• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.50-57
• /
• 2007

Shocks are excited by impulsive forces and cause discomfort in vehicles. Current standards define means of evaluating shocks and predicting their discomfort, but the methods are based on research with a restricted range of shocks. This experimental study was designed to investigate the discomfort of seated subjects exposed to a wide range of vertical shocks. Shocks were produced from the responses of one degree-of-freedom models, with 16 natural frequencies (from 0.5 to 16 Hz) and four damping ratios (0.05 0.1, 0.2 and 0.4), to a hanning-windowed half-sine force inputs. Each type of shock was presented at five vibration dose values in the range $0.35\;ms^{-1.75}$ to $2.89\;ms^{-1.75}$. Fifteen subjects used magnitude estimation method to judge the discomfort of all shocks. The exponent in Stevens' power law, indicating the rate of growth in discomfort with shock magnitude, decreased with increasing fundamental frequency of the shocks. At all magnitudes, the equivalent comfort contours showed greatest sensitivity to shocks having fundamental frequencies in the range 4 to 12.5 Hz. At low magnitudes the variations in discomfort with the shock fundamental frequency were similar to the frequency weighting $W_b$ in BS 6841, but low frequency high magnitudes shocks produced greater discomfort than predicted by this weighting. At some frequencies, for the same unweighted vibration dose value, there were small but significant differences in discomfort caused by shocks having different damping ratios. The rate of increase in discomfort with increasing shock magnitude depends on the fundamental frequency of the shock. In consequence, the frequency-dependence of discomfort produced by vertical shocks depends on shock magnitude. For shocks of low and moderate discomfort, the current methods seem reasonable, but the response to higher magnitude shocks needs further investigation.

• Korean Journal of Food Science and Technology
• /
• v.10 no.2
• /
• pp.181-188
• /
• 1978

To study on the changes in saponins from callus mass by tissue culture, the callus was derived from the petiole of Korean Ginseng (Panax Ginseng C.A. Meyer) and cultivated on Murashige and Skoog's agar medium supplemented with 2.4-dichlorophenoxyacetic acid and kinetin for 8 months. Then, well-grown callus was analyzed for its components estimation. The results obtained are as follows: (1) When saponins isolated from callus mass were chromatographed on a silca gel plate, and determined by the thinchrograph TFG-10, the ratio of Rb, c to Rg(f) in saponins was 2.16 to 1 and Rb, c, d to Re, g (f) was 1 to 1.63, while in the case of saponins from the root of Panax Ginseng grown by soil culture, the ratio of Rb, c to Rg(f) was 1.03 to 1 and the ratio of Rb, c,d to Re, g(f) was 1 to 1.17. (2) Sapogenins were obtained from the hydrolysates of saponins, and determined by thinchrograph TFG-10. The ratio of panaxadiol to panaxatriol in sapogenins from callus saponins was 2.66 to 1, while the ratio of panaxadiol to panaxatriol in sapogenins from ginseng root saponins was 1.86 to 1. From the results above mentioned, we concluded that the relative contents of sapogenins in saponins from callus mass by tissue culture were different from those in saponins from ginseng root by soil culture.

• Journal of Animal Science and Technology
• /
• v.44 no.4
• /
• pp.383-390
• /
• 2002

The data were consisted of 1,262 records for carcass traits observed at Hanwoo steers from 1998 to 2001 at Namwon and Deakwanryung branch of National Livestock Research Institute, Rural Development Administration. Pedigrees of young bulls were traced back to search for magnifying inbreeding. Genetic parameters for carcass traits with Gibbs sampling in a threshold animal model were compared to estimates with REML algorithm in linear model. As the results, most of bulls were not inbred and sire pedigree group was non-inbred population. However, most of the bulls fell in some relationship with each other. Heritability estimates as fully posterior means by Gibbs samplers in threshold model were higher than those by REML in linear model. Furthermore, these estimates in threshold model using GS showed higher estimates than estimates using tested young bulls in previous study and same model. Heritability estimate by GS for marbling score was 0.74 and genetic correlation estimate between marbling score and body weight at slaughter was –0.44. Further study for correlation of breeding values between REML algorithm in linear model and Gibbs sampling algorithm in threshold model was needed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.3
• /
• pp.356-364
• /
• 2009

