• Journal of Electrochemical Science and Technology
• /
• v.9 no.3
• /
• pp.176-183
• /
• 2018

In this study, a $Li_2ZrO_3$ coated $Li[Ni_{0.8}Co_{0.15}Al_{0.05}]O_2$ (NCA) cathode was applied to an all-solid-state cell employing a sulfide-based solid electrolyte. Sulfide-based solid electrolytes are preferable for all-solid-state cells because of their high ionic conductivity and good softness and elasticity. However, sulfides are very reactive with oxide cathodes, and this reduces the stability of the cathode/electrolyte interface of all-solid-state cells. $Li_2ZrO_3$ is expected to be a suitable coating material for the cathode because it can suppress the undesirable reactions at the cathode/sulfide electrolyte interface because of its good stability and high ionic conductivity. Cells employing $Li_2ZrO_3$ coated NCA showed superior capacity to those employing pristine NCA. Analysis by X-ray photoelectron spectroscopy and electron energy loss spectroscopy confirmed that the $Li_2ZrO_3$ coating layer suppresses the propagation of S and P into the cathode and the reaction between the cathode and the sulfide solid electrolyte. These results show that $Li_2ZrO_3$ coating is promising for reducing undesirable side reactions at the cathode/electrolyte interface of all-solid-state-cells.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.2
• /
• pp.34-41
• /
• 2015

Recovered paper has been widely used as a main raw material of papermaking in Korea. Recycling of recovered paper helps to reduce production cost and preserve an environment. To recycle recovered paper efficiently, de-inking is a key process in recycling mills. De-inking process would be affected by various influencing factors such as the type of de-inking agent, mixed ratio of recovered paper, season, and process conditions. In this study, fatty acid and nonionic surfactant were used as the de-inking agent in froth-flotation process of mixed recovered paper. De-inking properties of mixed recovered paper were investigated according to the addition level of each chemical. Nonionic surfactant had a small effect on de-inking efficiency of mixed recovered paper due to decreased reject. As the additional level of fatty acid increases, fragmented ink particles increased and then optical properties of recycled paper decreased because fragmented ink particles adsorbed onto the fiber surface.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.55.1-55.1
• /
• 2011

Dye-sensitized solar cell(DSSC) have been considered one of the promising alternatives to conventional solar cells, because of their low cost, easy fabrication and relatively high energy conversion efficiency. However, although the cell offers reasonable efficiency at least 11%, the use of a liquid electrolyte placed technological challenges for achieving the desired durability and operational stability of the cell. In order to prevent or reduce electrolyte leakage considerable efforts have been made, such as p-type semiconductor or organic hole-transport material that better mechanical properties and simple fabrication processes. In this work, we synthesized solid-state electrolyte containing LiI and KI metal salt with starting materials of poly ethylene oxide to substitute liquid electrolyte enhance the ionic conductivity and solar conversion efficiency. Li+ leads to faster diffusion and higher efficiency and K+ leading to higher ionic conductivity. The efficiency of poly ethylene oxide/LiI system electrolyte is 1.47% and poly ethylene oxide/potassium electrolyte is 1.21%. An efficiency of 3.24% is achieved using solid-state electrolyte containing LiI and KI concentrations. The increased solar conversion efficiency is attributed to decreased crystallinity in the polymer that leads to enhanced charge transfer.

• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.248-259
• /
• 2014

Acceptor-doped cerium pyrophosphates have shown significant proton conductivity of > $10^{-2}Scm^{-1}$ in the range of $100-300^{\circ}C$ and are considered promising candidates for use as electrolytes in proton-conducting, ceramic electrolyte fuel cells (PCFCs). But, cerium pyrophosphates themselves do not have structural protons, and protons incorporate into their material bulk only as impurities on exposure to a hydrogen-containing atmosphere. However, proton incorporation and proton conduction in these materials are expected to be affected by factors such as the nature (ionic size and charge) and concentration of the aliovalent dopant, processing history (synthesis route and microstructure), and the presence of residual phosphorous phosphate ($P_mO_n$) phases. An exact understanding of these aspects has not yet been achieved, leading to large differences in the magnitude of proton conductivity of cerium pyrophosphates reported in various studies. Herein, we systematically address some of these aspects, and present an overview of factors affecting proton conductivity inacceptor-doped $CeP_2O_7$.

• Journal of Pharmaceutical Investigation
• /
• v.19 no.2
• /
• pp.99-107
• /
• 1989

In order to develop a pediatric liquid preparation with sustained release properties, dextromethorphan hydrobromide (DEXT) was complexed with strong cation exchange resin (CG 120) and the-complex was coated with Eudragit RS using a phase separation method by non-solvent addition. The effect of pH, ionic strength of the release medium and drug/resin ratio on the release rate of DEXT was studied. The release rate of free drug from the uncoated complex, and coated complexes with 9.5 and 18.5% Eudragit RS in artificial gastric juice were measured. The release rate from the uncoated complex was faster with higher pH, higher ionic strength of the release medium and higher drug/resin ratio. The release rate from the coated complex could be controlled by the amount of coating material, and the surface after release did not rupture into.

