• The Journal of Advanced Prosthodontics
• /
• 제6권6호
• /
• pp.434-443
• /
• 2014

PURPOSE. The purpose of this study was to evaluate and compare the effects of different surface pretreatment techniques on the surface roughness and shear bond strength of a new self-adhering flowable composite resin for use with lithium disilicate-reinforced CAD/CAM ceramic material. MATERIALS AND METHODS. A total of one hundred thirty lithium disilicate CAD/CAM ceramic plates with dimensions of $6mm{\times}4mm$ and 3 mm thick were prepared. Specimens were then assigned into five groups (n=26) as follows: untreated control, coating with $30{\mu}m$ silica oxide particles ($Cojet^{TM}$ Sand), 9.6% hydrofluoric acid etching, Er:YAG laser irradiation, and grinding with a high-speed fine diamond bur. A self-adhering flowable composite resin (Vertise Flow) was applied onto the pre-treated ceramic plates using the Ultradent shear bond Teflon mold system. Surface roughness was measured by atomic force microscopy. Shear bond strength test were performed using a universal testing machine at a crosshead speed of 1 mm/min. Surface roughness data were analyzed by one-way ANOVA and the Tukey HSD tests. Shear bond strength test values were analyzed by Kruskal-Wallis and Mann-Whitney U tests at ${\alpha}=.05$. RESULTS. Hydrofluoric acid etching and grinding with high-speed fine diamond bur produced significantly higher surface roughness than the other pretreatment groups (P<.05). Hydrofluoric acid etching and silica coating yielded the highest shear bond strength values (P<.001). CONCLUSION. Self-adhering flowable composite resin used as repair composite resin exhibited very low bond strength irrespective of the surface pretreatments used.

• Journal of Korean Neurosurgical Society
• /
• 제66권5호
• /
• pp.503-510
• /
• 2023

Objective : The present study aimed to determine the topical and systemic efficacy of tranexamic acid (TXA) on epidural fibrosis in a rat laminectomy model. Methods : Thirty-two 12-month-old adult Sprague-Dawley rats were used in this study. Each rat underwent bilateral laminectomy at the L1 and L2 vertebral levels. Rats were divided into four groups : in group I (control group, n=8), a laminectomy was performed and saline solution was applied into the surgical space. In group II (topical group, n=8), laminectomy was performed and 30 mg/kg TXA was applied to the surgical site before skin closure. In group III (systemic group, n=8), 30 mg/kg TXA was administered intravenously via the tail vein in the same session as the surgical procedure. In group IV (topical and systemic group, n=8), TXA was administered 30 mg/kg both topical and intravenous. The rats were sacrificed at 4 weeks postoperatively. Masson's trichrome and hematoxylin and eosin were used to assess acute inflammatory cells, chronic inflammatory cells, vascular proliferation, and epidural fibrosis. Results : Epidural fibrosis, acute inflammation, chronic inflammation, and sum histologic score value were significantly lower in the systemic TXA group, systemic and topical TXA groups than in the control group (p<0.05). In addion, the sum histologic score was significantly lower in the topical TXA group than in the control group (p<0.05). Conclusion : In this study, epidural fibrosis formation was prevented more by systemic application, but the topical application was found to be effective when compared to the control group. As a result, we recommend the systemic and topical use of TXA to prevent epidural fibrosis during spinal surgery.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권22호
• /
• pp.9949-9953
• /
• 2014

