• 한국자동차공학회논문집
• /
• 제8권4호
• /
• pp.141-148
• /
• 2000

As the steel plates used for automobile safety the TRIP-assisted multiphase steels are being introduced to automobile industry with respect to their remarkable mechanical properties for the combination of high strength and large elongation. This multiphase structure is generated by two stage heat treatment (intercritical annealing & isothermal treatment) The metastable retained austenite can be transformed to martensite when plastically deformed which results in TRIP effect. Actually the microstructure of TRIP-assisted steels consist of a fine dispersite. There present discussion deals with bainite reaction kinetics of austenite in the process o f two stage heat treatment. In relation to bainite transformation the characteristics of bainite reaction is found to be influenced by the bainite tempering temperature and also by the relative rate in which carbides precipitate within residual austenite.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.60-63
• /
• 2007

The effect of process parameters on springback of AZ31B magnesium alloy sheet was investigated by performing 2D draw bending test at the elevated temperatures. And also the springback characteristics were studied different blank holding forces between 30 to 250 kgf. Springback was considerably reduced at higher temperatures than $200^{\circ}C$. The blank holding force in the range used, however, had little influence on springback in isothermal tests. For a given temperature, springback decreased with increasing blank holding force in non-isothermal tests.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 제11차 KACG 학술발표회 Crystalline Particle Symposium (CPS)
• /
• pp.109-128
• /
• 1996

• Journal of Mechanical Science and Technology
• /
• 제19권4호
• /
• pp.1044-1051
• /
• 2005

The isothermal characteristics of a rectangular parallelepiped sodium heat pipe were inves­tigated for high-temperature applications. The heat pipes was made of stainless steel of which the dimension was $140\;m\;(L)\;{\times}\;95m\;(W)\;{\times}\;46 m\;(H)$ and the thickness of the container was 5 mm. Both inner surfaces of evaporator and condenser were covered with screen meshes to help spread the liquid state working fluid. To provide additional path for the working fluid, a lattice structure covered with screen mesh wick was inserted in the heat pipe. The bottom surface of the heat pipe was heated by an electric heater and the top surface was cooled by circulating coolant. The concern in this study was to enhance the temperature uniformity at the bottom surface of the heat pipe while an uneven heat source up to 900 W was in contact. The temperature distribution over the bottom surface was monitored at more than twenty six locations. It was found that the operating performance of the sodium heat pipe was critically affected by the inner wall temperature of the condenser region where the working fluid may be changed to a solid phase unless the temperature was higher than its melting point. The maximum temperature difference across the bottom surface was observed to be $114^{\circ}C$ for 850 W thermal load and $100^{\circ}C$ coolant inlet temperature. The effects of fill charge ratio, coolant inlet temperature and operating temperature on thermal performance of heat pipe were analyzed and discussed.

• Journal of Mechanical Science and Technology
• /
• 제19권4호
• /
• pp.1036-1043
• /
• 2005

Concentric annular heat pipes (CAHP) were fabricated and tested to investigate their thermal characteristics. The CAHPs were 25.4 mm in outer diameter and 200 mm in length. The inner surface of the heat pipes was covered with screen mesh wicks and they were connected by four bridge wicks to provide liquid return path. Three different heat pipes were fabricated to observe the effect of change in diameter ratios between 2.31 and 4.23 while using the same outer tube dimensions. The major concern of this study was the transient response as well as isothermal characteristics of the heat pipe outer surface, considering the application as uniform heating device. A better performance was achieved as the diameter ratio increased. For the thermal load of 180 W, the maximum temperature difference on the outer surface in the axial direction of CAHP was $2.3^{\circ}C$ while that of the copper block of the same outer dimension was $5.9^{\circ}C.$ The minimum thermal resistance of the CAHP was measured to be $0.004^{\circ}C/W.$ In regard to the transient response during start-up, the heat pipe showed almost no time lag to the heat source, while the copper block of the same outer dimensions exhibited about 25 min time lag.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.2954-2966
• /
• 1994

The characteristics and good corrosion resistance at room and elevated temperatures led to increasing application of Ti-alloys such as aircraft, jet engine, turbine wheels. In forging of Ti-alloy at high temperature, die chilling and die speed should be carefully controlled because the flow stress of Ti-alloy is sensitive to temperature, strain and strain-rate. In this study, the forging of turbine disk was numerically simulated by the finite element method for hot-die forging process and isothermal forging process, respectively. The effects of the temperature changes, the die speed and the friction factor were examined. Also, local variation of process parameters, such as temperature, strain and strain-rate were traced during the simulation. It was shown that the isothermal forging with low friction condition produced defect-free disk under low forging load. Consequently, the simulational information will help industrial workers develope the forging of Ti-alloys including 'preform design' and 'processing condition design'. It is also expected that the simulation method can be used in CAE of near net-shape forging.