• Membrane and Water Treatment
• /
• v.2 no.2
• /
• pp.91-103
• /
• 2011

The flux behavior in the separation of equimolar bovine serum albumin (BSA) and bovine hemoglobin (HB) in aqueous solutions by cross-flow ultrafiltration (UF) was investigated, in which polyacylonitrile membrane with a molecular weight cut-off (MWCO) of 100 kDa was used. BSA and HB have comparable molar mass (67,000 vs. 68,000) but different isoelectric points (4.7 vs. 7.1). The effects of process variables including solution pH (6.5, 7.1, and 7.5), total protein concentration (1.48 and 7.40 ${\mu}M$), transmembrane pressure (69, 207, and 345 kPa), and solution ionic strength (with or without 0.01 M NaCl) on the separation were examined. It was shown that the ionic strength had a negligible effect on separation performance under the conditions studied. Although BSA and HB are not rigid bodies, the flux decline in the present cross-flow UF did not result from the mechanism of cake filtration with compression. In this regard, the specific cake resistance when pseudo steady-state was reached was evaluated and discussed.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.4122-4126
• /
• 2012

Cellulose-graft-poly (L-lactide) (cellulose-g-PLLA) was successfully prepared via ring-opening polymerization (ROP) by using 4-dimethylaminopyridine (DMAP) as an organic catalyst in an ionic liquid 1-allyl-3-methylimidazolium chloride (AmimCl). The structure and morphology of the polymer was characterized by nuclear magnetic resonance (NMR) and transmission electron microscope (TEM). From wide-angle X-ray powder diffraction (WAXD) and degradation test (by acid, alkaline, PBS and enzyme solution), changes in the crystalline structure as a result of degradation was also investigated. The results indicated that materials which have low degree of crystallinity showing higher degradability, however, in acid liquor, enzyme solution, alkaline liquor and PBS system, the degradation rate of the polymer decreased by the above sequence. Moreover, with the further increase of graft degree of this material, its degradation degree decreased.

• Journal of Electrochemical Science and Technology
• /
• v.12 no.2
• /
• pp.279-284
• /
• 2021

The high theoretical specific capacity of lithium-sulfur (Li-S) batteries makes them a more promising energy storage system than conventional lithium-ion batteries (LIBs). However, the slow kinetics of the electrochemical conversion reaction seriously hinders the utilization of Li-S as an active battery material and has prevented the successful application of Li-S cells. Therefore, exploration of alternatives that can overcome the sluggish electrochemical reaction is necessary to increase the performance of Li-S batteries. In this work, an ionic liquid (IL) is proposed as a functional additive to promote the electrochemical reactivity of the Li-S cell. The sluggish electrochemical reaction is mainly caused by precipitation of low-order polysulfide (l-PS) onto the positive electrode, so the IL is adopted as a solubilizer to remove the precipitated l-PS from the positive electrode to promote additional electron transfer reactions. The ILs effectively dissolve l-PS and greatly improve the electrochemical performance by allowing greater utilization of l-PS, which results in a higher initial specific capacity, together with a moderate retention rate. The results presented here confirmed that the use of an IL as an additive is quite effective at enhancing the overall performance of the Li-S cell and this understanding will enable the construction of highly efficient Li-S batteries.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.1
• /
• pp.9-27
• /
• 2021

As an example of research activities in decontamination for decommissioning, new data are presented on the options for corrosion layer dissolution during the decommissioning decontamination, or persulfate regeneration for decontamination solutions re-use. For the management of spent decontamination solutions, new method based on solvent extraction of radionuclides into ionic liquid followed by electrodeposition of the radionuclides has been developed. Fields of applications of composite inorganic-organic absorbers or solid extractants with polyacrylonitrile (PAN) binding matrix for the treatment of liquid radioactive waste are reviewed; a method for americium separation from the boric acid containing NPP evaporator concentrates based on the TODGA-PAN material is discussed in more detail. Performance of a model of radionuclide transport, developed and implemented within the GoldSim programming environment, for the safety studies of the LLW/ILW repository is demonstrated on the specific case of the Richard repository (Czech Republic). Continuation and even broadening of these activities are expected in connection with the approaching end of the lifespan of the first blocks of the Czech NPPs.

• Korean Journal of Materials Research
• /
• v.31 no.5
• /
• pp.272-277
• /
• 2021

Owing to its low cost, easy fabrication process, and good ionic properties, aqueous supercapacitors are under strong consideration as next-generation energy storage devices. However, the limitation of the current collector is its poor electrochemical stability, leading to low energy storage performance. Therefore, a reasonable design of the current collector and the acidic electrolyte is a necessary, as well as interfacial engineering to enhance the electrochemical performance. In the present study, graphite foil, with excellent electrochemical stability and good electrical properties, is suggested as a current collector of aqueous supercapacitors. This strategy results in excellent electrochemical performance, including a high specific capacitance of 215 F g^-1 at a current density of 0.1 A g^-1, a superior high-rate performance (104 F g^-1 at a current density of 20.0 A g^-1), and a remarkable cycling stability of 98 % at a current density of 10.0 A g^-1 after 9,000 cycles. The superior energy storage performance is mainly ascribed to the improved ionic diffusion ability during cycling.