• 대한화학회지
• /
• 제39권3호
• /
• pp.186-190
• /
• 1995

바닷물 중의 미량 철을 별도의 사전 농축이나 분리절차 없이 바로 정량할 수 있을 만큼 예민하면서 비용이 절감되는 손쉬운 흡착 벗김 분석 방법을 제안한다. 용액의 pH가 8.0인 붕산염 완충액에서 철/카테콜 착물을 수은 방울전극에 흡착시켜 수집한 후 음극 벗김과정을 수행하면서 펄스차이 방식 전류를 측정한다. 최적조건은 2.5 mM 붕산염, pH 8.0, 2 mM 카테콜, 수집전위 -0.25 V, 수집시간 1~3분이었다. 이 조건에서의 검출한계는 1.5 nM Fe였다. 붕산염 완충용액(높은 pH)의 사용은 기존의 지지전해질에서 문제되던 구리의 방해를 피할 수 있음은 물론 바탕선의 기울기가 완만해져 바탕선 잡기가 매우 좋았으므로 정밀성의 향상을 기대할 수 있다. 표준물 첨가법에 의해 실제시료에 적용해 본 결과 기대에 잘 부합하였다.

• Bulletin of the Korean Chemical Society
• /
• 제21권6호
• /
• pp.588-594
• /
• 2000

Structural changes of an iron phthalocyanine (FePC) monolayer induced by adsorption and externally applied potential on high area carbon surface have been investigated in situ by iron K-edge X-ray absorption fine structure (XAFS) in 0.5 M $H_2S0_4.$ Fine structures shown in the X-ray absorption near edge structure (XANES) for microcrystalline FePC decreased upon adsorption and further diminished under electrochemical conditions. Fe(II)PC(-2) showed a 1s ${\rightarrow}$ 4p transition as poorly resolved shoulder to the main absorption edge rather than a distinct peak and a weak 1s ${\rightarrow}$ 3d transition. The absorption edge position measured at half maximum was shifted from 7121.8 eV for Fe(lI)PC(-2) to 7124.8 eV for $[Fe(III)PC(-2)]^+$ as well as the 1s ${\rightarrow}$ 3d pre-edge peak being slightly enhanced. However, essentially no absorption edge shift was observed by the 1-electron reduction of Fe(Il)PC(-2), indicating that the species formed is $[Fe(II)PC(-3)]^-$. Structural parameters were obtained by analyzing extended X-ray absorption fine structure (EXAFS) oscillations with theoretical phases and amplitudes calculated from FEFF 6.01 using multiple-scattering theory. When applied to the powder FePC, the average iron-to-phthalocyanine nitrogen distance, d(Fe-$N_p$) and the coordination number were found to be 1.933 $\AA$ and 3.2, respectively, and these values are the same, within experimental error, as those reported ( $1.927\AA$ and 4). Virtually no structural changes were found upon adsorption except for the increased Debye-Wailer factor of $0.005\AA^2$ from $0.003\AA^2.$ Oxidation of Fe(II)PC(-2) to $[Fe(III)PC(-2)]^+$ yielded an increased d(Fe-Np) (1 $.98\AA)$ and Debye-Wailer factor $(0.005\AA^2).$ The formation of $[Fe(II)PC(-3)]^-$, however, produced a shorter d(Fe-$N_p$) of $1.91\AA$ the same as that of crystalline FePC within experimental error, and about the same DebyeWaller $factor(0.006\AA^2)$.

• Composites Research
• /
• 제29권4호
• /
• pp.179-185
• /
• 2016

A self-charging supercapacitor is constructed through simple integration of the energy storage and photo exited materials at the photo electrode. The large band gap of $NiO/Fe_3O_4$ heterostructure generates photo electron at the photo electrode and store the charges through redox mechanism at the counter electrode. Sulfanilic acid azocromotrop/reduced graphene oxide layer at the photo electrode trapped the photo generated hole and store the charge by forming double layer. The solar supercapacitor device is charged within 400 s up to 0.5 V and exhibited a high specific capacitance of ~908 F/g against 1.5 A/g load. The solar illuminated supercapacitor shows a high energy and power density of 33.4 Wh/kg and 385 W/kg along with a very low relaxation time of ~15 ms ensuring the utility of the self charging device in the various field of energy storage and optoelectronic application.

