• 한국광물학회지
• /
• 제10권1호
• /
• pp.33-44
• /
• 1997

The reaction path of water-gneiss in 200m borehole at the Soorichi site of Yugu Myeon, Chungnam was simulated by the EQ3NR/EQ6 program. Mineral composition of borehole core and fracture-filling minerals, and chemical composition of groundwater was published by authors. In this study, chemical evolution of groundwater and formation of secondary minerals in water-gneiss system was modelled on the basis of published results. The surface water was used as a starting solution for reaction. Input parameters for modelling such as mineral assemblage and their volume percent, chemical composition of mineral phases, water/rock ratio reactive surface area, dissolution rates of mineral phases were determined by experimental measurement and model fit. EQ6 modelling of the reaction path in water-gneiss system has been carried out by a flow-centered flow through open system which can be considered as a suitable option for fracture flow of groundwater. The modelling results show that reaction time of 133 years is required to reach equilibrium state in water-gneiss system, and evolution of present groundwater will continue to pH 9.45 and higher na ion concentration. The secondary minerals formed from equeous phase are kaolinite, smectite, saponite, muscovite, mesolite, celadonite, microcline and calcite with uincreasing time. Modeling results are comparatively well fitted to pH and chemical composition of borehole groudwater, secondary minerals identified and tritium age of groundwater. The EQ6 modelling results are dependent on reliability of input parameters: water-rock ratio, effective reaction surface area and dissolution rates of mineral phases, which are difficult parameters to be measured.

• 대한환경공학회지
• /
• 제27권11호
• /
• pp.1180-1185
• /
• 2005

본 연구에서는 철이 주성분 이면서 다양한 금속산화물의 조성을 갖는 채광물질인 철광사(Iron Sand)를 구리 혹은 납을 함유한 합성폐수 처리에 대한 적용성을 조사하였다. 먼저 철광사의 내산성을 조사하기 위해 pH $2{\sim}4.5$ 범위에서 철 및 알루미늄의 용출특성을 조사였을 때, 가장 많은 조성을 갖는 철의 용출량은 강산성인 pH 2에서도 수질오염 배출기준 이하로 나타났다. 알루미늄의 경우 pH 2에서는 상당량의 용출현상이 나타났지만 pH 3 이상에서는 용출농도가 급격히 감소하였다. 이러한 내산성 실험결과는 철광사를 pH 3 이상에서의 폐수처리에 적용하는 데는 큰 문제가 없는 것을 제시한다. 철광사의 중금속 흡착능력을 조사하기 위해 구리 및 납을 흡착질로 사용하고 실험실 규모의 회분식 흡착실험과 칼럼 여과실험을 실시하였다. pH 5에서 철광사에 의한 구리이온의 제거는 반응초기 시간대에 빠르게 이루어졌으며 2시간이 경과되었을 때 구리 주입량의 50%가 제거되었으며 24시간 경과 후에 거의 완전한 흡착평형에 도달하였다. 철광사에 대한 Cu(II) 및 Pb(II)의 흡착은 pH 2 이상에서 증가되기 시작하였으며 pH 6 이상에서는 거의 모든 흡착질들이 제거되는 전형적인 양이온형 흡착경향을 보였다. 철광사에 대한 구리 및 납 흡착질의 농도비 변화에 따른 흡착등은 실험결과, 구리 및 납의 최대 흡착량은 각각 2,170 mg/kg 및 3,450 mg/kg으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제42권4호
• /
• pp.460-466
• /
• 2014

