the hydraulic oil 46cSt will be operated at the temperature of about $40^{\circ}C$, thus, the ER fluid's electric field dependence of viscosity was examined at this temperature. Also, an influence of adding the dispersant(Carbopl 940) on ER effect was discussed.

• 한국식품과학회지
• /
• 제18권5호
• /
• pp.364-371
• /
• 1986

High-ester pectin을 HCI 단독 또는 HCI 과 $NH_4OH$를 병용하여 demethylation 시킨뒤 얻어진 low-ester pectin(LM pectin)으로 gel을 제조하였다. LM pectin gel의 단단함과 강도(强度)를 측정한 결과 HCI로 처리된 LM pectin gel은 일반적으로 강도(强度)가 약하고 거칠며 탄력이 없었다. 반면 $HCl-NH_4OH$로 처리한 LM pectin gel은 텍스쳐가 부드럽고 탄력이 좋았다. 물리적 성질에 대한 LM pectin의 화학적 조성의 상관 관계에서 단단함(Sag값)에 대한 ester함량 및 분자량, 그리고 강도(强度)(puncture stress)에 대한 amide 및 ester함량 EH는 분자량 간에는 유의성 있는 관계가 밝혀졌다. 상관성이 높은 화학적 인자에서 LM pectin gel의 물리적 성질을 예측할 수 있는 관계식을 산출하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.255-260
• /
• 2004

Recently, the technologies related to the swash plate type oil hydraulic piston pump are requiring extreme technologies to overcome the limit of high efficiency in cope with high speed and pressure, and are devoted to compact the unit, to gain low noise level, and to adopt electronic technologies, and the question regarding to maximize the mechanical efficiency, that is, to minimize the torque loss by minimizing the leakage loss in the relative sliding region but these are in trade-off relation that tribological responding is very difficult. Cylinder block-valve pate in high speed relative sliding motion has the characteristics that should be extremely controlled for the optimization of these leakage loss and mechanical efficiency, and pressure resistance designing of them is important for high pressure performance. But, studies on the stress analysis of these parts have not been performed briskly, so in this paper the stress distribution and the region where the highest displacement appears are described through the static stress analysis using CATIA V5. Through the future studies on these theme, it has the purpose of finding the suitable materials for the other parts as well as cylinder block and valve plate, in cope with high pressure operation through the stress analysis with the most similar conditions for the practical operation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.688-688
• /
• 2013

Al-doped ZnO (AZO) thin films have attracted a lot of attention as a cheap transparent conducting oxide (TCO) material that can replace the expensive Sn-doped In2O3. In particular, AZO thin films are widely used as a window layer of chalcogenide-based thin film solar cells such as Cu(In,Ga)Se2 and Cu2ZnSnS4 (CZTS). Mostly important requirements for the window layer material of the thin film solar cells are the high transparency and the low sheet resistance, because they influence the light absorption by the activelayer and the electron collection from the active layer, respectively. In this study, we prepared the AZO thin films by RF magnetron sputtering using a ZnO/Al2O3 (98：2wt%) ceramic target, and the effect of the sputtering condition such as the working pressure, RF power, and the working distance on the optical, electrical, and crystallographic properties of the AZO thin films was investigated. The AZO thin films with optimized properties were used as a window layer of CZTS thin film solar cells. The CZTS active layers were prepared by the electrochemical deposition and the subsequent sulfurization process, which is also one of the cost-effective synthetic approaches. In addition, the solar cell properties of the CZTS thin film solar cells, such as the photocurrent density-voltage (J-V) characteristics and the external quantum efficiency (EQE) were investigated.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권2호
• /
• pp.299-306
• /
• 2008

