• 한국해양학회지:바다
• /
• 제12권3호
• /
• pp.125-132
• /
• 2007

조식동물-해조류 상호작용의 크기 분포를 추정하기 위하여 12종의 조식동물에 대하여 개체 당 일평균 섭식률 (PCGR, per capita grazing rate, g seaweeds/individual/day)을 구하고, 다른 종들의 섭식률을 추정할 수 있는 회귀모형을 만들었다. 조식동물의 생체량과 사제곱근 변환 PCGR은 power curve($y=0.2310x^{0.3290}$)에 적합되었고 모형의 r값은 0.8864였다. 이로부터 조식동물의 PCGR 변동은 생체량과 관계가 있으며, 섭식 효율성은 관찰된 생체량 범위내에서 균일하지 않다는 것이 파악되었다. 따라서 각 종별 생체량 효과가 보정된 PCGR을 추정하였고, 작은 몸체를 갖는 종일수록 보다 효율적인 섭식자인 것으로 밝혀졌다. 서식밀도를 감안한 개체군 별 상호작용(grazing impact, $mg/m^2$)을 계산한 결과, 해조장에 가장 큰 영향을 갖는 개체군은 군소(Aplysia kurodai, 약 $2,513mg/m^2$)인 것으로 나타났고, 다음은 둥근성게(Strongylocentrotus nudus, 약 1,500 mg/)와 새치성게(S. intermedius, $733mg/m^2$) 등인 것으로 나타났다. 단각류 가운데 단위 면적당 밀도가 4,000 개체 이상인 멜리타옆새우류, Elasmopus sp.와 2,000 개체 이상인 가시꼬리육질꼬리옆새우붙이, Jassa falcata의 섭식량은 각각 3.435와 $1.697mg/m^2/day$인 것으로 나타났다. 본 연구에서 추정한 조식동물 군집의 종 조성과 서식 밀도가 동일할 때 상호작용의 총합은 $5,045mg/m^2/day$인 것으로 나타났다. 실험과 모형 연구로부터 성게류와 군소 외에도 적잖은 상호작용이 높은 밀도를 갖는 많은 수의 종들로부터 해조류에 가해지고 있음을 추정할 수 있었다. 성게류의 경우 3 개체/$m^2$의 평균 서식밀도에서 발생하는 섭식량은 국내 천해 양식업의 평균 해조류 생산량(약 5 ton/ha)을 초과하는 것으로 예측되었다. 미소 갑각류 역시 낮은 포식압 조건에서 서식밀도가 증가하면 적잖은 충격(해조류 생산량의 약 16%)을 가할 것으로 예측되었다. 해조장에 서식하는 조식동물의 밀도가 어류에 의해 강도 높게 조절되고 있음을 감안하면, 어류와 조식동물 간 상호작용에 대한 인간의 간섭(어류의 남획 등)은 해조장에 커다란 변화를 유발할 수 있는 잠재력을 가질 것으로 예상된다.

• 수산해양기술연구
• /
• 제22권4호
• /
• pp.61-70
• /
• 1986

In accordance with a rapid growth of demani on aquatic animals, researches of the unused fishery resources On the deep sea b~d in the Korean Waters has been and will be required. The authors carried out a series of fishing experiments to investigate the available resources and to find the effective fishing method on the deep sea bed of the Korean East Sea. In the experiments, 19 kinds of traps which are different from each other in shape, mesh size and entrance diameter were used. The fishing experiments w~r;; carried out in four areas of 20Dm, 600.'11, 800m and 1000.'11 deep respectively, by the Pusan 402 (30:) GT) and the Pusan 403 (279GT), the training ships of National Fisheries University of Pusan, during August, 1986. The catc~ were analyzed with the size, the depth and the construction of traps. The results obtained can be summarized as follows: 1. Main species of the catch w~re pink shrimp, Pandalus bolelis, a kind of welks, Buccimum striatissimum and a kind of larg~ crabs. Chiono8cetes japonicus and the another species were few. 2. The CPUE value (expressed by the number of catch per trap in this paper) of pink shrimp was the highest in the depth of 20J-n around, and the value in the depth of 600.'11 or more decreased gradually with an increase of the depth. But, the value of Buccimum straitissimum was much higher in the depth of 6:J:)!1I or more than that in the depth of 200m around. On the other hand, the value of Chion:Jecetes japonjcus was very low in general. 3. The iniividual body size of the catch differed with the depth. Pink shrimps caught in the depth of 200m around were smaller than those in the depth of 600.'11 or more. In contrast with this, Baccimum striatissim:t.m caught in the depth of 200m around were larger than those in the depth of 600.'11 or more. 4. Depending on the selection curve in Ishida's method for the mesh size of trap webbing, the carapace length of pink shrimp and the shell length of Buccimum striatissimum which are equivalent to 100% relative catching efficiency can be estimated about 3.5cm and 6.5cm or so respectively. 5. The number of catch of pink shrimp and Buccimum striatissimum by the 60.'1'1.'11 entrance diameter of trap were less than that by the 90mm, 120mm and 150mm, even thogh the diffierence am~r, g 9:Jmm, 120.'11.'11 and 150:1'.'11 are not so large.