목탄을 이용한 미네랄수의 제조가능성을 알아보기 위해, 목탄의 무기성분 용출 및 수소이온농도 및 잔류염소흡착 성능을 조사하였다. 무기성분 용출은 탄화온도가 높아짐에 따라 칼륨의 경우 용출량이 높아지나, 나머지 무기성분들의 경우 차이가 적었다. 무기성분 용출량은 각 수종에서 칼륨이 가장 높은 값을 나타냈고 다음으로는 나트륨, 칼슘 순으로 나타났고, 수종 간에는 칼륨의 경우 활엽수인 굴참남무와 버즘나무가 침엽수인 소나무, 낙엽송 및 잣나무에 비하여 현저히 높게 나타났고, 나머지 무기성분은 수종간 칼륨만큼 큰 차이는 없었으나 칼륨과 같은 경향을 나타냈다. 수소이온농도는 활엽수인 버즘나무($600^{\circ}C$의 경우 pH 8.5)와 굴참남무(pH 8.4)가 높게 나타났고, 낙엽송(pH 7.8), 소나무(pH 7.2), 잣나무(pH 7.0)가 앞의 두 수종보다 낮은 값을 나타냈다. 염소제거량은 모든 수종에서 대조구보다 높은 제거량을 나타냈고, 침엽수인 잣나무와 소나무가 활엽수인 낙엽송, 버즘나무, 굴참나무보다 높은 제거율을 나타냈다. 분말목탄과 각형목탄 간 무기성분 용출량 및 수소이온농도에서 차이가 없으므로, 목탄을 이용한 미네랄수 제조에는 분말목탄보다 제조도 용이하고, 용출 후 처리도 용이한 각형목탄이 좋을 것으로 생각된다.

• 한국재료학회지
• /
• 제8권11호
• /
• pp.1011-1019
• /
• 1998

Pb의 환경오염 문제를 발생하지 않는 저농도 Pb 솔도합금을 개발하기 위하여, 새로운 Sn-5%Pb-1.5%Ag-x%In계 합금 조성을 설계하고, 이 합금의 융점, 젖음성, 상분석, 경도, 인장강도, 드로스성을 평가하여, Sn-37%Pb 솔더오 대체 가능성을 타진하였다. Sn-37%Pb 솔도 합금의 Pbdldhs 용출농도는 국제규제치인 3ppm보다 훨씬 적은 0.46ppm이었고, 환경문제를 유발하지 않는 것으로 확인되었다. 이 합금계의 융점은 $183-192^{\circ}C$이고, 응고온도범위도 $5^{\circ}C$내외로 매우 좁았다. 젖음성은 In의 첨가양에 따라 큰 차이가 거의 없었으며, Sn-375Pb와 비슷하였다. 융점 및 젖음성 측면에서 Sn-37%Pb와 대체 가능한 것으로 판단되었다. 경도는 Sn-37%Pb의 약 1.5배이고, 인장강도는 Sn-37%Pb의 것보다 높고, In의 첨가량에 따라 증가하였지만, 연신율은 감소하였다. In이 1% 첨가된 합금에서는 수지 상정 경계에 Ag3Sn과 Pb가 정출되고, 3% 이상에서는 $Ag_3Sn$과 $Ag_3In$ 및 Pb가 정출되었다. 드로스 생성속도는 Sn-37%Pb 합금이 Sn-5%Pb-1.5%Ag 합금보다 빠르고, In을 첨가할수록 느리고 2%의 In을 첨가한 합금은 180분에서도 거의 드로스가 발생하지 않았다.

• Journal of Pharmaceutical Investigation
• /
• 제25권3호
• /
• pp.249-264
• /
• 1995

Although liposome has many advantages as a pharmaceutical dosage form, its application in the industrial field has been limited because of some problems such as preparation method, reproducibility, scale-up, stability and sterilization etc. Liposomes prepared by microemulsification method had defined size, narrow size distribution, reproducibility and high entrapment efficiency. For enhancing the stability, the dry form of liposome was recommended. These types of liposome are proliposome and freeze-dried liposome. The liposome must have some properties for preparing of freeze-dried liposome; small size $(50{\sim}200\;nm)$, narrow size distribution and cryoprotectant. In this experiment, the liposomes containing 5-Fluorouracil(5-FU) and its prodrug(pentyl-5-FU-1-acetate; PFA, hexyl-5-FU-1-acetate; HFA) were made with soybean phosphatidylcholine, cholesterol, stearylamine(SA) and dicetyl phosphate(DCP) employing hydration method or microemulsification method using $Microfluidizer^{TM}$. Both or liposome types were MLV and MEL. After preparation, freeze drying and rehydration were performed. In the process of freezing, trehalose(Tr) was added as a cryoprotectant. Their evaluation methods were as follows; entrapment efficiency, mean particle size and size distribution, dissolution test, retain of entrapment efficiency and turbidity after freeze-drying. The results are summarized as belows. The entrapment efficiency of 5-FU was dependent on total lipid concentration and cholesterol content but that of PFA and HFA was decreased when cholesterol was added. When DCP and SA were added, entrapment efficiency was decreased. As the partition coefficient of drug was increased, entrapment efficiency was increased. Under the same condition, entrapment efficiency of MEL is similar to that of MLV. The mean particle size and size distribution of MEL were smaller than those of MLV. Dissolution rates of drug from both liposome types were comparatively similar. Dissolution rates of drugs with serum and liver homogenate were faster than without these material. After preparation of liposome, free drug was removed efficiency by Dowex 50W-X4. When liposome was freeze-dried and then rehydrated in the presence of Tr, characteristics of liposome were maintained well in MEL than MLV. Tr Was used successfully as a cryoprotectant in the process of freeze drying and the optimal ratio of Tr:Lipid was 4:1(g/g).

