• 천문학회보
• /
• 제24권2호
• /
• pp.71-71
• /
• 1999

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.211-212
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.999-1000
• /
• 2009

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.79-82
• /
• 2004

In general, compressors for refrigerators are major noise source in home environment. The vibration originated from a pump of a compressor can make noise through suspension springs and a LDT(Line Discharge Tube). Especially for the inverter motor driven compressor, the vibration is more serious than it of the constant speed compressors. Because the operation frequency range of an inverter motor driven compressor is very wide from 1600 rpm to 4200 rpm. In this paper, we propose the numerical model to reduce vibration by designing weight balancers and grommets. Results for analytical investigations on the exciting force and moment at the pump mass center, weight balancers and exciting frequency variation are presented.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.253-257
• /
• 2005

A tube hydroformability testing system was designed and fabricated so as to observe the forming process and to apply forming condition along arbitrarily pre-programmed internal pressure-axial feed path. The forming limit diagram of A6063 extruded tube, of 40.6 mm outer diameter and 2.25 mm thickness, was successfully obtained through free bulging and T-forming tests except the region of high positive minor strain. It is found that the data points marked on the FLD are mostly located near the strain paths from the finite element analysis excluding the cases of large axial feed. There exist data points even in the area beyond the uniaxial tension mode, since the reduction in thickness decreases due to the axial feed. The forming limit from T-forming test was considerably lower than that from free bulge test. It seems because the deformation is localized at the pole.

• 대한수학회지
• /
• 제33권2호
• /
• pp.249-258
• /
• 1996

Analysis by the method of characteristics shows that if f and $u_0$ are smooth and $u_0$ has compact support, then the Hamilton-Jacobi equation $$ (H-J) ^{u_t + f(u_x) = 0, x \in R, t > 0, } _{u(x, 0) = u_0(x), x \in R, } $$ has a unique $C^1$ solution u on some maximal time interval $0 \leq t < T$ for which $lim_{t \to T}u(x, t) exists uniformly; but this limiting function is not continuously differentiable.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.604-607
• /
• 1989

In this paper, the commutating devices of the forced commutating circuit and the relation between load current and source voltage are theoretically analyzed, by this approach commutating condition is considered. As a result some basic design methodes of commutating circuit are presented, whitch commutating loss becomes low and commutating failure is not occured.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2516-2518
• /
• 2001

The quantization of the LPC parameters is a very important aspect of the speech compression algorithm. This paper analyzes the quantization effect of the LPC coefficients and presents the implementation of a fixed-point CELP coder based on the LPC analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.926-928
• /
• 2002

Much progress has been made during the past two decades in numerical analysis of electromagnetic forces in molded case circuit breakers (MCCB) for increasing arc voltage due to the change of the configuration of arc chute and fixed conductor. A review on this topic is given. which mainly covers the past research activities associated with that of our company.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권8호
• /
• pp.1065-1070
• /
• 2006

The avian uncoupling protein (avUCP) is a member of the mitochondrial transporter superfamily that uncouples proton entry in the mitochondrial matrix from ATP synthesis. The sequencing analysis method was used to identify nucleotide polymorphisms within the avUCP gene in Korean native chicken (KNC). This study identified ten single nucleotide polymorphisms (SNPs) in the avUCP gene. We analyzed the SNPs of the avUCP gene to investigate whether polymorphism in the gene might be responsible for quantitative variations in economic traits in KNC. Three significant polymorphic sites for economic traits were avUCP C+282T (mean body weight, p<0.05), avUCP C+433T (daily percent lay, p<0.05), and avUCP T+1316C (daily percent lay, p<0.05). The frequency of each SNP was 0.125 (C+282T in avUCP gene exon 1 region), 0.150 (C+433T in avUCP gene intron 1 region), and 0.15 (T+1316C in avUCP gene exon 3 region), respectively. Among the identified SNPs, one pair of SNPs (genotype CC, C+282T and TT, avUCP C+433T) showed the highest daily percent lay (p<0.05) and mean body weight (p<0.05) and the frequency was 0.067. This study of the avUCP gene could be useful for genetic studies of this gene and selection on economic traits for KNC.