The current ruminant feeding models require parameterization of the digestion kinetics of carbohydrate fractions in feed ingredients to estimate the supply of nutrients from a ration. Using an automated gas production technique, statistically welldefined digestion rate of carbohydrate, including soluble carbohydrate, can be estimated in a relatively easy way. In this study, the gas production during in vitro fermentation was measured and recorded by an automated gas production system to investigate degradation kinetics of carbohydrate fractions of a wide range of ruminant feeds: corn silage, rice straw, corn, soybean hull, soybean meal, and cell mass from lysine production (CMLP). The gas production from un-fractionated, ethanol insoluble residue and neutral detergent insoluble residue of the feed samples were obtained. The gas profiles of carbohydrate fractions on the basis of the carbohydrate scheme of the Cornell Net Carbohydrate and Protein System (A, B1, B2, B3 and C) were generated using a subtraction approach. After the gas profiles were plotted with time, a curve was fitted with a single-pool exponential equation with a discrete lag to obtain kinetic parameters that can be used as inputs for modern nutritional models. The fractional degradation rate constants (Kd) of corn silage were 11.6, 25.7, 14.8 and 0.8%/h for un-fractioned, A, B1 and B2 fractions, respectively. The values were statistically well estimated, assessed by high t-value (>12.9). The Kd of carbohydrate fractions in rice straw were 4.8, 21.1, 5.7 and 0.5%/h for un-fractioned, A, B1 and B2 fractions, respectively. Although the Kd of B2 fraction was poorly defined with a t-value of 4.4, the Kd of the other fractions showed tvalues higher than 21.9. The un-fractioned corn showed the highest Kd (18.2%/h) among the feeds tested, and the Kd of A plus B1 fraction was 18.7%/h. Soybean hull had a Kd of 6.0, 29.0, 3.8 and 13.8%/h for un-fractioned, A, B1 and B2, respectively. The large Kd of fraction B2 indicated that NDF in soybean hull was easily degradable. The t-values were higher than 20 except for the B1 fraction (5.7). The estimated Kd of soybean meal was 9.6, 24.3, 5.0%/h for un-fractioned, A and B1 fractions, respectively. A small amount of gas (5.6 ml at 48 ho of incubation) was produced from fermentation of CMLP which contained little carbohydrate. In summary, the automated gas production system was satisfactory for the estimation of well defined (t-value >12) kinetic parameters and Kd of soluble carbohydrate fractions of various feedstuffs that supply mainly carbohydrate. The subtraction approach, however, should be applied with caution for some concentrates, especially those which contain a high level of crude protein since nitrogen-containing compounds can interfere with gas production.

• Journal of Navigation and Port Research
• /
• v.44 no.1
• /
• pp.44-52
• /
• 2020

More accurate forecasting of port cargo in the global long-term recession is critical for the implementation of port policy. In this study, the Busan Port container volume (export cargo and transshipment cargo) was estimated using the Vector Autoregressive (VAR) model and the vector error correction (VEC) model considering the causal relationship between the economic scale (GDP) of Korea, China, and the U.S. as well as ARIMA, a single volume model. The measurement data was the monthly volume of container shipments at the Busan port J anuary 2014-August 2019. According to the analysis, the time series of import and export volume was estimated by VAR because it was relatively stable, and transshipment cargo was non-stationary, but it has cointegration relationship (long-term equilibrium) with economic scale, interest rate, and economic fluctuation, so estimated by the VEC model. The estimation results show that ARIMA is superior in the stationary time-series data (local cargo) and transshipment cargo with a trend are more predictable in estimating by the multivariate model, the VEC model. Import-export cargo, in particular, is closely related to the size of our country's economy, and transshipment cargo is closely related to the size of the Chinese and American economies. It also suggests a strategy to increase transshipment cargo as the size of China's economy appears to be closer than that of the U.S.