• 천문학회지
• /
• 제28권1호
• /
• pp.31-43
• /
• 1995

We present UBVRI CCD photometry of the Type Ie supernova SN 19941 in M51 which was discovered on April 2, 1994 (UT). UBVRI CCD photometry of SN 1994 I were obtained for the period of the first two months from April 4, 1994, using the Seoul National University Observatory 60 cm telescope. The light curves of SN 19941 show several interesting features: (a) SN 19941 reaches the maximum brightness at B-band on April 8.23 (B = 13.68 mag), at V-band on April 9.10 (V = 12.89 mag), and at I-band on April 10.32 (I = 12.48 mag); (b) The light curves around the maximum brightness are much narrower than those of other types of supernovae; (c) The light curves after the peak decline more steeply than those of other types of supernovae; and (d) The colors get redder from $(V-R){\approx}0.2 mag ((V - I){\approx} 0.3 mag, (B - V){\approx}0.7 mag)$ on April 4 to $(V-R){\approx}0.6 mag ((V-1){\approx}0.9 mag, (B-V){\approx}1.3 mag)$ on April 18. Afterwards (V - R) colors get bluer slightly $(by\~0.005 mag/day)$, while (V-I) colors stay almost constant around $(V-1){\approx}1.0 mag$. The color at the maximum brightness is (B-V)=0.9 mag, which is $\~1$mag redder than the mean color of typical Type la supernovae at the maximum brightness. The light curves of SN 1994I are similar to those of the Type Ie supernova SN 1962L in NGC 1073. Adopting the distance modulus of $(m-M)_0 = 29.2 mag$ and the reddening of E(B - V) = 0.45 mag [Iwamoto et al. 1994, preprint for ApJ], we derive absolute magnitudes at the maximum brightness of SN 1994I, Mv(max) = -17.7 mag and MB(max) = -17.4 mag. This result shows that SN 1994I was $\~2$mag fainter at the maximum brightness compared with typical Type Ia supernovae. A narrower peak and faster decline after the maximum in the light curve of SN 1994I compared with other types of supernovae indicate that the progenitor of SN 1994I might be a lower mass star compared with those of other types of supernovae.

• 소성∙가공
• /
• 제14권4호
• /
• pp.384-391
• /
• 2005

The nickel-based alloy Nimonic 80A possesses the excellent strength, and the resistance against corrosion, creep and oxidation at high temperature. Its products are used in aerospace engineering, marine engineering and power generation, etc. Control of forging parameters such as strain, strain rate, temperature and holding time is important because change of the microstructure in hot working affects the mechanical properties. Change of the microstructure evolves by recovery, recrystallization and grain growth phenomena. The dynamic recrystallization evolution has been studied in the temperature range of $950\~1250^{\circ}C$ and strain rate range of $0.05\~5s^{-1}$ using hot compression tests. The metadynamic recrystallization and grain growth evolution has been studied in the temperature range of $950\~1250^{\circ}C$ and strain rate range $0.05,\;5s^{-1}$, holding time range of 5, 10, 100, 600 sec using hot compression tests. Modeling equations are proposed to represent the flow curve, recrystallized grain size, recrystallized fraction and grain growth phenomena by various tests. Parameters in modeling equations are expressed as a function of the Zener-Hollomon parameter. The modeling equation for grain growth is expressed as a function of the initial grain size and holding time. The modeling equations developed were combined with thermo-viscoplastic finite element modeling to predict the microstructure change evolution during hot forging process. The grain size predicted from FE simulation results is compared with results obtained in field product.

