• Title/Summary/Keyword: J region

Search Result 1,885, Processing Time 0.024 seconds

Detection with a SWNT Gas Sensor and Diffusion of SF6 Decomposition Products by Corona Discharges (탄소나노튜브 가스센서의 SF6 분해생성물 검출 및 확산현상에 관한 연구)

  • Lee, J.C.;Jung, S.H.;Baik, S.H.
    • Journal of the Korean Vacuum Society
    • /
    • v.18 no.1
    • /
    • pp.66-72
    • /
    • 2009
  • The detection methods are required to monitor and diagnose the abnormality on the insulation condition inside a gas-insulated switchgear (GIS). Due to a good sensitivity to the products decomposed by partial discharges (PDs) in $SF_6$ gas, the development of a SWNT gas sensor is actively in progress. However, a few numerical studies on the diffusion mechanism of the $SF_6$ decomposition products by PD have been reported. In this study, we modeled $SF_6$ decomposition process in a chamber by calculating temperature, pressure and concentration of the decomposition products by using a commercial CFD program in conjunction with experimental data. It was assumed that the mass production rate and the generation temperature of the decomposition products were $5.04{\times}10^{-10}$ [g/s] and over 773 K respectively. To calculate the concentration equation, the Schmidt number was specified to get the diffusion coefficient functioned by viscosity and density of $SF_6$ gas instead rather than setting it directly. The results showed that the drive potential is governed mainly by the gradient of the decomposition concentration. A lower concentration of the decomposition products was observed as the sensors were placed more away from the discharge region. Also, the concentration increased by increasing the discharge time. By installing multiple sensors the location of PD is expected to be identified by monitoring the response time of the sensors, and the information should be very useful for the diagnosis and maintenance of GIS.

Biogas Production from Agricultural Wastes and Residues in Tropical Region (열대지역(熱帶地域)에서 농산폐유기물(農産廢有機物)을 원료(原料)로한 멘탄가스발생(發生))

  • Joo, Yeong-Hee;Jeon, Yong-Woon;Calilung, Edwin J.;Elepano, Arnold R.
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.18 no.4
    • /
    • pp.325-335
    • /
    • 1985
  • Biogas production from agricultural wastes were summarized as follows: 1. Biogas Generation Characteristics of Various Manures and Residues a. Gas yield from crop residues like rice straw, rice hull, corn stalk and coconut husk can be improved by addition of animal manures. b. Gas yield from coconut husk can be improved through aerobic fermentation for at least one week before loading in the digester. c. Gas yield from fresh rice straw is better than from pre-fermented one, whether alone or in combination with animal manures. d. Initial study has shown that fresh azolla can be substituted for animal manures in manurerice straw combinations and gas yield derived based on unit volatile solids loaded is actually better than for manure-residue combinations. e. Gas production is highly sensitive to substrate pH and becomes almost nil at a pH of below 6. 2. Effect of ambient conditions and other factors on biogas production in a house hold-size digester. a. Results showed that compaction of rice straw in straw-manure combination can reduce gas yield compared with loosely mixed straw. b. The effective gas production period extended to 70 days using freshly threshed rice straw and fresh cattle manure as feed material. c. Underground and above ground digesters with shade have relatively more stable substrate temperature than aboveground exposed digesters. This relative temperature instability may likely be the reason for lower gas yield for the exposed aboveground digester loaded with loose straw-cattle manure substrate, compared with the underground digester with the same substrate. 3. Economic Analysis a. Based on prevailing costs of fuel, materials, and labor in the Philippines, biogas produced from the household size system is cheaper than either LPG or kerosene. b. If other benefits like organic fertilizer, pollution control and convenience are considered, biogas will surely be the best alternative fuel source.

  • PDF

Growth Characteristics and Ingredient Analysis According to the Transplanting Date and Distance of Dendranthema (L.). (감국 정식시기와 거리에 따른 생육특성과 성분 분석)

  • Jung, J.H.;Park, N.B.
    • Journal of Practical Agriculture & Fisheries Research
    • /
    • v.22 no.1
    • /
    • pp.65-77
    • /
    • 2020
  • In order to industrialize of Dendranthema indicum (L.) DesMoul., which is a lot of commercially available and is synonymous with chrysanthemum tea, in the autumn of 2018, Dendranthema indicum (L.) DesMoul. seeds were collected from its own native region, and the seeds were germinated after refrigerated storage. Young seedlings were subjected to experiments in February, March, and April in the open field to examine the effects on the harvesting of leaves by distance and the growth of leaves and stems. The results of analyzing the components by collecting the leaves+stem after collecting the flower of Dendranthema indicum (L.) DesMoul. are as follows. 1. When D. indicum (L.) DesMoul. seedlings were planted according to the transplanting date, the number of flowers was 17.1 in the transplanting date in April. The diameter of the flower was 2.9cm, 16ea, 6.5~6.6g in the fresh weight, and the dry weight of the case was 1.1~1.2g. The leaves were 46~47ea in March and April in the planted area, 5.2~5.3cm in leaf length and 3.5~3.6cm in leaf width. 2. When planted D. indicum (L.) DesMoul. seedlings according to transplanting distance, the number of flowers was 16.2 when planted at 20×20cm intervals and, 16.8~17.1 at 30×30~50×50cm intervals. The diameter of the flower was 2.7~2.8cm, the number of petals was 8, the length of the petal was 0.8 cm, and fresh weight was 6.5~6.6g per flower. Leaves had the largest number of 47 of 30×30cm and 40×40cm, and leaf length appeared at the longest 6.2cm in the 50×50cm treatment area, but 5.2cm in the other treatment areas. 3. The extraction yield of D. indicum (L.) DesMoul. leaves+stems was 7.93%, and the extraction solvent colors were light green at 50, 60% and green at 70, 80, 90, 100%. The extraction yield of D. indicum (L.) DesMoul. flowers was 7.58%, the color of the extraction solvent was light yellow at 50, 60 and 70%, yellow at 80 and 90%, and dark yellow at 100%. 4. We confirmed 11 kinds of ingredients such as in D. indicum (L.) DesMoul. flowers are gallic acid, 4-hydroxy benzoic acid, methyl gallate, 4-hydroxy-3-methoxy benzoic, caffeic acid, salicylic acid, p-coumaric acid, sinapic acid, naringin, 4-melthoxyben, flavone. The content was 29.200-36.900ppm. 5. The components contained in the D. indicum (L.) DesMoul. leaf+stem, salicylic acid appeared at 6,129.526ppm, and the next 4-methoxyben was 1,966.714ppm. It was methyl gallate 8.197ppm, 4-hydroxy-3-methoxy benzoic 6.994ppm, caffeic acid 5.566ppm, flavone 4.522ppm, p-coumaric acid 3.787ppm, gallic acid 1.893ppm that appeared in the content below 10ppm.