This study was designed to develop microencapsulated Korean mistletoe extract, to determine the stability in vitro and to examine its application in milk. Coating materials used were polyglycerol monostearate (PGMS) and medium-chain triacylglyderol (MCT). The highest efficiency of microencapsulation was 78.3% with 15:1:40 (w/w/v) as PGMS : mistletoe extract : distilled water and 66.1% with 15:1 (w/w) as MCT : mistletoe extract. The size of microcapsule was about 30.0 and $19.5{\mu}m$ with PGMS and MCT, respectively. When microcapsules of mistletoe extract were incubated in simulated gastric fluid at pH 2 for 60 min, 14.8 and 17.2% of lectin was released from capsules which were coated with PGMS and MCT, respectively. Comparatively, 83.2 and 87.3% of lectin was released in simulated intestinal fluid (pH 8) after 60 min incubation of capsules coated with PGMS and MCT, respectively. The subsequent study determined the changes of physicochemical and sensory characteristics of milk with fortification of the mistletoe extract microcapsules during 12 day storage. TBA value was significantly lower in microcapsule-added groups than in the uncapsulated mistletoe extract-added group during the storage. When 100 ppm microencapsulated mistletoe extract was added, the L-, a- and b- values and viscosity were not significantly different from those of the control. In addition, the release of lectin from mistletoe extract over 12 days was 8.3 and 9.5 mg/100 ml in milk containing microcapsules made by PGMS and MCT, respectively. All sensory attributes showed a significant difference in uncapsulated mistletoe extract-added milk compared with other groups. The present study indicated that microcapsules of Korean mistletoe extract could be applied to milk and microcapsules coated with PGMS were effectively released in a simulated intestinal environment.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권11호
• /
• pp.4837-4844
• /
• 2016

Objectives: To describe the survival experience of cervix cancer patients in a screened rural population in India. Methods: Included 558 cervical cancer patients diagnosed in 2000-2013 in a cohort of 100,258 women invited for screening during 2000-2003. The primary end point was death from cervical cancer. We used the Kaplan-Meier method to estimate cumulative observed survival and Cox proportional hazards regression to assess the effect of patient characteristics on survival after diagnosis. Results: Of the 558 cases included, 143 (26%) and 114 (20%) were diagnosed in stages IA and IB respectively; 252 (45.2%) were dead, and 306 (54.8%) were alive at the last follow-up. The overall 5-year observed survival was 60.5%. The 5-year survival of stage IA patients was 95.1% and 5.3% for stage IV patients. All surgically treated stage IA patients, 94.1% of stage IB patients receiving intracavitary radiotherapy, 62% of stage IIB, 49% of stage III and 25% of stage IV patients receiving radiotherapy survived for 5 years. Conclusion: Higher 5-year survival in our study than elsewhere in India is due to the high proportion of early stage cancers detected by screening combined with adequate treatment, resulting into a favourable prognosis.

• Nuclear Engineering and Technology
• /
• 제52권4호
• /
• pp.827-834
• /
• 2020

Damage of tungsten due to helium ions of a PF device was studied. The tungsten was analyzed by SEM and AFM after irradiation. SEM revealed fine bubbles of helium atoms with diameters of a few nanometers, which join and form larger bubbles and blisters on the surface of tungsten. This observation confirmed the results of molecular dynamics simulation. SEM analysis after etching of the irradiated surface indicated cavities with depth range of 35-85 nm. The average fluence of helium ion of the PF device was calculated about 5.2 × 10¹⁵ cm^-2 per shot, using Lee code. Energy spectrum of helium ions was estimated using a Thomson parabola spectrometer as a function of dN/dE ∝ E^-2.8 in the energy range of 10-200 keV. The characteristics of helium ion beam was imported to SRIM code. SRIM revealed that the maximum DPA and maximum helium concentration occur in the depth range of 20-50 nm. SRIM also showed that at depth of 30 nm, all of the tungsten atoms are displaced after 20 shots, while at depth of higher than 85 nm the destruction is insignificant. There is a close match between SRIM results and the measured depths of cavities in SEM images of tungsten after etching.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2007년도 한국음성과학회 공동학술대회 발표논문집
• /
• pp.211-212
• /
• 2007

