• Applied Biological Chemistry
• /
• 제43권2호
• /
• pp.116-123
• /
• 2000

작물이 자라는 토양에서 점적 관개에 의해 일어나는 토양 수분의 분포와 이동을 3차원 직교 좌표계로 예측할 수 있는 수학적 모델을 개발하였다. 모델은 지면 증발과 증산을 고려하였으며, 이들의 계절적 현화와 하루 중의 시간변화 뿐 아니라 작물 뿌리의 성장 및 뿌리의 토양 중 분포형태도 고려하였다. 모델의 해는 block centered grid system등을 적용하여 Crank-Nicolson법과 Gauss-Seidel 반복법을 사용하여 구하였다. 모델은 실험을 통해 검증하였으며, 점적 관개의 특성을 알기 위하여 모델을 이용한 컴퓨터 모사를 실시하였고, 본 연구의 조건으로부터 다음의 결과를 얻었다. (1) 관수된 물은 점적기에서 멀어짐에 따라 그 유속이 크게 감소하였고, 관수 시간이 증가함에 따라 습윤구역의 크기가 증가하는 속도도 급격히 감소하였다. (2) 1점 관수의 경우 습윤구역은 수평 방향보다는 수직 방향으로 더 깊이까지 도달하였다. (3) 본 연구조건에서 물이용 효율은 지하 25cm지점의 4점 관수가 가장 좋았으며, 지표면 1점 관수보다 증산량은 10% 증가, 지면 증발량은 20% 감소하였다. (4) disk tension infiltrometer에 의한 토양의 수분보유도 함수는 토양수분 압출에 의한 젖음 곡선과는 상당한 차이를 나타내는 것도 알 수 있었다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.238-238
• /
• 2015

There are demands for water environmental analysis of discharge processes in paddy fields, however, it is not fully understood in nutrients discharge process for watershed modeling. As hydrological processes both surface and ground water and agricultural water managements are so complex in paddy fields, the development of lowland paddy fields watershed model is more difficult than upland watershed model. In this research, the improvement of SWAT (Soil and Water Assessment Tool) model for a paddy watershed was conducted. First, modification of surface inundated process was developed in improved pot hole option. Those modification was evaluated by monitoring data. Second, the monitoring data in river and drainage channel in lowland paddy fields from 2012 to 2014 were analyzed to understand discharge characteristics. As a case study, Imbanuma basin, Japan, was chosen as typical land and water use in Asian countries. In this basin, lowland paddy fields are irrigated from river water using small pumps that were located in distribution within the watershed. Daily hydrological fluctuation was too complex to estimate. Then, to understand surface and ground water discharge characteristics in irrigation (Apr-Aug) and non-irrigation (Sep-Mar) period, the water and material balance analysis was conducted. The analysis was composed two parts, watershed and river channel blocks. As results of model simulation, output was satisfactory in NSE, but uncertainty was large. It would be coming from discharge process in return water. The river water and ground water in paddy fields were exchanged each other in 5.7% and 10.8% to river discharge in irrigation and non-irrigation periods, respectively. Through this exchange, nutrient loads were exchanged between river and paddy fields components. It suggested that discharge from paddy fields was not only responded to rainfall but dynamically related with river water table. In general, hydrological models is assumed that a discharge process is one way from watershed to river. However, in lowland paddy fields, discharge process is dynamically changed. This function of paddy fields showed that flood was mitigated and temporally held as storage in ground water. Then, it showed that water quality was changed in mitigated function in the water exchange process in lowland paddy fields. In future, it was expected that hydrological models for lowland paddy fields would be developed with this mitigation function.

