• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4514-4521
• /
• 2022

In this study, the effects of heat and radiation on the degradation behaviour of fluoroelastomer under simulated normal operation and a severe accident environment were investigated using sequential testing of gamma irradiation and thermal degradation. Tensile properties and Shore A hardness were measured, and thermogravimetric analysis was used to evaluate the degradation behaviour of fluoroelastomer. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy were used to characterize the structural changes of the fluoroelastomer. Heat and radiation generated in nuclear power plant break and deform the chemical bonds, and fluoroelastomer exposed to these environments have decreased C-H and functional groups that contain oxygen and double bonds such as C-O, C=O and C=C were generated. These functional groups were formed by auto oxidation by reacting free radicals generated from the cleaved bond with oxygen in the atmosphere. In this auto oxidation reaction, crosslinks were generated where bonded to each other, and the mobility of molecules was decreased, and as a result, the fluoroelastomer was hardened. This hardening behaviour occurred more significantly in the severe accident environment than in the normal operation condition, and it was found that thermal stability decreased with the generation of unstable structures by crosslinking.

• Nuclear Engineering and Technology
• /
• 제49권7호
• /
• pp.1472-1482
• /
• 2017

Zirconium alloy cladding tube specimens were irradiated at $380^{\circ}C$ up to a fast neutron fluence of $7.5{\times}10^{24}n/m^2$ in a research reactor to investigate the effect of neutron irradiation on hydride reorientation and mechanical property degradation. Cool-down tests from $400^{\circ}C$ to $200^{\circ}C$ under 150 MPa tensile hoop stress were performed. These tests indicate that the irradiated specimens generated a smaller radial hydride fraction than did the unirradiated specimens and that higher hydrogen content generated a smaller radial hydride fraction. The irradiated specimens of 500 ppm-H showed smaller ultimate tensile strength and plastic strain than those characteristics of the 250 ppm-H specimens. This mechanical property degradation caused by neutron irradiation can be explained by tensile hoop stress-induced microcrack formation on the hydrides in the irradiation-damaged matrix and subsequent microcrack propagation along the hydrides and/or through the matrix.

• Transactions on Electrical and Electronic Materials
• /
• 제1권1호
• /
• pp.12-16
• /
• 2000

In this paper, we analyze self field effects of Bi-2223 tape-stacked cable assuming constant current density in the cross section of stacked cable. Generally, the critical current of Bi-2223 tape-stacked-cable in much less than the total summation of critical currents of each tape, which is mainly due to the self magnetic fields of the cable itself. Therefore, to predict the critical current of Bi-2223 tape-stacked-cable, we needs to analyze the self filed effects on the stacked cable as well as critical current density data(J$\_$C/) of one tape. To make it more complex, the critical current degradation of Bi-2223 tape is an-isotropic; the critical current is lower in the normal magnetic field(to the tape surface) than in the parallel field. In the paper, a novel approach to predict the critical current of a Bi-2223 tape-stacked-cable from a J$\_$C/-B curve of one tape is presented with the assumption of constant current density across the stacked cable, The approach basically includes the load analysis of the stacked tapes, and its usefulness is confirmed by the experimental data.

• 한국전기전자재료학회논문지
• /
• 제18권3호
• /
• pp.226-230
• /
• 2005

This paper describes the photocatalytic degradation properties by oxygen partial pressure for TiO$_2$ thin films fabricated by dc magnetron reactive sputtering. And the structural, chemical, optical and photocatalytic properties were investigated at various analysis system. When TiO$_2$ thin film was made at deposition time of 120 min and Ar:O$_2$ ratio of 60:40, the best properties were obtained. That results were as follows: thickness; 360∼370 nm, gram size; 40 nm, optical energy band gap; 3.4 eV and Benzene conversion in the photocatalytic degradation; 11 %.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.157-160
• /
• 2001

Three sets of ZnO ceramic devices (reference samples with Matsuoka\`s composition; added 7o MgO, A1$_2$O$_3$, SiO$_2$) have been prepared by the conventional mixed oxide route. These additives were determined by the factors of valences and ionic radiuses. DC accelerated degradation test was performed for analysis of degradation characteristics versus the various additives. The conditions of DC degradation test were 115${\pm}$2$^{\circ}C$ for 12h. Using XRD and SEM, the Phase and microstructure of samples were analyzed respectively. E-J analysis was used to determine ${\alpha}$. Frequency analysis was accomplished to understand the relationship between R$\sub$g/ and $R_{b}$ with the electric stress at the equivalent circuit.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권1호
• /
• pp.35-42
• /
• 1998