Stroke makes several physical deficits. Dysarthria is one of the most difficult problems in conventional medicine because of the weakness of neuromotor control. The purpose of this study is to find the acoustic characteristics of acupuncture therapy effects on post-stroke dysarthria. Seven patients with stroke(infarction or hemorrhage) were selected by CT or MR imaging. The authors applied acupuncture therapy by inserting needles into 8 acupuncture points, ipsilateral ST4, ST6 and contralateral LI4, ST36 on facial palsy side, and CV23, CV24, bilateral "Sheyu" for 4 weeks. Speech sample were composed of five simple vowels /a,e,i,o,u/ and meaningless polysyllabic words CVCVC(C: stops, affricated, fricative sounds, v: /e/). .VOT, total duration of each speech samples and vowel formant (F1&F2) were analyzed on Spectrogram. The results are as follows: 1. VOT of bilabial and velar stops was decreased post treatment. The VOT of bilabial glottalized pre and post treatment were statistically significant (p < 0.05). 2. Total duration of polysyllabic words was decreased post treatment. Decrement of total duration containing the bilabial was statistically significant (p<0.05). 3. First formant of round vowel /o/ pre and post treatment was statistically significant (p<0.05).

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권5호
• /
• pp.633-636
• /
• 2002

Six adult Garole rams maintained under a semi-intensive system were used as semen donors for this study. Semen was collectied daily during the monsoon season with the help of an artificial vagina and examined for its quality characteristics. Ejaculates of thick consistency, rapid wave motion, ${\geq}80%$ motility and intense movement of motile spermatozoa were diluted at the rate of 1:1 with egg yolk McIllvaine glucose diluent at $30^{\circ}C$ in water bath. Estrus in ewes was detected by parading aproned rams of proven vigour at 12 h intervals. The ewes (54 Malpura and 23 Avikalin) in estrus were artificially inseminated with fresh diluted ram semen. The overall conception rate was 94.8%, (range 91.7 to 100%). The overall lambing percent was 80.5 with a range of 75.0 to 84.6%. There was no significant (p>0.05) difference in lambing and conception rate because of individual rams. Fertility was significantly lower (p<0.05) in ewes of less than two years and more than six years of age. Breed (Malpura and Avikalin) effect was not observed in conception and lambing rate (p>0.05). No significant difference (p>0.05) in birth weight and 12 month weight was observed between Garole${\times}$Avikalin and Garole${\times}$Malpura crossbred lambs but there was significant (p<0.05) difference at three month and six months body weight of both the crossbred lambs.

• Journal of Microbiology and Biotechnology
• /
• 제7권2호
• /
• pp.114-120
• /
• 1997

Microorganisms producing xylanase were screened for the enzymatic production of xylo-oligo saccharides from xylan. One of the bacteria isolated from compost produced an endoxylanase extracellularly. The bacterium was identified as Bacillus sp. according to its taxonomic characteristics examined. Xylanase production reached upto 5 U/ml after 22 h of culture in LB medium at $30^{\circ}C$. The xylanase was purified by ammonium sulfate precipitation and gel filtration. The molecular weight of the xylanase was estimated to be 20,400 by SDS-PAGE. Optimal temperature and pH for the xylanase activity was $60^{\circ}C$ and 6.5, respectively. The enzyme was stable at temperatures upto $40^{\circ}C$ and pH values from 4 to 10. The xylanase was completely inhibited by the addition of 2 mM mercury ion. Apparent $K_m$ and $V_max$ values for oat spelt xylan were 9.2 mg/ml and 1954 U/mg protein, respectively. For birchwood xylan, the values were 6.3 mg/ml and 1009 U/mg protein. The predominant products of the xylan hydrolysis were xylobiose, xylotriose and xylotetraose, indicating that the enzyme is an endoxylanase. Upto $85{\%}$ of the initially added enzyme (2 U/ml) was bound to 50 mg/ml of the insoluble fraction of oat spelt xylan after incubation at $30^{\circ}C$ for 30 min.