• 한국관개배수논문집
• /
• 제18권2호
• /
• pp.43-53
• /
• 2011

In this study, the internal development of the Saemangeum basic concept of the changes being promoted as a lead construction and agricultural land works(54.2 km) has established a numerical model for the scenario. Inner dike to the construction site to reflect the following conditions to reproduce the numerical model by each areas during construction inner dike where scour expected to perform a numerical analysis for the hydraulic review by areas with possible future changes were to predict. Simulation results showed that numerical simulation results for scour expected frequency of 100 years in flood conditions is simulated with 0.02 m/s~l.27 m/s scour velocity for high-impact factor is considered to be stable. Each start point and end point work area of inner dike reviewed and flow rate of 100 years flood, the velocity distribution in the influx of a large flow rate of 0.02 m/s~1.68 m/s occur during construction inner dike are not being evaluated as a special issue does not occur will be considered according to the method and order of construction inner dike stability review suggests that the future need to be made.

• 대한토목학회논문집
• /
• 제10권2호
• /
• pp.59-65
• /
• 1990

3차원 비정상류모형을 사용하여 출도대지(出島台地)의 소유역에 있어서 인위적및 자연적 요인이 지하수유동에 미치는 영향에 대하여 고찰하였다. 3차원 비정상류모형의 검정을 위하여, 모형에 의한 수치해석해와 Theis의 해석해를 비교한 결과 서로 좋은 대응을 나타내었다. 모의발생은 용수로(用水路)를 통하여 관개가 시작되는 5월 1일부터 30일간 행하였다. 지하수 유동양상을 포텐샬도로 나타내었으며 그에 대한 고찰이 있었다. 본 해석으로 부터 인위적 영향을 받는 지역의 지하수유동계를 해석하기 위해서는 3차원 비정상류모형이 유용하다고 사료되었다.

• International Journal of Fluid Machinery and Systems
• /
• 제9권4호
• /
• pp.287-299
• /
• 2016

In China, agricultural irrigation water often contains a lot of suspended sediment which may cause the nozzle wear. In this study, a new numerical simulation combing the Discrete Phase Model and a remeshing algorithm was conducted. The geometric boundary deformation caused by the erosion wear, was considered. The weight loss of the nozzle, the node displacement and the flow field were investigated and discussed. The timestep sensitivity analysis showed that the timestep is very critical in the erosion modeling due to the randomness and the discreteness of the erosion behavior. Based on the simulation results, the major deformation of the boundary wall due to the erosion was found at the corners between outlet portion and contraction portion. Based on this remeshing algorithm, the simulated erosion weight loss of the nozzle is 4.62% less compared with the case without boundary deformation. The boundary deformation changes the pressure and velocity distribution, and eventually changes the sediment distribution inside the nozzle. The average turbulence kinetic energy at the outlet orifice is found to decrease with the erosion time, which is believed to change the nozzle's spray performance eventually.

• 한국관개배수논문집
• /
• 제14권1호
• /
• pp.50-56
• /
• 2007

In this study, the Soil and Water Assessment Tool (SWAT) model was used to assess spatiotemporal effects on watershed runoff and sediment characteristics due to land uses changes from 1999 to 2002 at the small watershed, located in Chuncheon-si, Gangwon province. The annual average flow rate of Scenario I (long-term simulation using land use of 1990), II (long-term simulation using land use of 1996), III(long-term simulation using land use of 200) and IV(simulation using land use of 1990, 1995, and 2000) in long-term simulation) using the SWAT model were 29,997,043 m3, 29,992,628 m3, 29,811,191 m3 and 29,931,238 m3, respectively. It was shown that there was no significant changes in estimated flow rate because no significant changes in land uses between 1990 and 2000 were observed. The annual average sediment loads of Scenarios I, II, III and IV for 15 year period were 36,643 kg/ha, 45,340 kg/ha , 27,195 kg/ha and 35,545 kg/ha, respectively. The estimated annual sediment loads from Scenarios I, II, and III, were different from that from the scenario IV, considering spatio-temporal changes in land use and meterological changes over the years, by 10%, 127%, and temporal changes in land use and meterological changes over the years, by 10%, 127%, and 77%. This can be explained in land use changes in high soil erosion potential areas, such as upland areas, within the study watershed. The comparison indicates that changes in land uses upland areas, within the study watershed. The comparison indicates that changes in land uses can affect on sediment yields by more than 10%, which could exceed the safety factor of 10% in Total Maximum Daily Loads (TMDLs). It is, therefore, recommended that not only the temporal analysis with the weather input data but also spatial one with different land uses need to be considered in long-term hydrology and sediment simulating using the SWAT model

