• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.381-383
• /
• 2008

One of important factors responsible for image sticking in AC PDP is a sputtering of MgO layer under ionic bombardment. Sputtered Mg particles can migrate to the neighbor cells, where the migration makes a change of discharge condition. It leads to the local non-uniformity of a luminescence in the panel, resulting in the image sticking.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.4 s.112
• /
• pp.26-31
• /
• 2005

The purpose of this study was to confirm paper strengthening properties with recently commercialized polyvinylamine. Because of its high cationic charge density, polyvinylamine has been investigated as a size retention and surface coating aids. In this study, we tried to confirm polyvinylamine as wet-end additives to improve dry and wet strength using LBKP and BCTMP pulps. As a result, we found improvement of dry and wet tensile properties of polyvinylamine with BCTMP were much better than LBKP condition. This phenomena could be explained that ionic bonding of cationic charge of polyvinylamine with abundant anionic substances of BCTMP was a very important factor to improve dry and wet strength of paper.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.7
• /
• pp.1314-1320
• /
• 2001

Dyeing properties of rosemary colorants on wool fabrics were investigated. Reosemary colorants were characterized by UV and FT-IR analysis. Effect of dyeing condition on dye uptake and effect of mordanting on dye uptake, color change of colorfastness were explored. Rosemary colorants showed high affinity to wool fiber and its isotherm adsorption curve was Langmuir type. Therefore, it was considered that ionic bonding was involved in the adsorption of rosemary colorants to wool fiber. Rosemary colarants produced mainly yellowish color on wool fabric. The dyed wool fabrics showed generally high colorfastness except fastness to washing and light. Mordanting did not improve any colorfastness except that Sn mordant improved the light fastness. Bacterial reduction rate was increased up to 100% at 5% dye concentration. Therefore, antimicrobial activity of rosemary extract was confirmed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.2
• /
• pp.268-274
• /
• 2001

Dyeing properties of the colorants extracted from pomegranate hull on silk fabric were investigated. Pomegranate colorants were characterized by FT-IR analysis. Effects of dyeing condition and mordanting on dye uptake, color change and colorfastness were explored. Pomegranate colorants showed high affinity to silk fiber and its isotherm adsorption curve was Langmuir type. Therefore, ionic bond was involved in the adsorption of pomegranate colorants on to silk fiber. Mordants except Fe did not significantly increase dye adsorption. Pomegranate colorants produced mainly yellow color on silk fabric, but the silk mordanted with Fe showed yellow red color. Fastness to washing, perspiration, and rubbing was not improved by mordanting treatment, but light colorfastness was increased by Fe mordant.

• Fibers and Polymers
• /
• v.7 no.2
• /
• pp.95-104
• /
• 2006

In order to improve the water swelling, thermal/mechanical and adhesion properties of waterborne polyurethane (WBPU), a series of the crosslinkable WBPUs containing hydrophilic ionic component, dimethylol propionic acid (20 mole%), were prepared by in-situ polymerization using a cross-linker hexakis (methoxymethyl) melamine (HMMM). Effects of the HMMM content (2, 4, and 6 wt%) and curing temperature on these properties of the crosslinked WBPUs samples were investigated. All properties were found to increase with increasing HMMM content. It was found that the optimum curing temperature of the WBPU films and adhesives was near $120^{\circ}C$, which was not dependent on the HMMM content.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.3
• /
• pp.75-82
• /
• 1997

To improve the quality of coated paper, the continuous research to the coating components and development of alternative latices is required. Recently, amphoteric latex is getting a great concern due to their changable properties of surface charge through controlling pH and some methods have been tried to prepare amphoteric latices. This study was carried out to synthesize amphoteric latex using seeding polymerization method with low concentration emulsifier. Styrene was used as a main monomer in addition to acrylonitrile for a hydrophilic comonomer. acrylic acid for a anionic comonomer and N,N-dimethylaminoethyl methacrylate for a cationic comonomer. Particle size and viscosity of latex were greatly affected by addition of acrylic acid and ammonium persulfate as an initiator. Negative charge of latex in alkali condition was changed to zero to positive charge in around pH 4.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.320-320
• /
• 2010