Whole faba beans (WFB) were dry roasted at different temperatures (110, 130, $150^{\circ}C$) for 15, 30, 45 minutes to determine the optimal heating conditions of time and temperature to increase nutritional value. Ruminant degradation characteristics of crude protein (CP) of WFB were determined by the nylon bag incubation technique in dairy cows fed 60% hay and 40% concentrate. Measured characteristics of crude protein (CP) were soluble (washable) fraction (S), undegradable fraction (U), lag time (T0), potentially degradable fraction (D) and the rate of degradation (Kd) of insoluble but degradable fraction. Based on measured characteristics, percentage bypass crude protein (%BCP) and bypass crude protein (BCP in g/kg) were calculated. Degradability of CP was reduced by dry roasting (p < 0.01). S was reduced rapidly with increasing time and temperature, from 49.0% in the raw WFB (RWFB) to 26.3% in $150^{\circ}C/45$ min. D varied from 50.7% in RWFB to 73.7% in $150^{\circ}C/45^{\prime}$. U varied from 0% in $130^{\circ}C/45^{\prime}$, $150^{\circ}/30^{\prime}$ and $150^{\circ}/45^{\prime}$ to 0.66% in $110^{\circ}/45^{\prime}$ (0.24% for the RWFB). Lag time (T0) varied from 1.58 h in $130^{\circ}C/30^{\prime}$ to 2.40 h in $150^{\circ}C/45^{\prime}$ (1.87 h for RWFB). Kd varied from 24.2% in the $110^{\circ}C/30^{\prime}$ to 4.3% in $150^{\circ}C/45^{\prime}$ (21.4% for the RWFB). Kd was significantly reduced with time and temperature. All these effects resulted in increasing % BCP from 8.9% in the $110^{\circ}C/45^{\prime}$, 11.3% in the RWFB to 43.1% in the $150^{\circ}C/45$. Therefore BCP increased from 31.3 and 39.9 to 148.4 g/kg respectively. Both %BCP and BCP at $150^{\circ}C/45$ increased nearly 4 times over the raw faba beans. The effects of dry roasting temperature and time on %BCP and BCP seemed to be linear up to the highest values tested. Therefore no optimal dry roasting conditions of time and temperature could be determined at this stage. It was concluded that dry roasting was effective in shifting crude protein degradation from rumen to intestine to reduce unnecessary nitrogen (N) loss in the rumen. To determine the optimal treatment, the digestibility of each treatment should be measured in the next trial using mobile bags technique.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1627-1629
• /
• 1999

In order to analysis the degradation process of epoxy/glass fiber for outdoor condition, FRP laminate was exposed to high temperature and water. Then the degradation process was evaluated by comparing contact angle, surface potential decay, and surface resistivity. For the change of wettability, the contact angle of thermal-treated specimen with the high temperature of $200^{\circ}C$ increased. But that of water-treated specimen decreased. The characteristic of surface potential decay shows the tendency of the remarkable decrease on water-treated specimens, but no difference on thermal-treated specimen compared with untreated one. Also, for the surface resistivity, it shows the same trend compared with the change of contact angle.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권4호
• /
• pp.501-506
• /
• 2001

This experiment was conducted to evaluate the effects of supplemental unsaturated fatty acids (UFA) on fermentation characteristics, especially on gas production, cellulose degradation and volatile fatty acid (VFA) concentration by mixed ruminal microorganisms. In order to attain this objective, unsaturated fatty acids including oleic acid (C 18:1), linoleic acid (C18:2) and arachidonic acid (C22:4) were added at varying level. Mixed ruminal microbes used in this experiment were obtained from the rumen of a cannulated Holstein cow. Medium pH values after 7 d incubation were significantly affected by type and level of unsaturated fatty acids (p<0.01). All of UFA inhibited total gas production, and especially treatment of arachidonic acid at the levels of 0.01% gave the lowest gas. production after 7 d incubation (p<0.01). Comparison of the population of protozoa revealed that UFA did not have any significant effect on the total protozoa number. The addition of UFA did not effect dry matter degradation. Volatile fatty acid (VFA) composition of the culture was influenced little by UFA, although the considerable amount of iso-type VFA were detected in UFA supplemented incubations. The ratio of acetic acids to propionic acids, however, was lower than control in all the treatments after 7 d incubation (p<0.01).

• 한국수소및신에너지학회논문집
• /
• 제24권5호
• /
• pp.421-427
• /
• 2013

We report on the time dependent degradation of cell in dye-sensitized solar cells (DSSC). The photovoltaic performance of DSSC over a period of time was investigated in liquid electrolyte based on triiodide/iodide during six days. It was found that the short circuit current density ($j_{sc}$) of the cell dropped from 9.9 to $7mA/cm^2$ while efficiency (${\eta}$) of the cell decreased from 4.4 to 3.3%. The parameters corresponding to fundamental electronic and ionic processes in a working DSSC are determined from the electrochemical impedance spectrascopy (EIS) at open-circuit potential ($V_{oc}$). EIS study of the DSSC in the this work showed that the electron life time ${\tau}_r$ and chemical capacitance $C_{\mu}$ decreased significantly after six days. It was correlated the $j_{sc}$ and efficiency decreased after six days.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.25-28
• /
• 2001

The objectives of this paper are to demonstrate the electrical degradation phenomena with Si atom's behaviors in the grainboundary of semiconducting ZnO ceramics. The ZnO ceramic devices used in this investigation were fabricated by standard ceramic techniques. Especially, $SiO_2$ were added to analyze the degradation characteristics with Si and sintered in oxygen ambient at $1300^{\circ}C$. The conditions of DC degradation test were $115{\pm}2^{\circ}C$ for 13h. Using XRD and SEM, the phase and microstructure of samples were analyzed respectively. E-J analysis was used to determine $\alpha$. Frequency analysis was accomplished to understand $R_g$ and $R_b$ at the equivalent circuit. Electrical stability improved as the amount of $SiO_2$ addition increased. This results were explain by the quantitative analysis and the line scanning method of EPMA.