• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.3074-3080
• /
• 2013

Amplification of wave height at concave corner was investigated by three dimensional hydraulic tests. A typical rubble mound structure was tested with two-layer Tetrapod and the slope of 1:1.5. The irregular waves with Bretschneider-Mitsuyasu spectrum were applied to the tests. The center angles of concave corner were 120 degree, 140 degree and 160 degree. According to the test results, the maximum wave height amplification ratio at concave corner was about 1.5 times of incident wave height among the all test conditions, and the W-shaped wave height distribution was shown.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.1
• /
• pp.19-28
• /
• 2016

In the case of structural analysis for building structures, the super-structure and the sub-structure are analyzed by using separate structural models in the field because of time saving, facile result interpretation and easy analysis of dynamic behavior. However this separate structural model violated the compatibility condition of structural analysis and it can not consider the interaction of superand sub- structures. In the present study, the analysis results of this separate model were compared to those of the unified model of super- and sub- structures which can consider the interaction of super- and sub- structures and reflect the realistic boundary conditions. According to the comparison results, the the analysis model using separate models can underestimate the member force and deflection of structural members in the super-structures and overestimate the deflection and member force of sub-structures. Therefore, in the case of high-rise buildings, irregular shaped buildings, buildings which are expected to be affected by large differential settlement and remodeling buildings, the unified structural model for super- and sub- structures was recommended for structural analysis instead of the separate structural model.

• Journal of Life Science
• /
• v.23 no.3
• /
• pp.341-346
• /
• 2013

The disappearance of seaweed flora in some rocky areas, which is known as algal whitening, barren ground, coralline flats, or deforested areas, is associated with some species of coralline algae. To determine the biological characteristics of a representative species of crustose coralline alga, the 18S rDNA gene was sequenced to identify the genus Lithophyllum. According to its morphological and distributional characteristics, it was deduced to be L. yessoense. Viability was measured using triphenyl tetrazolium chloride and showed high viability from December to February. Culture conditions of $16^{\circ}C$, a 16 hr light, 8 hr dark cycle, and 30 ${\mu}E/m^2/s$ light intensity were optimal for maintaining the viability of the alga for up to five days. Included in the fatty acids was 9.7% ${\omega}$-3 eicosapentaenoic acid. An electron microscopy scan of the surface structure revealed round craters about 3.6 ${\mu}m$ in diameter, which were covered with rough, irregular, and angular polygon-shaped structures about 1.0 to 3.7 ${\mu}m$ in size. Based on the composition and structure found in our study, biomimetic coralline alga might become an environmentally friendly antifouling material against the attachment of soft foulants.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.1
• /
• pp.61-78
• /
• 2016

This study through the literature research to understand the most representative art trend - the definition and evolution of the Cubism in the early 20th century, and through the analysis on the representative painter's works, such as works of Pablo Ruiz Picasso and Georges Braque, This article raises the unique characteristics of the Cubist painting, such as geometry modeling, simultaneity, transparency, collage, deconstruction and reconstruction, etc. On the basis of theoretical research in this study, in order to meet the novelty and originality of clothing design requirements in the field, this research uses the modeling characteristics of the Cubist painting, designs and makes five sets of works in costume designing. Research findings are as follows, 1) According to the geometry modeling, split garment surface into triangle or irregular polygon shaped. 2) Show front and side images of the characters in the same garment surface. 3) Overlapping the images of the characters in the same garment surface. 4) Make use of composite materials to express the characters. 5) Disassemble the characters recombine them in an abstract painting way. These works mainly completed by adopting some techniques like Patchwork and Figurative painting. The colors consist of red, yellow and blue caused "Three primary colors series" to achieve the goal of expanding visual effect. Additionally, for the sake of the formal beauty-deformation distortion, symmetric and asymmetric, for instance the structure of the costume adopts formal beauty technique.

• Journal of the Korean Vacuum Society
• /
• v.5 no.4
• /
• pp.333-340
• /
• 1996

The properties of TiN as a barrier against Cu diffusion ere studied by sheet resistance measurement, X-ray diffraction, scanning electron microscopy, Auger electron spectroscopy, and capacitance-voltage(C-V) measurement. The sensitivities of the various methods were compared. Specimens with Cu/TiN/Ti/SiO2/Si structure were prepared by various deposition techniques and annealed at various temperatures ranging from $500^{\circ}C$ to $800^{\circ}C$ in 10%H2/90%Ar ambient for hours. As the effectiveness of the barrier property of TiN against Cu diffusion was vanished, the irregular-shaped sports were observed and outdiffused Si were detected on the surface of the Cu thin film. The C-V characteristics of the MOS capacitors varied drastically with annealing temperatures. In C-V measurement, the inversion capacitance decreased at annealing temperature range from $500^{\circ}C$ to $700^{\circ}C$ and increased remarkably at $800^{\circ}C$. These variations may be due to the Cu diffusion through TiN into $SiO_2$ and Si.

• Parasites, Hosts and Diseases
• /
• v.23 no.1
• /
• pp.111-122
• /
• 1985

The present study was performed to observe the ultrastructure of the integument of adult Paragonimus westermani. Dogs experimentally infected with 60 metacercariae of F. westermani were autopsied 4 months after the infection. Adult p. westermani were extracted from the dogs and the fine structure was studied by means of scanning and transmission electron microscope. The findings are as follows: 1. Scanning electron microscopic findings showed that the spines and the papillae are distributed at whole body surface but the well developed spines or papaillae are shown around the oral sucker and ventral sucker. 2. At the end of the body, excretory pore was found, the shape was irregular. 3. Transmission electron microscopic findings showed that plasma membrane, tegument, basal lamina, connective tissue, circular muscle layer, longitudinal muscle layer. nerve axon and tegumental cell were observed. 4. In higher magnification, plasma membrance and bar-shaped granules were found at the outer surface of the tegument.