The dye-sensitized solar cells (DSSCs) have achieved so far the highest validated efficiency over 11%. However, the cells with the best performance utilize volatile solvent as a electrolyte, which can cause some practical limitations for the long-term operation. This is one of the most substantial problems to be resolved for the commercialization of DSSCs. In order to improve the long-term stability, many research groups have reported new electrolyte system, to replace the liquid type electrolyte by non-volatile ones. In this work, we studied long-term stability of the DSSCs with various types of electrolytes such as (PVDF HFP) based polymer, eutectic melts of ionic liquids, and liquid based solvent. The cells with various electrolytes have been exposed to the condition under thermal stress and illumination over 1000 hours. We will report the change of photovoltaic properties with time and investigate the degradation mechanism with the impedance spectroscopic analysis.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12a
• /
• pp.342-344
• /
• 2011

본 논문에서는 최근에 주목 받고 있는 물질인 이온성액체를 실험실 규모로 제조하여 회분식 기-액흡수평형(VLE)장치를 이용하여 압력에 따른 이산화탄소 용해도 및 초기흡수속도를 상용 이온성액체인 PF6와.비교분석 하였다. 반응온도 $40^{\circ}C$조건에서 운전하였으며, 이산화탄소 압력 0~40기압 범위에서 수행되었다. 실험결과 [beim] ethyl sulfite 합성 이온성액체가 초기흡수속도에서 상용 이온성액체인 $PF_6$ 보다 높은 흡수력을 보였다.

• Journal of the Korean earth science society
• /
• v.42 no.5
• /
• pp.556-570
• /
• 2021

This study presents the data analysis results of groundwater chemistry and the occurrence of fluoride in groundwater obtained from the groundwater quality monitoring network of Korea. The groundwater data were collected from the National Groundwater Information Center and censored for erratic values and charge balance (±10%). From the geochemical graphs and various ionic ratios, it was observed that the Ca-HCO₃ type was predominant in Korean groundwater. In addition, water-rock interaction was identified as a key chemical process controlling groundwater chemistry, while precipitation and evaporation were found to be less important. According to a non-parametric trend test, at p=0.05, the concentration of fluoride in groundwater did not increase significantly and only 4.3% of the total groundwater exceeded the Korean drinking water standard of 1.5 mg/L. However, student t-tests revealed that the fluoride concentrations were closely associated with the lithologies of tuff, granite porphyry, and metamorphic rocks showing distinctively high levels. This study enhances our understanding of groundwater chemical composition and major controlling factors of fluoride occurrence and distribution in Korean groundwater.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.1
• /
• pp.60-68
• /
• 2015

The study of waste activated sludge (WAS) solubilization has been increased for sludge volume reduction and enhancing the efficiency of anaerobic digestion. Microwave (MW)-assisted solubilization is an effective method for the solubilization of WAS because this method can lead to thermal, nonthermal effect and ionic conduction by dielectric heating. In this study, the solubilization of WAS by MW heating and conductive heating (CH) was compared and to enhance the MW-assisted solubilization of WAS at low MW output power, chemical agents were applied such as $H_2SO_4$ as the strong acid and $CaCl_2$, NaCl as the ionic materials. Compared to the COD solubilization of WAS by CH, that by MW heating was approximately 1.4, 6.2 times higher at $50^{\circ}C$, $100^{\circ}C$, respectively and the highest COD solubilization of WAS was 10.0% in this study of low MW output power condition. At the same MW output power and reaction time in chemically agents assisted experiments, the COD solubilization of WAS were increased up to 18.1% and 12.7% with the addition of $H_2SO_4$ and NaCl, however, that with the addition of $CaCl_2$ was 10.7%. This result might be due to the fact that the precipitation reaction occurred by calcium ion ($Ca^{2+}$) and phosphate ion (${PO_4}^{3-}$) produced in WAS after MW-assisted solubilization. In this study, $H_2SO_4$ turned out to be the optimal agent for the enhancement of MW efficiency, the addition of 0.2 M $H_2SO_4$ was the most effective condition for MW-assisted WAS solubilization.