Objective: To evaluate the long term results among patients with soft tissue sarcoma of the thoracic wall. Materials and Methods: Twenty-six patients who were treated with pre-or postoperative radiotherapy between December 1980-December 2007, with a diagnosis of soft tissue sarcoma of the thoracic wall were retrospectively evaluated. Results: The median age was 44 years (14-85 years) and 15 of them were male. A total of 50% of patients were grade 3. The most common histologic type of tumor was undifferentiated pleomorphic sarcoma (26.9%). Tumor size varied between 2-25 cm (median 6.5 cm). Seventeen of the cases had marginal and 9 had wide local resection. Four cases received preoperative radiotherapy and 22 postoperative radiotherapy. Six of the patients with large and high grade tumors received chemotherapy. Median follow-up time was 82 months (9-309 months). Local recurrence and metastasis was detected in 34.6% and 42.3% of patients, respectively. Five-year local control (LC), disease-free survival (DFS), overall survival (OS), and disease-specific survival (DSS) were 62%, 38%, 69%, and 76% respectively. On univariate analysis, the patients with positive surgical margins had a markedly lower 5-year LC rate than patients with negative surgical margin, but the difference was not significant (43% vs 78%, p=0.1). Five-year DFS (66% vs 17%) and DSS (92% vs 60%) rates were significantly worse for the patients who had high grade tumors (p=0.01, p=0.008 respectively). Conclusions: Tumor grade and surgical margin are essential parameters for determining the prognosis of thoracic wall soft tissue sarcoma both in our series and the literature.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권5호
• /
• pp.3229-3235
• /
• 2013

Background: Many breast cancers are caused by certain rare and familial mutations in the high or moderate penetrance genes BRCA1, BRCA2 and CHEK2. The aim of this study was to examine the allele and genotype frequencies of seven mutations in BRCA1, BRCA2 and CHEK2 genes in breast cancer patients and to investigate their isolated and combined associations with breast cancer risk. Methods: We genotyped seven mutations in BRCA1, BRCA2 and CHEK2 genes and then analyzed single variations and haplotype associations in 106 breast cancer patients and 80 healthy controls. Results: We found significant associations in the analyses of CHEK2- 1100delC (p=0.001) and BRCA1-5382insC (p=0.021) mutations in breast cancer patients compared to controls. The highest risk was observed among breast cancer patients carrying both CHEK2-1100delC and BRCA2- Met784Val mutations (OR=0.093; 95%CI 0.021-0.423; p=0.001). We identified one previously undescribed BRCA2 and a CHEK2 four-marker haplotype of A-C-G-C which was overrepresented ($X^2$=7.655; p=0.0057) in the patient group compared to controls. Conclusion: In this study, we identified a previously undescribed BRCA2 and CHEK2 A-C-G-C haplotype in association with the breast cancer in our population. Our results further suggest that the CHEK2-1100delC mutation in combination with BRCA2-Met784Val may lead to an unexpected high risk which needs to be confirmed in larger cohorts in order to better understand their role in the development and prognosis of breast cancer.

• Journal of Chest Surgery
• /
• 제51권5호
• /
• pp.333-337
• /
• 2018

Background: Pinch-off syndrome (POS) is a rare complication after totally implantable venous access device (TIVAD) implantation. In cancer patients, it is important to prevent this rare complication and to recognize it early if it does occur. We present a case series of POS after TIVAD implantation and the results of a literature search about this complication. Methods: From July 2006 to December 2015, 924 permanent implantable central venous catheter implantation procedures were performed. The most common indication was vascular access for chemotherapy. Results: POS occurred in 5 patients in our clinic. Two patients experienced POS within 2 weeks, and the other 3 patients were admitted to department of surgery, Istanbul Faculty of Medicine at 6 to 14 months following implantation. The catheters were found to be occluded during medication administration, and all patients complained of serious pain. The transected fragments of the catheters had migrated to the heart. They were successfully removed under angiography with a single-loop snare. Conclusion: POS is a serious complication after TIVAD implantation. It is important to be aware of this possibility and to make an early diagnosis in order to prevent complications such as drug extravasation and occlusion events.