• 한국농공학회논문집
• /
• 제54권4호
• /
• pp.65-71
• /
• 2012

The objective of this study was to estimate surface runoff from rice paddy plots using an artificial neural network (ANN). A field experiment with three treatment levels was conducted in the NICS saemangum experimental field located in Iksan, Korea. The ANN model with the optimal network architectures, named Paddy1901 with 19 input nodes, 1 hidden layer with 16 neurons nodes, and 1 output node, was adopted to predict surface runoff from the plots. The model consisted of 7 parameters of precipitation, irrigation rate, ponding depth, average temperature, relative humidity, wind speed, and solar radiation on the daily basis. Daily runoff, as the target simulation value, was computed using a water balance equation. The field data collected in 2011 were used for training and validation of the model. The model was trained based on the error back propagation algorithm with sigmoid activation function. Simulation results for the independent training and testing data series showed that the model can perform well in simulating surface runoff from the study plots. The developed model has a main advantage that there is no requirement for any prior assumptions regarding the processes involved. ANN model thus can be a good tool to predict surface runoff from rice paddy fields.

• 한국관개배수논문집
• /
• 제18권2호
• /
• pp.54-65
• /
• 2011

This study was performed to analyze the influence of pollutant loads characteristics on the point and non-point sources in Saemangeum watershed area using Hydrological Simulation Program, Fortran (HSPF). The simulation items were flow, BOD, T-N, and T-P(2007~2010). The pollutant loads trend reflects the precipitation. Specifically, the point source loads were almost constant, but the non-point source loads were influenced in the precipitation. It was found that the effect of non-point source is larger than point source. The water quality had a clear trend by the season. However, pollutant loads did not show distinct seasonal changes. The reason is that the pollutant concentration is diluted by the increased flow at summer season. Therefore, it is important to control the non-point source in order to manage water quality in the region. For the management of Saemangeum lake, it is need to control of supplied pollutant loads from Saemangeum watershed.

• 한국물환경학회지
• /
• 제31권5호
• /
• pp.507-522
• /
• 2015

In this study, some of the model verification results of STREAM (Spatio-Temporal River-basin Ecohydrology Analysis Model), a newly-developed hybrid watershed model, are presented for the runoff processes of nonpoint source pollution. For verification study of STREAM, the model was applied to a test watershed and a sensitivity analysis was also carried out for selected parameters. STREAM was applied to the Mankyung River Watershed to review the applicability of the model in the course of model calibration and validation against the stream flow discharge, suspended sediment discharge and some water quality items (TOC, TN, TP) measured at the watershed outlet. The model setup, simulation and data I/O modules worked as designed and both of the calibration and validation results showed good agreement between the simulated and the measured data sets: NSE over 0.7 and $R^2$ greater than 0.8. The simulation results also include the spatial distribution of runoff processes and watershed mass balance at the watershed scale. Additionally, the irrigation process of the model was examined in detail at reservoirs and paddy fields.

• International Journal of Fluid Machinery and Systems
• /
• 제7권2호
• /
• pp.68-79
• /
• 2014

The type of turbine developed is based on the very low head of water potential source for the electric power production. The area of research is focused for the axial water turbine that can be applied at the simple site open channel with has a very low cost and environmental impact compared to the conventional hydro installation. High efficiency of axial turbine which applied to the very low potential head will made this type of turbine can be used at wider potential site. Existing irrigation weir and river area will be the perfect site for this turbine. This paper will compare the effects of the variation of swirl velocity criterion during the design of the blade of guide vane and rotor of the turbine. Effects of the swirl velocity criterion is wider known as a vortex conditions (free vortex, force vortex and swirl velocity constant), and the free vortex is the very popular condition that applied by most of turbine designer, therefore will be interesting to do a comparison against other criterion. ANSYS Fluent will be used for simulation and to determine the predictive performance obtained by each of design criteria.