• Safety and Health at Work
• /
• v.6 no.3
• /
• pp.174-183
• /
• 2015

The major purpose of this study is to construct a retrospective exposure assessment for benzene through a review of literature on Korea. Airborne benzene measurements reported in 34 articles were reviewed. A total of 15,729 individual measurements were compiled. Weighted arithmetic means [AM(w)] and their variance calculated across studies were summarized according to 5-year period intervals (prior to the 1970s through the 2010s) and industry type. Industries were classified according to Korea Standard Industrial Classification (KSIC) using information provided in the literature. We estimated quantitative retrospective exposure to benzene for each cell in the matrix through a combination of time and KSIC. Analysis of the AM(w) indicated reductions in exposure levels over time, regardless of industry, with mean levels prior to the 1980-1984 period of 50.4 ppm (n = 2,289), which dropped to 2.8 ppm (n = 305) in the 1990-1994 period, and to 0.1 ppm (n = 294) in the 1995-1999 period. There has been no improvement since the 2000s, when the AM(w) of 4.3 ppm (n = 6,211) for the 2005-2009 period and 4.5 ppm (n = 3,358) for the 2010-2013 period were estimated. A comparison by industry found no consistent patterns in the measurement results. Our estimated benzene measurements can be used to determine not only the possibility of retrospective exposure to benzene, but also to estimate the level of quantitative or semiquantitative retrospective exposure to benzene.

• The Korean Journal of Elementary Counseling
• /
• v.5 no.1
• /
• pp.139-158
• /
• 2006

The purpose of this study was to test the emotional intelligence development program and to verify the effects of the emotional intelligence development program for the increase of emotional intelligence and school life adaptation in elementary school students of single parent family To verify the previous hypotheses, 16 children of single parent family(experimental group I : n=8, control group 1 : n=8) and 16 children of two parent family(experimental group II : n=8, control group II : n=8) were selected at random, which are a total of high-grade students from P elementary school in J city, Jeon-buk province. Disposal about experimental group executed the emotional intelligence development program for the humanity education of Moon - yong - lin(1999) and the emotional intelligence development program which was reconstructed guidance for elementary school children of Her - seung - hee (2004) as the level of elementary school for 50 minutes, 16times, twice a week. In order to verify the effects after experiment, 1 collected materials for estimation by providing the subject children with questionaries about emotional intelligence and the ability of school life adaptation before and after the experiment, and then analyzed the average differences in number of marks between the experiment group and the control group before and after the experiment through and by using One-Way ANOVA, and SPSS WIN 12.0 program. The results of the study were as follows : First, there was significant increase between experimental group and control group received the emotional intelligence development program on emotional intelligence in statistic data(p<.01). Second, there was significant increase between experimental group and control group received the emotional intelligence development program on the school life adaptation in statistic data(p<.001). Third, there was no significant difference between the single parent family's children and the two parent family's children of the experimental group received the emotional Intelligence development program on the emotional intelligence and the ability of school life adaptation(p>.05). But single parent family's children were higher significant increase than two parent family's children on the relationship with teacher(<.01). The results obtained in this study indicated that the emotional intelligence development program was effective on the emotional intelligence and the ability of school life adaptation. Also, these showed that this program helps the school life adaptation and positive relationship with teacher of single parent family's children.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.8
• /
• pp.1147-1153
• /
• 2000