• Carbon letters
• /
• 제9권4호
• /
• pp.308-315
• /
• 2008

In the present study, fast isothermal stabilization processes for rayon precursor fabrics were performed at $350^{\circ}C$ and $400^{\circ}C$ within 3 minutes and the chemical and physical characteristics of the stabilized fabrics were investigated. In addition, rayon precursor fabrics were pre-treated with three different phosphorous-based flame retardants and then stabilized. The effect of flame retardants on the chemical composition, thermal shrinkage, weight change, thermal stability and XRD results was examined, comparing with those of the precursor fabrics. The result showed that the stabilization of rayon fabrics was most effective as the stabilization temperature was $350^{\circ}C$, the stabilization time was 3 min, and the pre-treatment with phosphoric acid of 1 vol%. The carbon contents of stabilized rayon fabrics were increased with increasing stabilization temperature and time, whereas the oxygen contents were decreased. Also, it is likely that the pre-treatment with phosphoric acid plays a role in retarding the change of chemical structure of rayon fabric. The XRD result was quite consistent with the result showing the effect of phosphoric acid on the chemical composition, thermal shrinkage and weight reduction of rayon fabric.

• 폴리머
• /
• 제33권3호
• /
• pp.230-236
• /
• 2009

비닐 아세테이트/알킬메타크릴레이트계 에멀젼 공중합에서 반응온도, 개시제의 종류와 농도, 보호콜로이드인 PVA의 종류와 농도, 공단량체인 MMA, EMA의 조성비를 변화시키며 중합하였다. 제조된 공중합체인 poly(vinyl acetate-co-methyl methacrylate)(PVAc/PMMA), poly(vinyl acetate-co-ethyl methacrylate)(PVAc/PEMA)를 수분 측정기를 사용하여 100, 130, 150, 180, $200^{\circ}C$에서 등온건조 시키고, 그 건조 특성을 고찰하여 다음과 같은 결론을 얻었다. 등온법으로 얻은 중합체 고형화 과정의 활성화 에너지는 PVAc/PMMA> PVAc/PEMA> PVAc의 순으로 공단량체의 곁사슬의 탄소수 증가에 따라 감소하였다. 접착박리강도는 동일한 조성의 공중합체에서 보호콜로이드 함량에 비례하여 증가하였고, 내수 접착박리강도는 최적의 보호콜로이드 함량에서 공단량체의 종류와 함량에 따라 PVAc/PMMA>PVAc/PEMA>PVAc 순이다.

• 한국추진공학회지
• /
• 제22권4호
• /
• pp.55-60
• /
• 2018

열적 특성은 에너지 물질 분야에서 중요한 특성 중 하나로, 분해열을 방출하기 때문에, 열적 특성 분석에 DSC(Differential Scanning Calorimetry)가 자주 사용된다. 그러나 DSC 측정의 경우, 용융과 같은 열역학적 변화가 kinetics 분석에 방해를 끼친다. 이번 연구에서는 이 문제점을 해결하는 방안으로, 등온 조건으로 한 DSC 기초 데이터와 g 단위로 측정하는 ARC(Accelerating Rate Calorimetry)의 데이터를 이용하여 AKTS(Advanced Kinetics and Technology Solutions) thermokinetic 프로그램을 이용하여 열적 노화 특성을 예측, 비교한다.

• 열처리공학회지
• /
• 제34권6호
• /
• pp.287-293
• /
• 2021

This study was intended to investigate the influence of Al content on hardness and microstructural characteristics of discontinuous precipitates (DPs) formed by isothermal aging in Mg-8.7%Al and Mg-10%Al alloys. In order to obtain large amount of DPs in the microstructure, the alloy specimens were solution-treated at 688K for 24 h followed by water quenching, and then aged at 418K for 48h. The Mg-Al alloy with higher Al content was characterized by higher volume fraction of DPs at the same aging condition, lower interlamellar spacing of the DPs, thinner β phase layer and higher β phase content in the DPs. This is closely related to the higher velocity of discontinuous precipitation process resulting from the higher Al supersaturation in the α-(Mg) matrix. The Mg-10%Al alloy showed higher hardness of the DPs and greater difference in hardness between as-cast state and DPs than the Mg-8.7%Al alloy.