• Bulletin of the Korean Chemical Society
• /
• 제16권9호
• /
• pp.819-823
• /
• 1995

Thin films of two kinds of Prussian Blue (PB)-modified, using iron(Ⅲ) complex instead of conventional FeCl3, were prepared on a gold substrate and these films were able to be electrochemically reduced in potassium nitrate solution. In case of PB-modified films prepared from Fe(Ⅲ)-ethylenediamine-N,N'-diacetic acid (FeEN3+)/K3Fe(CN)6 solution, the mid-peak potential was 0.156 V in 0.1 M KNO3 and it was found that potassium ion migrates into or out of the film during the electrolysis. These films were shown to be electrochromic. These films exhibited smaller peak separation than those formed from Fe(Ⅲ)-tartaric acid (FeTA3+)/K3Fe(CN)6 system. The diffusion coefficient of Fe(CN)63-/4- redox couple, evaluated using the fabricated Au rotating disc electrode(rde) previously reported, was in good agreement with the existing data. Two experimental procedures, including the voltammetry at relatively low scan rates and the rde study, have been used in order to characterize the electrode kinetics. The electrode kinetics of some redox couples (FeEN2+-FeEN3+ and FeTA2+-FeTA3+) on both PB-modified thin films and bare Au electrode were studied using a Au rde. In all cases the rate constants of electron transfer obtained with the PB-modified film electrodes were only slightly less than those obtained for the same reaction on bare Au disc electrodes. The conductivities, as determined from the slopes of the i-V curves for a ca. 1 mm sample for dried PB-modified potassium-rich and deficient bulk samples pressed between graphite electrodes, were 6.21 × 10-7 and 2.03 × 10-7(Ω·cm)-1, respectively.

• 융합정보논문지
• /
• 제11권2호
• /
• pp.117-123
• /
• 2021

수계 아연 이온 전지의 신규 전극 활물질로서 헥사시아노 철산철(Fe4[Fe(CN6)]3, FeHCF)의 전기화학적 특성에 미치는 전해질 농도의 영향에 관하여 조사하였다. FeHCF 전극의 전기화학 반응 및 구조적 안정성에 전해질 농도가 크게 영향을 준다는 것이 전위 주사, 충전-방전 시험, X-선 회절 분석에 의해 확인되었다. 1.0-7.0 mol dm-3의 전해질 용액에서는 농도가 증가함에 따라 FeHCF 전극의 충전 및 방전 용량이 증가하였으나 사이클이 진행됨에 따라 서서히 감소하였다. 반면에 9.0 mol dm-3의 전해질 용액에서는 초기 용량은 상대적으로 작았으나 사이클 특성이 우수하였다. 전자의 전해질 용액에서 5사이클 진행된 FeHCF 전극은 반응 전과 비교하여 결정 구조에 변화가 있었으며, 후자의 경우에는 변화가 없었다. 이것은 FeHCF 전극의 전기화학적 성능이 전해질 용액 중에 존재하는 아연 이온의 수화 구조와 크게 관련이 있음을 시사하는 것이다.

• 대한환경공학회지
• /
• 제29권5호
• /
• pp.564-570
• /
• 2007

본 연구에서는 저전압 및 고전류에 의해 운전되는 수중 전기방전 기술을 이용하여 고농도(70,000 mg/L) 철(III)-에틸렌디아민테트라아세트산(Fe(III)-EDTA) 폐액을 처리하였다. 폐액내의 두 전극사이에 교류전압을 인가하면 폐액이 저항체의 역할을 하므로 전극주변 폐액의 온도가 빠르게 상승하며 동시에 전기화학반응에 의해 물이 분해되어 산소 및 수소 기체가 생성된다. 물의 기화 및 전기분해에 의해 생성된 기체가 전극주변을 감싸게 되면 이 기체층에서 강력한 전기방전이 일어난다. 과산화수소의 주입이 없을 때는 전기방전에 의해 약 50%의 Fe(III)-EDTA가 제거되었으며, 과산화수소 주입량이 증가됨에 따라 Fe(III)-EDTA 제거효율이 크게 증가하였다. 초기 Fe(III)-EDTA에 대한 과산화수소의 몰비가 24.7 이상일 때는 1 kWh의 에너지로 80 g 이상의 Fe(III)-EDTA를 제거할 수 있었다. 텅스텐 전극과 철전극을 비교한 결과 전극재질이 Fe(III)-EDTA 제거효율에 미치는 영향은 거의 없는 것으로 나타났다. 본 연구의 공정에서는 초기 Fe(III)-EDTA에 대한 과산화수소의 몰비가 24.7 이상일 때 30분 이내에 Fe(III)-EDTA 제거반응이 완료되었다.

