• 제목/요약/키워드: Item Level

검색결과 1,286건 처리시간 0.028초

Item Level RFID 수요분석을 통한 활성화전략 (Promotion Strategy of Item Level RFID by Demand Analysis)

  • 박용재;임명환
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2009년도 춘계학술대회
    • /
    • pp.837-840
    • /
    • 2009
  • 최근, 박스 및 팔레트 단위가 아닌 개별 단위 물품에 바코드 대신 RFID를 부착하는 Item Level RFID 시장이 향후 국내외적으로 확대될 조짐이다. 이에 본 연구에서는 개별 단위 물품에 RFID를 적용하는 Item Level RFID 서비스 수요를 분석함으로써 RFID 산업의 활성화를 촉진하고, 발전시킬 수 있는 전략들을 도출해 보고자 한다. 본 연구는 다음과 같은 내용으로 구성되어 있다. 첫째, Item Level RFID 국내외 시장동향을 분석하였다. 둘째, RFID 수요 기업들을 대상으로 설문조사를 실시하고 Item Level RFID 유망 서비스 분야, 시장선도 예상분야, 보급시기 선도분야, 도입시 장애요인을 분석하였다. 마지막으로 실증분석 결과를 바탕으로 Item Level RFID를 활성화할 수 있는 전략들을 제시하였다.

  • PDF

대용특성을 이용한 예방정비모형 : 주기적으로 관측하는 경우 (Preventive Replacement Model Based on Substitutive Characteristics : the case of periodic observation)

  • 구자항;장중순;김원중
    • 품질경영학회지
    • /
    • 제20권2호
    • /
    • pp.33-43
    • /
    • 1992
  • Items are assumed to fail by degradation. An appropriate stochastic model of such item is a cumulative process in which an item can fail only when the total amount of wear exceeds a prespecified failure level. This paper presents replacement policy in which an item is replaced at a certain level of wear before failure or at failure, whichever occurs first. Yet, when measuring the item wear level is very expensive, destructive or time-consuming, it may be economical to use substitutive characteristics that are correlated with the item wear level and relatively inexpensive to measure. The item's wear level could usually be estimated by monitoring such substitutive characteristics only except for a breakdown, which may be observed immediately at its occurrence. The purpose of this paper is to find an optimal periodic replacement policy based on such substitutive characteristics that balance the cost of replacement with the cost of failure and result in a minimum total long-run average cost per unit time. The optimal level of substitutive characteristics to replace the item is obtained. Numerical example illustrate how the model can be used to determine the optimal replacement policy.

  • PDF

대용특성을 이용한 예방정비모형 (Preventive Replacement Models Based on Substitutive Characteristics)

  • 구자항;김원중;장중순
    • 품질경영학회지
    • /
    • 제20권1호
    • /
    • pp.59-67
    • /
    • 1992
  • This paper deals with preventive replacements models for the item whose failures are dependent on their wear level. When measuring the item wear level is very costly, it may be economical to use substitutive characteristics that are correlated with the item wear level and relatively inexpensive to measure. In this paper, replacement policies based on such substitutive characteristics are proposed. The optimal level of substitutive characteristic to replace the item, which minimizes total cost, is obtained. Some numerical examples are also given.

  • PDF

Analysis of Multi-Level Inventory Distribution System for an Item with Low Level of Demand

  • Lee, Jin-Seok;Yoon, Seung-Chul
    • 산업경영시스템학회지
    • /
    • 제23권60호
    • /
    • pp.11-22
    • /
    • 2000
  • The main objective of this research is to analyze an order point and an order quantity of a distribution center and each branch to attain a target service level in multi-level inventory distribution system. In case of product item, we use the item with low volume of average monthly demand. Under the continuous review method, the distribution center places a particular order quantity to an outside supplier whenever the level of inventory reaches an order point, and receives the order quantity after elapsing a certain lead time. Also, each branch places an order quantity to the distribution center whenever the level of inventory reaches an order point, and receives the quantity after elapsing a particular lead time. When an out of stock condition occurs, we assume that the item is backordered. For considering more realistic situations, we use generic type of probability distribution of lead times. In the variable lead time model, the actually achieved service level is estimated as the expected service level. Therefore, this study focuses on the analysis of deciding the optimal order point and order quantity to achieve a target service level at each depot as a expected service level, while the system-wide inventory level is minimized. In addition, we analyze the order level as a maximum level of inventory to suggest more efficient way to develop the low demand item model.