• Progress in Medical Physics
• /
• v.27 no.4
• /
• pp.196-202
• /
• 2016

We aim to develop the breast bolus by using a 3D printer to minimize the air-gap, and compare it to commercial bolus used for patients undergoing reconstruction in breast cancer. The bolus-shaped region of interests (ROIs) were contoured at the surface of the intensity-modulated radiation therapy (IMRT) thorax phantom with 5 mm thickness, after which the digital imaging and communications in mdicine (DICOM)-RT structure file was acquired. The intensity-modulated radiation therapy (Tomo-IMRT) and direct mode (Tomo-Direct) using the Tomotherapy were established. The 13 point doses were measured by optically stimulated luminescence (OSLD) dosimetry. The measurement data was analyzed to quantitatively evaluate the applicability of 3D bolus. The percentage change of mean measured dose between the commercial bolus and 3D-bolus was 2.3% and 0.7% for the Tomo-direct and Tomo-IMRT, respectively. For air-gap, range of the commercial bolus was from 0.8 cm to 1.5 cm at the periphery of the right breast. In contrast, the 3D-bolus have occurred the air-gap (i.e., 0 cm). The 3D-bolus for radiation therapy reduces the air-gap on irregular body surface that believed to help in accurate and precise radiation therapy due to better property of adhesion.

• Applied Microscopy
• /
• v.15 no.2
• /
• pp.111-129
• /
• 1985

The morphology and histology of the gastrointestinal mucosa of the mole, Talpa micrura coreana (Thomas), were studied using light and scanning electron microscopes. Tissue specimens were taken from body and pyloric portions of the stomach, and from the initial, proximal, middle, distal and terminal portions of the intestine. For light microscopy, tissue blocks were fixed in 10% buffered neutral formalin, embedded in paraffin wax, and sectioned at a thickness of $5{\mu}m$. These sections were stained with hematoxylin-eosin. For scanning electron microscopy, tissue blocks were fixed in 1% glutaraldehyde-1.5% paraformaldehyde, and postfixed in 1% osmium tetroxide, dehydrated in graded alcohol, transferred to isoamylacetate and dried by the critical point drier(Polaron E 3000). Subsequently, specimens were coated with gold and observed with a JSM-35C scanning electron microscope. The results were as follows: The mucous membrane of the body portion of the stomach had numerous irregular folds and the pyloric mucosa formed the strawberry-shaped folds, and general histological structures of each portion were similar to those of man. The intestine could not be differentiated macroscopically and microscopically into small and large intestines. There was no cecum, appendix, taenia coli, haustra coli or appendices epiploicae. In the initial portion (4 mm long), conical or tongue-shaped villi with the height of $143.3{\pm}10.7{\mu}m$ were present, and large mucous glands were seen in the submucosa. In the proximal, middle and distal portions, wavy folds composed of the epithelium and lamina propria were densely and transversely arranged, and their heights were $440.4{\pm}45.5{\mu}m,\;454.4{\pm}19.9{\mu}m\;and\;205.2{\pm}33.5{\mu}m$, respectively. The mucosa of the terminal portion (3 cm long) formed several longitudinal folds, and the intestinal glands were directly opened on the smooth surface of the folds. Aggregated lymphoid follicles were observed in the major portions of the intestine except the initial and terminal portions. There was no circular or semilunar fold throughout the intestine.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.5
• /
• pp.488-496
• /
• 2023

Ship and bridge structures are a type of long box-shaped structure, and resistance to vertical bending moment is a key factor in their structural design. In particular, because box girders are repeatedly exposed to irregular wave loads for a long time, the continuous collapse behavior of structural members must be accurately predicted. In this study, plastic collapse behavior, including buckling according to load changes of the box girder receiving pure bending moments, was analyzed using a numerical analysis method. The analysis targets were selected as three box girders used in the Gordo experiment. The cause of the difference was considered by comparing the results of the structural strength experiment with those of non-linear finite element analysis. This study proposed a combination of the entire and local sagging shape to reflect the effect of the initial sagging caused by welding heat that is inevitably used to manufacture carbon steel materials. The procedures reviewed in the study and the contents of the initial sagging configuration can be used as a good guide for analyzing the final strength of similar structures in the future.

• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.214-220
• /
• 2013

Hydrophobic coating on a silicate-based yellow phosphor ($Sr_2SiO_4:Eu^{2+}$) was carried out by using hexamethyldisiloxane (HMDSO) precursor in an atmospheric pressure dielectric barrier discharge plasma reactor, eventually to improve the long-term stability and reliability of the phosphor. The phosphor powder samples were characterized by a scanning electron microscope (SEM), a transmission electron microscope (TEM), a fluorescence spectrophotometer and a contact angle analyzer. After the coating was prepared, the contact angle of the phosphor powder increased to $133.0^{\circ}$ for water and to $140.5^{\circ}$ for glycerol, indicating that a hydrophobic layer was formed on its surface. The phosphor coated with HMDSO exhibited photoluminescence enhancement up to 7.8%. The SEM and TEM images of the phosphor powder revealed that the plasma coating led to a morphological change from grain-like structure to smooth surface with 31~46 nm thick hydrophobic layer. The light emitting diode (3528 1 chip LED) fabricated with the coated phosphor showed a substantial enhancement in the reliability under a special test condition at $85^{\circ}C$ and 85% relative humidity for 1,000 h (85/85 testing). The plasma-mediated method proposed in this work may be applicable to the formation of 3-dimensional coating layer on irregular-shaped phosphor powder, thereby improving the reliability.