• Journal of Biosystems Engineering
• /
• 제15권3호
• /
• pp.207-218
• /
• 1990

Grains display characteristics of both elastic bodies and viscous fluids when they are subjected to mechanical treatments in harvesting, handling, and processing. This viscoelastic behavior of grains when mechanically stressed must be fully understood to establish maximum machine efficiency and have a minimum degree of grain damage and the highest quality of the final product. The studies were conducted to examine the effect of the moisture content, the loading rate and the initial deformation on the stress relaxation behavior of whole kernel of rough rice, and develop the rheological model to represent its stress relaxation behavior. The following results were obtained from the study. 1. Moisture content had the greatest influence on the initial portion of the relaxation curve. With elapsing time the lower moisture content resulted in the lower residual stress for the Japonica-type rough rice and vice versa for the Indica-type rough rice. But within the ranges of moisture content tested, the degree of stress relaxation per unit strain on the Indica-type rough rice was a little higher than those on the Japonica-type rough rice. 2. The slower loading rate resulted in less initial stress. The decreasing trend of residual stress for all the samples tested with increasing loading rate was shown. 3. The higher initial deformation for all the samples resulted in less initial stress. The increasing of amount of stress relaxation per unit strain with increase of initial stress indicated that viscoelastic properties of rough rice depended not only upon duration of load applied but also initial stress applied. This means that rough rice is nonlinear viscoelastic material. 4. The compression stress relaxation properties of rough rice kernel can be described by a generalized Maxwell model representing by the Maxwell elements.

• 한국미생물·생명공학회지
• /
• 제20권6호
• /
• pp.687-692
• /
• 1992

혼합배양중의 각 미생물의 생균수 측정은 순수배양보다 훨씬 복잡하다. 특히 두 균주의 크기가 비슷한 경우에는 사용할 수 있는 방법이 더 제한된다. 본 연구에서는 두 균의 크기가 비슷한 경우에도 적용될 수 있는 간단한 생균수 측정방법을 개발하였다. 미생물 배양액의 산소흡수속도(OUR)는 세포수에 비례하며 이때의 비례상수인 최대 비산소흡수속도( maximum specific OUR)를 알고 있으면 배양액의 OUR을 측정함으로써 간접적으로 생균수를 구할 수 있게된다. 혼합배양의 경우 산소흡수속도는 각 미생물의 호흡속도의 합이 되며, 각 미생물의 호흡속도가 서로 다르고 또한 온도의존성이 다르다면 호흡속도의 측정을 이용하여 각 생균수를 간접적으로 측정할 수 있다.

• Clinical and Experimental Reproductive Medicine
• /
• 제9권1_2호
• /
• pp.43-53
• /
• 1982

여성의 난소기능은 뇨중 Oestrone-3-glucuronide를 간편한 solid-phase 의 화학발광성 면역학적 측정법 (Chemiluminescence Imrnunoassay(CIA) 에 의하여 그 기능이 탐지될 수 있다. Oestrone-3-g1ucuronyl-6-bovine serum albumine에 대한 antiserum의 IgG fraction은 polystyrene 실험관벽에 흡착시켰으며, 항원으로서는 est r one-3- gl ucuronyI-6-aminoethyl-ethyl-isoluminol 을 항원 (antigen) 에 labeI 시킨 것이다. 시험 대상물인 뇨는 매일아침뇨(early morning urine) 을 희석 (1:1000 V/V)한 후 100mcl 를 취하여 이를 각기 이중분석액으로 택하였다. 시험관 내에서 결합반응 (1 hour at $4^{\circ}C)이 일어난 후에는 시험관내의 액체를 전부 흡입 폐기시켰으며, 항체반응이 일어난 후 ( antibody-bound fraction )에는 완충액 (400mcl)으로 한번 세척시켰다. 그후 염화수산화물(2N , 200mcl)을 가지고 $22^{\circ}C$에 60 분간 방치 혼합케 한 후 효소(microperoxidase) 와 과산화수소를 가하면서 산화작용에서 발생되는 발광양을 10초동안 측정하여 그 결과를 분석하였다. 위에 기술한 분석방법을 평가하면 다음과 같은 결론을 얻었다. Calibration curve sensitivity$3.12{\pm}0.75$ PG/tube ($mean{\pm}SD$)였고, lntra-assay precision(CV%) 9.52 (20 replicates;$38.4{\pm}3.66$nmol/1) 와 8.81 (15 replicates; $102.4{\pm}8.82$nmol/1)였다. Inter-assay precision(CV%) 은 11.9 (mean of 4 pools-7.03, 23.16, 52.11 과 117.53 nmol/1)로 2개월 동안에 걸쳐 시행되었고, 평균 비이어스(mean bias)는 -0.78 로 28에서 448 nmol 범위로서 매일아침 "뇨"의 차이분(different aliquots)은 좋은 결과를 얻었다. 건강한 여성으로부터 채취된 뇨중 Oestrone-3-glucuronide 의 농도(nmol/1)를 보면 월경주기의 여포기와 배난기 및 황체기에 있어서 각기 $40.2{\pm}9.9$ , $102.3{\pm}39.4$와 $84.3{\pm}13.3$nmol/1였다. 이와같은 결과는 동일한 검사뇨를 방사면역학적 방법(RIA)으로 측정 (6 menstrual cycle)한 결과와 유사한 측정치를 얻으므로서 간편하고 진보된 좋은 방법중의 하나라고 사료되는바이다.