  • PDF

국가영어능력평가시험(NEAT)의 검사지 구성의 원칙과 절차: 문항 유형 확정 모델 (A blueprint for designing and developing the listening and the reading test of National English Ability Test (NEAT): Item-types decision-making model)

  • 김용명
    • 영어어문교육
    • /
    • 제16권4호
    • /
    • pp.153-184
    • /
    • 2010
  • On the bases of the 5 principles and the 4 criteria for designing and developing of the listening and the reading test of National English Ability Test (NEAT), this study presents Item-Types Decision-Making Model as a blueprint for designing and constructing the two tests. It sets up the criteria for validating item types, designs a modular type of test specifications, constructs an item-types bank, and specifies a complementary type of test specifications of the two tests. To gather all these threads up, it constructs Item-Types Decision-Making Model which consists of such components as the item-type pool, the validity criteria and the procedures of testing item types, the item-types bank, the modular and the complementary type test specification. Thus, it shows how the Model works in developing and constructing the two level-differentiated listening and reading tests (the 2nd and the 3rd rank) of NEAT. Finally, it discusses some implications and applications of the Model to the two level-differentiated tests (the A and the B type) of 2014 CSAT (College Scholastic Ability Test) systems, National Assessment of Educational Achievement (NAEA), and classroom testing. In conclusion, Item-Types Decision-Making Model functions as a testing template in an item development system and as a matrix in an item-types bank system.

  • PDF

공학계열 대학생 물리 기초학력평가 문항분석 및 성취수준 설정 사례연구 (A Case Study on Item Analysis and Standard Setting of the Physics Basic Ability Test for Engineering College Students)

  • 이금호;정혜경
    • 공학교육연구
    • /
    • 제26권6호
    • /
    • pp.40-50
    • /
    • 2023
  • This study is to examine the validity of assessing basic-level proficiency in physics among incoming engineering freshmen through item analysis and standard setting. For empirical analysis, we examined the physics subject taken by the freshman class of 2021 at K University, considering its significance for engineering students. In this study, we initially performed item analysis utilizing both classical test theory and item response theory. Subsequently, leveraging the item and test information, we employed a modified Angoff method and the Bookmark method for standard setting. Consequently, the difficulty level initially set during item development was found to be higher than the actual performance level exhibited by the students. This study highlights a discernible disparity between the expected university standard and the real proficiency level of incoming freshmen in terms of basic academic ability in physics. Based on these research findings, a comprehensive discussion on the fundamental academic competence of engineering students was conducted, underscoring the necessity for formulating a tailored learning approach leveraging the outcomes from the basic ability test.

부산지역(釜山地域) 개업치과(開業齒科)의 치과보철물(齒科補綴物)에 관(關)한 만족도(滿足度) 조사(調査)(I) - 일부정식 치과 보철물에 관하여 - (A Study on Satisfaction of Practicing Dentists about Prosthesis in Pusan Part I : About Fixed Prosthetic appliances)