• Structural Engineering and Mechanics
• /
• 제27권5호
• /
• pp.589-607
• /
• 2007

Two series of tests were conducted to investigate the behavior of local thin jacketing for the retrofitting of reinforced concrete (RC) columns. In the first series, four full-scale RC columns with a height of 400 cm and a 30 cm square cross-section were tested under constant axial load and reversed cyclic lateral displacements. The heavily damaged columns were retrofitted with local thin jacketing. Self-compacting concrete (SCC) was used in the production of 7.5 cm thick, four-sided jacketing. The height of the jacketing was 100 cm for one specimen and 200 cm for all others. In the second series, the retrofitted columns were retested with the same axial load and displacement history. The effectiveness of local thin jacketing in the retrofitting of RC columns was examined with respect to lateral strength, stiffness, inelastic load-deformation behavior and energy dissipation.

• Steel and Composite Structures
• /
• 제27권6호
• /
• pp.661-674
• /
• 2018

Seismic excitations may impart a significant amount of energy into structures. Modern structural design attitudes tend to absorb some part of this energy through special dissipaters instead of heavy plastic deformations on the structural members. Different types of dissipater have been generated and utilized in various types of structures in last few decades. The expected earthquake damage is mainly concentrated on these devices and they may be replaced after earthquakes. In this study, a low-cost device called energy dissipative steel cushion (EDSC) made of flat mild steel was developed and tested in the Structural and Earthquake Engineering Laboratory (STEELab) of Istanbul Technical University (ITU). The monotonic and cyclic tests of EDSC were performed in transversal and longitudinal directions discretely. Very large deformation capability and stable hysteretic behavior are some response properties observed from the tests. Load vs. displacement relations, hysteretic energy dissipation properties as well as the closed form equations to predict the behavior parameters are presented in this paper.

• 대한수의학회지
• /
• 제61권3호
• /
• pp.25.1-25.7
• /
• 2021

The axolotl has extraordinary regeneration capacity compared to other vertebrates. This remarkable potential has been attributed to its life-long neoteny, characterized by the exhibition of embryonic characteristics at the adult stage. A recent study provided a detailed morphological analysis of the sperm morphology of the Ambystoma mexicanum using routine and detailed histological techniques. The primary purpose of the present study is to describe a simple and inexpensive method for evaluating the morphology of axolotl sperm. In this study, spermatophore structures were collected and spread on slides and air-dried. The slides were stained with periodic acid Schiff, toluidine blue, Masson's trichrome, Giemsa, Spermac, and Diff-Quik dye for a morphological examination. The slides were coated with gold/palladium for a scanning electron microscopy examination. The sperm of the axolotl consisted of an elongated head, a neck, and a flagellum covered with an undulating membrane. The lengths of the midpiece, tail, and head were 8.575 ㎛, 356.544 ㎛, and 103.661 ㎛, respectively. In the flagellum part, the wavy membrane structure, whose function has not been explained, surrounds the tail. The data obtained from this study will constitute an important step in designing future research on the reproductive and regeneration capacity of the axolotl.

• 호남수학학술지
• /
• 제40권4호
• /
• pp.681-689
• /
• 2018

In this paper, we defined new subclasses of Spirallike and Robertson functions by using concept of q-derivative operator. We investigate convolution properties and coefficient estimates for both classes q-Spirallike and q-Robertson functions denoted by ${\mathcal{S}}^{\lambda}_q[A,\;B]$ and ${\mathcal{C}}^{\lambda}_q[A,\;B]$, respectively.

• Geomechanics and Engineering
• /
• 제14권6호
• /
• pp.509-517
• /
• 2018

This paper proposes a numerical methodology for capturing the complete curve of a pressuremeter test including initial or disturbed parts and loops through a stiffness-based approach adopted in three dimensional finite difference code, FLAC3D. In order to enable this, a new hyperbolic model was used to replace the conventional linear elastic model prior to peak strength of Mohr-Coulomb soil model and update or degradation of shear modulus was considered. Presented modeling approach and implemented constitutive model are impressively successful. It leads to obtain the whole set of parameters for characterizing sands and seems promising for modeling the most of geotechnical structures.