• Journal of Microbiology and Biotechnology
• /
• 제22권9호
• /
• pp.1185-1192
• /
• 2012

This study investigated the hydrocarbonoclastic microbial community present on weathered crude oil and their ability to degrade weathered oil in seawater obtained from the Gulf St. Vincent (SA, Australia). Examination of the native seawater communities capable of utilizing hydrocarbon as the sole carbon source identified a maximum recovery of just $6.6{\times}10^1\;CFU/ml$, with these values dramatically increased in the weathered oil, reaching $4.1{\times}10^4\;CFU/ml$. The weathered oil (dominated by > $C_{30}$ fractions; $750,000{\pm}150,000mg/l$) was subject to an 8 week laboratory-based degradation microcosm study. By day 56, the natural inoculums degraded the soluble hydrocarbons (initial concentrations $3,400{\pm}700mg/l$ and $1,700{\pm}340mg/l$ for the control and seawater, respectively) to below detectable levels, and biodegradation of the residual oil reached 62% ($254,000{\pm}40,000mg/l$) and 66% ($285,000{\pm}45,000mg/l$) in the control and seawater sources, respectively. In addition, the residual oil gas chromatogram profiles changed with the presence of short and intermediate hydrocarbon chains. 16S rDNA DGGE sequence analysis revealed species affiliated with the genera Roseobacter, Alteromonas, Yeosuana aromativorans, and Pseudomonas, renowned oil-degrading organisms previously thought to be associated with the environment where the oil contaminated rather than also being present in the contaminating oil. This study highlights the importance of microbiological techniques for isolation and characterisation, coupled with molecular techniques for identification, in understanding the role and function of native oil communities.

• 대한기계학회논문집A
• /
• 제25권3호
• /
• pp.510-519
• /
• 2001

The tensile and fracture toughness tests have been conducted to investigate the degradations of mechanical properties induced mainly by neutron irradiations in Zr-2.5Nb CANDU pressure tube materials operated in Wolsung Unit-1. the tests were performed at room, 150, 200, 250, 300 $\^{C}$ for the irradiated and unirradiated specimens in hot cell. The specimens were directly machined from the tube retaining original curvature using specially designed electric discharge machine(EDM). From the tensile tests of the irradiated specimens, it was found that tensile strength was increased and total elongation was decreased compared to those of the unirradiated ones. The active voltages in the fracture toughness tests for the irradiated showed the discontinuous abrupt increases caused by crack jumping in lower temperature. In the crack resistance curves we found the stable crack growth in the unirradiated, whereas the unstable and three crack growth stages in the irradiated specimens due to the accumulated irradiation defects. The various fracture characteristic values in the irradiated are remarkably lower than those of the unirradiated. Through the fractography, we found in the irradiated that smaller dimple and shorter fissures than the unirradiated, and that the fractured surface had three regions that were flat, transition and slant/shear area. These can explain the difference in the crack growth characteristic values of the irradiated and the unirradiated ones.

• The Plant Pathology Journal
• /
• 제35권6호
• /
• pp.654-661
• /
• 2019

The soybean cyst nematode, Heterodera glycines, is a major plant-parasitic nematode that has caused important economic losses to Korea's soybean production. Four species of cyst nematodes, H. schachtii, H. glycines, H. trifolii, and H. sojae, all belong to schachtii group are coexist in field soil in Korea. The rapid identification of the nematode is crucial for preventing crop damage and in decision making for controlling this nematode. This study aimed to develop a species-specific primer set for quantitative PCR (qPCR) assay of H. glycines. The specific primer set (HGF1 and HGR1) for H. glycines was designed based on the cytochrome c oxidase subunit I (COI) sequence of mitochondrial DNA. After optimization, it is possible to identify the H. glycines using a qPCR assay with DNA extracted from a single cyst and single second-stage juvenile (J2). The specificity was confirmed by the absence of SYBR fluorescent signals of three other Heterodera species. A serial dilution of DNA extracted from a single cyst was obtained for the sensitivity test. The result showed that the standard curve of the test had a highly significant linearity between DNA concentration and Ct value (R² = 0.996, slope = -3.49) and that the detection limit concentration of DNA of the primer set was 10 pg of DNA per reaction. Our findings suggested that H. glycines could be distinguished from H. sojae and other Heterodera species when a qPCR assay is used with a specific primer set.