  • 이명곤
    • 대한치과기공학회지
    • /
    • 제10권1호
    • /
    • pp.159-169
    • /
    • 1988
  • Fixed prosthetic appliance is the restorations of damaged teeth with cast metal or porcelain, and of replacing missing teeth with fixed, or cemented prosthesis. Successfully treating a patient by means of fixed prosthodontics requires the thoughtful combination of dentist and dental laboratory technician. In order to know the satisfaction of dentisits about fixed prosthetic appliances-porcelain, precious and non precious metal-, this study was conducted for 69 practicing dentisis in Pusan during Fed. to Mar. 1988 using a questionnaire method and was analyzed by the use of percentage, $X^2$-test The results are obtained as follow: 1. General characteristics of the respondents, The rate of age distribution of practcing dentists responded was as follow : 31$\sim$35 age group is 29.0%, 51$\sim$55age group 18.8%, 41$\sim$45 age group and 46$\sim$50 group each 11.6%, 36$\sim$40 age group and 56$\sim$60 age group 8.7%, over 60 age group 7.3%, below 30 age group 4.3% respectively. The tate of term of practice experience distribution of dentists responded was as follow : 6$\sim$10 year group 26.1%, 25$\sim$25year group 18.8%, 11$\sim$15 years group and 16~20 years group each 13.0%, below 5 years group and over 30 years group each 10.2%, 26$\sim$30 years group 8.7% in order. The rate of respondents’ degree was follow : bachelor group 81.2%, doctor group 13.0%, master group 5.8% in order. The rate of respondents’completed medical specialist course was as follow : non-complete group 75.4%, complete group 24.6%. The rate of having own laboratory in respondents’clinic was as follow : no having own laboratory group 58.0%, having own labiratory group 42.0% The rate of being lab. technician in respondent;s clinic was as follow: non-being lab. technician group 91.3%, being lab. technician group 8.7%. The rate of transactional commercial dental lab. numbers was as follow : I dental lab. group 40.6%, 2 dental lab. group 30.4%, 3 dental lab. group 20.3%, production at own lab. group 8.7% 2. Cognitions about the respondent's job, About cognition of patient numvers, there were neither many nor few group 62.3%, few group 17.4%, many group 15.9%, too many group 4.4% in order.(P<.01) As compared with the ratio of dentists to patient prothetic treatment, there were moderate level group 46.4%, high level group 33.6%, low level group 18.8% in order.(P<.01) By job satisfaction of respondents, the highest percentage group was satisfied group 44.9%, neither astisfied nor disstified group 33.3%, dissatisfied group 14.5%, much satisfied group 7.3%(P<.01). As compared with the level of prosthetics price, the were moderate level group 71.0%, low level group 23.2%, high level group 5.8%(P<.01) 3. Satisfaction and assessment of dissatisfied factor of the fixed prosthetic appliance, As compared with the satisfaction of al prosthetic appliance, there were neither satisfied nor dissatisfied group 59.4%, satisfied group 20.3% dissatisfied group 18.8%, much satisfied group 1.5% in order.(P<.01). About precious and non precious metal crown and bridge, there were neither satisfied nor dissatisfied group 60.9%, satisfied group 24.6%, dissatisfied group 11.6%, much satisfied group 2.9% in order.(P<.01) The reat of respondent;s satisfaction about porcelain crown and bridge was as follow : neither satisfied nor dissatisfied group 43.5%, dissatisfied group 33.3%, satisfied group 21.7%, much satisfied group 1.5%(P<.01). The rate of respondent's dissatisfied factor item of precious and non precious metal crown and bridge was as follow : inadequate margin fit item 39.1% respondent, inadequate occlusion item 24.6%, inadequate adaptation item 23.2%, poor anat omic form item 15.9%, inadequate contact item 31.9%, improper polishing item 4.4%, the rest item 11.6% respectively. The rate of respondent's dissatisfied factor item of porcelain crown and bridge was as follow : inadequate margin fit item 52.2%, inadequate occlusion item 2.9%, inadequate adaptation item 10.1%, poor anatomic form item 11.6%, improper polishing item 1.5%, shade mismatching item 71%, the rest item 7.2% respectively. The rate of cognition of respondents’ about cause of dissatisfied factor on fixed prosthetic appliance by item was as follow : deficiency of sincerity item 55.1%, deficiency of knowledge about work item 47.8%, deficiency of experience item 15.9%, poor quality of using material item 5.8%, the rest item 2.9% respectively.

  • PDF

초등학교 5학년 학생들의 분수 연산능력 평가 문항에 대한 분석 (An Analysis of Assessment Item on the Fraction Computation Ability for Fifth Grade Student)

  • 이강섭;김규상
    • 한국수학교육학회지시리즈C:초등수학교육
    • /
    • 제8권2호
    • /
    • pp.61-68
    • /
    • 2004
  • The purpose of this study is to develope and analyze the assessment items which can be used in evaluation of the fraction computation ability for fifth grade students. The item development team consists of three elementary school teachers and three mathematics education expert. The developed items was analyzed item analysis after applying to 135 fifth grade students. As a results of item analysis, it shows meaningful over the level of a standard basis: reliability: 0.80; validity: item 1(1.05), item 2(1.10), item 3(.85), item 4(.90), item 5(1.08); item difficulty: item 1(-.22), item 2(-.41), item 3(.23), item 4(.40), item 5(-.01); item discrimination: item 1(.73), item 2(.73), item 3(.67), item 4(.51), item 5(.56). This means that the test tool could be useful in the evaluation of the fraction computation ability.

  • PDF

2차계획법을 이용(利用)한 비축면적(備蓄面積)의 제한(制限)을 받는 다품종주문량결정(多品種注文量決定) 시스템에 관(關)한 연구(硏究) (A Study of the Multi - Item Order - Level System with Storage Limitation by the Quadratic Programming)

  • 강동진;이상용
    • 대한산업공학회지
    • /
    • 제11권1호
    • /
    • pp.11-19
    • /
    • 1985
  • This paper analyzes the multi-item order-level system with shortages allowance and storage limitation. Up to now, we have used the classical optimization theory to analyze this system. But the theory is generally not suitable for computational purposes. Therefore, this paper designes a new method to be able to apply the quadratic programming to the multi-item order-level system with storage limitation. A numerical example is also presented.

  • PDF

모바일 영어 학습을 위한 지능형 교육 시스템의 설계 (A Design of Intelligent Tutoring System for Mobile English Loaming)

  • 이영석;김병규;조정원;최병욱
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅲ
    • /
    • pp.1681-1684
    • /
    • 2003
  • We propose the intelligent tutoring system for the mobile english learning. The proposed system is based on the item response theory to analyze the level of learner. We define the types of item, teaching method and item disposition according to contents modeling. The system estimates the learner level and it gives the learning contents, the evaluation results, and feedback. The system gives those by inference engine which consists of learner's level estimation value, method diagnostic value and disposition diagnostic value.

  • PDF