• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 춘계학술대회
• /
• pp.302-304
• /
• 2018

일방적인 시청각위주의 교육보다는 효과적으로 학습이 가능한 교육에 대한 필요성이 제기되고 있다. 다양한 시나리오의 상황설계와 반복적 교육이 가능한 기능성게임은 콘텐츠 활용 및 확산에 용이하다. 인지발달이 가장 활발한 시기인 아동기, 청소년기의 안전교육의 효과는 타 연령대에 비하여 가장 효과가 높다. 이에 기능성게임을 이용한 청소년 안전교육콘텐츠 제작 가이드라인과 구성요소를 제시하고자한다.

• 한국지능시스템학회논문지
• /
• 제14권2호
• /
• pp.216-221
• /
• 2004

This paper describes an optimal synthesis method of binary neural network for pattern recognition. Our objective is to minimize the number of connections and the number of neurons in hidden layer by using a Newly Expanded and Truncated Learning Algorithm (NETLA) for the multilayered neural networks. The synthesis method in NETLA uses the Expanded Sum of Product (ESP) of the boolean expressions and is based on the multilayer perceptron. It has an ability to optimize a given binary neural network in the binary space without any iterative learning as the conventional Error Back Propagation (EBP) algorithm. Furthermore, NETLA can reduce the number of the required neurons in hidden layer and the number of connections. Therefore, this learning algorithm can speed up training for the pattern recognition problems. The superiority of NETLA to other learning algorithms is demonstrated by an practical application to the approximation problem of a circular region.

• Journal of electromagnetic engineering and science
• /
• 제6권4호
• /
• pp.203-208
• /
• 2006

Channel estimation and data detection for OFDM systems over time- and frequency-selective channels are investigated. Relying on the complex exponential basis expansion channel model, a pilot-embedded channel estimation scheme with low computational complexity and spectral efficiency is proposed. A periodic pilot sequence is superimposed at a low power on information bearing sequence at the transmitter before modulation and transmission. The channel state information(CSI) can be estimated using the first-order statistics of the received data. In order to enhance the performance of channel estimation, we recover the transmitted data which can be exploited to estimate CSI iteratively. Simulation results show that the proposed method is suitable for doubly-selective channel estimation for the OFDM systems and the performance of the proposed method can be better than that of the Wiener filter method under some conditions. Through simulations, we also analyze the factors which can affect the system performances.

• 융합신호처리학회논문지
• /
• 제15권2호
• /
• pp.37-41
• /
• 2014

The vector Taylor series (VTS) based method usually employs clean speech Hidden Markov Models (HMMs) when compensating speech feature vectors or adapting the parameters of trained HMMs. It is well-known that noisy speech HMMs trained by the Multi-condition TRaining (MTR) and the Multi-Model-based Speech Recognition framework (MMSR) method perform better than the clean speech HMM in noisy speech recognition. In this paper, we propose a method to use the noise-adapted HMMs in the VTS-based speech feature compensation method. We derived a novel mathematical relation between the train and the test noisy speech feature vector in the log-spectrum domain and the VTS is used to estimate the statistics of the test noisy speech. An iterative EM algorithm is used to estimate train noisy speech from the test noisy speech along with noise parameters. The proposed method was applied to the noise-adapted HMMs trained by the MTR and MMSR and could reduce the relative word error rate significantly in the noisy speech recognition experiments on the Aurora 2 database.

• 소성∙가공
• /
• 제30권4호
• /
• pp.186-194
• /
• 2021

Finite element simulation is a widely applied method for practical purpose in various metal forming process. However, in the simulation of elasto-plastic behavior of porous material or in crystal plasticity coupled multi-scale simulation, it requires much calculation time, which is a limitation in its application in practical situations. A machine learning model that directly outputs the constitutive equation without iterative calculations would greatly reduce the calculation time of the simulation. In this study, we examined the possibility of artificial intelligence based constitutive equation with the input of existing state variables and current velocity filed. To introduce the methodology, we described the process of obtaining the training data, machine learning process and the coupling of machine learning model with commercial software DEFROM^TM, as a preliminary study, via rigid plastic finite element simulation.

• East Asian Economic Review
• /
• 제25권4호
• /
• pp.403-424
• /
• 2021

AdaBoost tweaks the sample weight for each training set used in the iterative process, however, it is demonstrated that it provides more correlated errors as the boosting iteration proceeds if models' accuracy is high enough. Therefore, in this study, we propose a novel way to improve the performance of the existing AdaBoost algorithm by employing heterogeneous models and a stochastic twist. By employing the heterogeneous ensemble, it ensures different models that have a different initial assumption about the data are used to improve on diversity. Also, by using a stochastic algorithm with a decaying convergence rate, the model is designed to balance out the trade-off between model prediction performance and model convergence. The result showed that the stochastic algorithm with decaying convergence rate's did have a improving effect and outperformed other existing boosting techniques.