A total of 9,540 pigs were evaluated for their growth performance to provide information on the development of different feeding strategies to support maximum rate of protein deposition (PD). Large variations in growth performance and protein deposition rate were found in the population used in this study (ADG from 701 to 974 g/day; ADFI from 1,726 to 2,498 g/day; Feed/gain from 2.10 to 2.90; Backfat thickness from 12.4 to 20.5 mm and PD rate from 103 to 153 g/day). It was found that ADG was positively correlated to PD ($R^2=0.9362$, p<0.0001) while FCR was negatively correlated to PD ($R^2=0.4031$, p<0.0001). Backfat thickness was negatively correlated to PD ($R^2=0.7024$, p<0.0001) and to ADG ($R^2=0.5096$, p<0.0001). The estimated lysine requirement based on PD rate also showed large variation (12.37 to 18.38 g/day true ileal digestible lysine on average between 25 and 100 kg), thus strongly indicated the need of separate feeding strategies for each group of pigs. When pigs were divided into three categories according to estimated whole body PD rate, the group of pigs with the highest PD rate grew faster by 6.3 and 13.9% than pigs with intermediate and low PD rate, respectively. Feed utilization was also more efficient in pigs with a high PD rate. It appeared that pigs with high PD rate maintained higher PD rate especially in the later stage of their life. Pigs with high PD rate require an extra amount of 1.2 and 2.4 g/true digestible lysine per day and 0.4 and 0.8% more lysine in the diet than pigs with intermediate and low PD rate during the growing-finishing period respectively. Results of this study suggest that there is a need for separate feeding strategies for individual group of pigs with different PD rate. It should be noted that average value for each group presented in this report is not the adequate amount for an animals potential for maximum PD rate. With recent development in growth modeling and access to computer technologies to facilitate computation, pork producers can easily estimate pigs protein deposition rate and thus can make their own feeding strategies.

• The KIPS Transactions:PartB
• /
• v.10B no.6
• /
• pp.657-664
• /
• 2003

Reliable tracking of moving humans is essential to motion estimation, video surveillance and human-computer interface. This paper presents a new approach to human motion tracking that combines appearance-based and model-based techniques. Monocular color video is processed at both pixel level and object level. At the pixel level, a Gaussian mixture model is used to train and classily individual pixel colors. At the object level, a 3D human body model projected on a 2D image plane is used to fit the image data. Our method does not use inverse kinematics due to the singularity problem. While many others use stochastic sampling for model-based motion tracking, our method is purely dependent on nonlinear programming. We convert the human motion tracking problem into a nonlinear programming problem. A cost function for parameter optimization is used to estimate the degree of the overlapping between the foreground input image silhouette and a projected 3D model body silhouette. The overlapping is computed using computational geometry by converting a set of pixels from the image domain to a polygon in the real projection plane domain. Our method is used to recognize various human motions. Motion tracking results from video sequences are very encouraging.

• Journal of Animal Science and Technology
• /
• v.44 no.6
• /
• pp.685-692
• /
• 2002

This study was carried out to estimate the genetic correlations for the carcass and growth traits of Hanwoo bulls measured at 12 and 18 months of age on the basis of the data form 1,823 heads of Hanwoo bulls raised at the Livestock Improvement Main Center from 1991 to 1998. Genetic correlations were estimated with multiple trait animal model using MTDFREML. The genetic correlations of the body weight at 12 months with average daily gain during 6${\sim}$12 months and with the body length were 0.76 and 0.79, respectively. The genetic correlations of the body weight at 18 months with average daily gain during 6${\sim}$18 months and with the body length were 0.86 and 0.82, respectively. The genetic correlations of the carcass weight with dressing percent, eye muscle area, backfat thickness and carcass length were 0.39, 0.37, 0.44 and 0.63, respectively. And estimate of 0.36 was obtained for the genetic correlation between backfat thickness and marbling score. The high and positive genetic correlations of 0.71 and 0.96 were estimated for the carcass weight with the body weights at 12 and 18 months. The genetic correlations of the carcass weight with body lengths at 12 and 18 months were 0.63 and 0.75, respectively. Positive genetic correlations were estimated for the dressing percentage with the body weight, average daily gain, body length, thurls width and chest girth. Low genetic correlations were estimated between eye muscle area and the growth traits ranging from -0.07 to 0.32. Dressing percentage was low correlated genetically with the growth traits except for the chest girth at 18 months. The genetic correlation between marbling score and chest girth at 18 months estimated was 0.25.