• 동력기계공학회지
• /
• 제6권1호
• /
• pp.74-81
• /
• 2002

The characteristics of corrosion resistance for the surface of ductile cast iron(GCD40) by plasma nitriding process have been studied in terms of electrochemical polarization behaviors including corrosion potential($E_{corr}$), anodic polarization trends, polarization resistance($R_p$), and also have been studied microstructures, hardness and specific wear of nitrided layer Nitrided layer showed an enhanced hardness values in all the plasma nitriding condition investigated. In the result of wear test, specific wear of nitrided specimens were much decreased than that of non-treated specimens. In the results of XRD, ${\gamma}'phase\;and\;{\varepsilon}$ phase were detected in nitrided surface. And it was found that ${\varepsilon}$ phase was decreased and ${\gamma}'phase$ was increased respectively, as the nitriding time became longer. In the test of corrosion resistance, natural potentials in all the nitrided specimens were towards noble directions than in the case of non-treated specimens. The measurement of electrode potentials revealed that corrosion resistivity of plasma nitrided specimens were higher than in the case of the non-treated specimens.

• 조명전기설비학회논문지
• /
• 제23권1호
• /
• pp.36-40
• /
• 2009

콘크리트 전주는 배전선로 지지물로서 널리 사용되고 있다. 전주의 접지저항을 규정치 이내로 유지하기 위하여 동피복 접지봉을 포함한 여러 종류의 접지전극들이 사용되어 왔다. 전주 내부에는 철근이 들어있기 때문에 지중에 매설되는 전주 하단은 어느 정도 구조체접지극으로서 작용을 하게 된다. 본 논문에서는 전주 접지선으로 시험전류를 주입하면서 주입되는 전류와 금속 접지극으로 분류되는 전류를 각각 측정하였다. 이로써 전주 구조체로 분류되는 전류의 간접측정이 가능하였다. 측정결과에 근거하여 금속 접지극의 접지저항과 전주 구조체로 분류되는 전류크기 간의 상관관계를 분석하였다.

• 한국수소및신에너지학회논문집
• /
• 제10권3호
• /
• pp.185-189
• /
• 1999

Effects of alloy modification with the $Zr_{0.6}Ti_{0.4}V_{0.4}Ni_{1.2}Mn_{0.4}$ alloy for an electrode use have been investigated. For the alloy composition, a part of Mn was substituted by Co, Cr and Fe. The experimental results showed that Co accelerated activation of alloy, and Fe and Cr improved the discharge capacity. These results agree with P-C-T curves of each alloy. But substituting Fe for Mn showed the decrease of the discharge capacity when discharged at high rate (60mA, about 1C rate). Considering both the discharge capacity and the high rate discharge property, $Zr_{0.6}Ti_{0.4}V_{0.4}Ni_{1.2}Mn_{0.3}Cr_{0.1}$ alloy was found to be the best alloy among the alloys subjected to the test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.464-465
• /
• 2008

Concrete poles(CP) are popular supports for distribution lines. Various types of grounding electrode, such as copper-clad rods, have been used to maintain CP's ground resistance under the required value. The buried part of CP can also have structural grounding effect because of its iron reinforcing rods inside CPs. In this paper, we measured the total ground current injected into CP ground while measuring the ground current splitting to the metal electrode as well as the total injecting current. By this, it was able to measure the ground current splitting to CP structure. Based on the measured results, interrelationship between ground resistance of metal electrodes and current split factor to CP structure was analyzed.