• International Journal of Internet, Broadcasting and Communication
• /
• 제16권2호
• /
• pp.127-135
• /
• 2024

Recent studies have shown that inverse design using deep learning has the potential to rapidly generate the optimal design that satisfies the target performance without the need for iterative optimization processes. Unlike traditional methods, deep learning allows the network to rapidly generate a large number of solution candidates for the same objective after a single training, and enables the generation of diverse designs tailored to the objectives of inverse design. These inverse design techniques are expected to significantly enhance the efficiency and innovation of design processes in various fields such as aerospace, biology, medical, and engineering. We analyzes inverse design models that are mainly utilized in the nano and chemical fields, and proposes inverse design models based on supervised and unsupervised learning that can be applied to the engineering system. It is expected to present the possibility of effectively applying inverse design methodologies to the design optimization problem in the field of engineering according to each specific objective.

• Structural Engineering and Mechanics
• /
• 제56권4호
• /
• pp.549-567
• /
• 2015

A first-order moment method (FORM) reliability analysis is commonly used for structural stability analysis. It requires the values and partial derivatives of the performance to function with respect to the random variables for the design. These calculations can be cumbersome when the performance functions are implicit. A Gaussian process (GP)-based response surface is adopted in this study to approximate the limit state function. By using a trained GP model, a large number of values and partial derivatives of the performance functions can be obtained for conventional reliability analysis with a FORM, thereby reducing the number of stability analysis calculations. This dynamic renewed knowledge source can provide great assistance in improving the predictive capacity of GP during the iterative process, particularly from the view of machine learning. An iterative algorithm is therefore proposed to improve the precision of GP approximation around the design point by constantly adding new design points to the initial training set. Examples are provided to illustrate the GP-based response surface for both structural and non-structural reliability analyses. The results show that the proposed approach is applicable to structural reliability analyses that involve implicit performance functions and structural response evaluations that entail time-consuming finite element analyses.

• 한국통신학회논문지
• /
• 제25권1A호
• /
• pp.167-177
• /
• 2000

본 논문에서는 DMT(discrete multitone)방식의 $\chi$DSL(digital subscriber line)시스템에 사용되는 시간영역 등화기 설계를 위한 새로운 알고리듬을 제안한다. 제안된 알고리듬은 DMT 시스템의 등화기 설계기 사용되는 ARMA(autoregressive moving average) 모델에서 DMT시스템의 성능에 영향을 주지 않는 항을 삭제 시킴으로써 최소의 계산량을 갖는다. 제안된 방식은 matrix inverse 방식, fast algorithm방식, iterative 방식, inverse power 방식과 같은 기존의 시간영역 등화 알고리듬들과 비교할 때 매우 적은 계산량을 사용하나, 성능면에서는 기존의 방식과 비슷하거나 우수한 결과를 보인다. 또한 제안된 방식에서는 수신된 신호만 사용하므로 채널의 임펄스 응답을 추정하거나 훈련신호를 사용할 필요가 없다는 장점이 있다. 또한 bridged tap 유무에 대한 정보를 이용하였다. 즉, bridged tap이 포함되지 않는 채널의 경우 시간영역 등화기 계수의 개수를 반으로 줄일 수 있음을 보인다. ADSL(asymmertrical digital subscriber line)서비스 환경에서 제안된 시간영역 등화기 알고리듬과 기존 시간영역 등화기 알고리듬의 성능을 비교한다.

• 대한원격탐사학회지
• /
• 제33권5_2호
• /
• pp.689-698
• /
• 2017

이 논문에서는 비접근 지역의 작물 분류를 목적으로 준감독 학습에 인접 화소의 공간 유사성 정보를 결합하는 분류 방법론을 제안하였다. 적은 수의 훈련 자료를 이용한 초기 분류 결과로부터 신뢰성 높은 훈련 자료의 추출을 위해 준감독 학습 기반의 반복 분류를 적용하였으며, 새롭게 훈련 자료 추출시 인접한 화소의 분류 항목을 고려함으로써 불확실성이 낮은 훈련 자료를 추출하고자 하였다. 북한 대홍단에서 수집된 다중시기 Landsat-8 OLI 영상을 이용한 밭작물 구분의 사례 연구를 통해 제안된 분류 방법론의 적용 가능성을 검토하였다. 사례 연구 결과, 초기 분류 결과에서 나타난 작물과 산림의 오분류와 고립된 화소가 제안 분류 방법론에서 완화되었다. 또한 인접 화소의 분류 결과를 고려한 훈련 자료 추출을 통해 이러한 오분류 완화 효과가 더욱 두드러지게 나타났으며, 초기 분류 결과와 기존 준감독 학습에 비해 고립된 화소도 감소되었다. 따라서 비접근 지역으로 인해 훈련 자료의 확보가 어려울 경우 이 연구에서 제안된 방법론이 작물 분류에 유용하게 적용될 수 있을 것으로 기대된다.