Studies on the Ecological Characteristics for the Plant Types in Peanut (Arachis hypogaea L.) I. Differences of Flowering Habit for the Botanical Types (땅콩의 초형별 생태적 특성에 관한 연구 -제 1 보 초형별 개화습성의 차이-)

  • Lee, J.I.;Park, Y.H.;Park, Y.K.
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.29 no.2
    • /
    • pp.191-197
    • /
    • 1984
  • This study was conducted to investigate the flowering habit for the botanical types of peanut (Arachis hypogaea. L) in cultural limiting region. Eight peanut varieties pertaining to virginia, Spanish, Valencia, Shinpung type were used in this study. Shinpung type, a new erect type was developed at Crop Experiment Station, ORD. Appearance of the first flower of peanut plants is observed at a relatively early growing stage. Number of days to first flower were 41 days under vinyl-mulching while non-mulching culture took 55 days. Number of days to first flower were delayed in order of Valencia, Spanish, Shinpung, Virginia type. Flowering durations were distinguished among botanical types and days of those were Virginia 85-93, Spanish 101-105, Valencia 106-113, Shinpung 82-88 days, respectively. The Spanish and Valencia types produced more flowers than Virginia and Shinpung types. The maximum flowering stage of Shinpung and Virginia types reached early and ceased by one cycle, while Spanish and Valencia types came late and showed maximum stage through the early and late stage during the growth stage. By vinyl-mulching, the maximum flowering stage was shortened by 20 days than that of non-mulching. Distribution of flowers for each of branch positions to total flowers occupied 52-53% in two cotyledonary branchs, 23-27% in 3rd to 5th branchs, 20-25% in over. 6th branchs. Shinpung type was considered more favorable botanical type than the other types for the breeding of early maturing high yielding variety because of shortening of days to first flower, flowering duration and distribution of lower branch of effective flowers.

  • PDF

Intratypic Variants of HPV-16 E6jE7 Oncogene Isolated from Sexually High-Risk Women in Busan. (부산지역 유흥업소 종사여성으로부터 분리된 HPV16형의 발암유전자(E6/E7) 돌연변이 유형 분석)

  • Min, Sang-Kee;Kim, Sung-Soon;Choi, Byeong-Sun;Jang, Dai-Ho;Lee, Mee-Ok;Choi, Seung-Hwa;Kim, Nam-Ho;Park, Yon-Koung;Jeong, Yeong-A;Kim, Seong-Joon;Bin, Jae-Hun;Park, Ho-Kuk
    • Journal of Life Science
    • /
    • v.19 no.6
    • /
    • pp.765-769
    • /
    • 2009
  • Recent studies have reported that the distribution of HPV-16 sequence variation differs geographically, and more specifically that HPV-16 E6/E7 intratypic variants might carry a high risk for development of ICC (invasive cervical cancer) and CIN (cervical intraepithelial neoplasia) in a given population. To investigate the genetic diversities of HPV-16 E6/E7 oncogene by region, we collected nineteen HPV-16 isolates from sexually high-risk women in Busan, and analyzed the HPV-16 E6/E7 coding regions (nt 34 to 880) with HPV-16 E6/E7 specific PCR amplification. At the nucleotide levet eleven variants of the E6 genes and nine variants of the E7 genes were identified as follows: E6 T178G (n=l1), E6 T178A (n=l), E6 T350G (n=3), E6 A442C (n=2), E6 AI04T, E6 All1G, E6 C116T, E6 G145T, E6 T183G, E6 C335T, E6 G522C and E7 A647G (n=12), E7 A645C, E7 A777C, E7 G663A, E7 T732C, E7 T760C, E7 A775T, E7 T789C and E7 T795G, respectively. At the amino acid levet the isolated HPV-16 E6 and E7 genes showed eleven E6 variants: E6 D25E (n=12), E6 L83V (n=4), E6 E113D (n=2), E6 MIL, E6 Q3R, E6 P5S, E6 Q14H, E6 D25N, E6 127R, E6 H78Y, E6 C140S and three E7 variants: N29S (n=12), L28F, T72S. HPV16 E6 L83V, the dominant variant in the Caucasian population, showed relatively low frequencies in our study population. We elucidated that the dominant HPV-16 E6/E7 variants were HPV-16 E6 D25E (63.2%) and HPV-16 E7 N29S (63.2%), which were phylogenetically included in Asian lineage. Further study is needed to evaluate the risk of cervical cancer related HPV-16 E6/E7 intratypic variants in the Korean population.