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.90.1-90.1
• /
• 2010

Due to the rapidly diminishing energy sources and higher energy production cost, the interest in dye-sensitized solar cells (DSSCs) has been increasing dramatically in recent years. A typical DSSC is constructed of wide band gap semiconductor electrode such as $TiO_2$ or ZnO that are anchored by light-harvesting sensitizer dyes and surrounded by a liquid electrolyte with a iodide ion/triiodide ion redox couple. DSSCs based on one-dimensional nano-structures, such as ZnO nanorods, have been recently attracting increasing attention due to their excellent electrical conductivity, high optical transmittance, diverse and abundant configurations, direct band gap, absence of toxicity, large exiton binding energy, etc. However, solar-to-electrical conversion performances of DSSCs composed of ZnO n-type photo electrode compared with that of $TiO_2$ are not satisfactory. An important reason for the low photovoltaic performance is the dissolution of $Zn^{2+}$ by the adsorption of acidic dye followed by the formation of agglomerates with dye molecules which could block the I-diffusion pathway into the dye molecule on the ZnO surface. In this paper, we prepared the DSSC with the ZnO electrode using the chemical bath deposition (CBD) method under low temperature condition (< $100^{\circ}C$). It was demonstrated that the ZnO seed layers played an important role on the formation of the ZnO nanostructures using CBD. To achieve truly low-temperature growth of the ZnO nanostructures on the substrates, a two-step method was developed and optimized in the present work. Firstly, ZnO seed layer was prepared on the FTO substrate through the spin-coating method. Secondly, the deposited ZnO seed substrate was immersed into an aqueous solution of 0.25M zinc nitrate hexahydrate and 0.25M hexamethylenetetramine at $90^{\circ}C$ for hydrothermal reaction several times.

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.583-589
• /
• 2010

In this paper, the properties of reclaimed ash(RA) from various domestic thermal power plants(S, D and H) were analyzed, and the possibility of fabricating the artificial lightweight aggregate(ALA) using RA was studied. The chemical compositions of RA are similar to the clay, but it had higher concentrations of alkali earth metal oxides(CaO, MgO) and unburned-carbon. The TCLP(Toxicity Characteristic Leaching Procedure) results showed that the dissolution concentrations of heavy metal ions of RA were below the limitation defined by the enforcement regulation of wastes management law in Korea. The results of IC analysis showed that leaching concentration of $Cl^-$ ion was 124 ppm for RA of HN and ${SO_4}^{2-}$ ion was leached a few hundreds ppm for all RA in this study. The ALAs with various mass ratio of clay to reclaimed ash(RA:Clay = 7:3, 6:4, 5:5, 4:6, 3:7) were sintered with a electric muffle furnace at the temperature of $1050{\sim}1200^{\circ}C$. The specific gravity and water absorption(%) of the sintered ALAs were 1.1~1.8 and 10~30% respectively. The ALA sintered in the rotary kiln at $1125^{\circ}C$ showed a bulk density of 1.7 and water absorption of 15.2%.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2006년도 총회 및 춘계학술발표회
• /
• pp.303-306
• /
• 2006

Using a variety of chemical geothermometers we estimate the temperature of a deep geothermal reservoir in relation to thermal groundwater in the Bugok area, southern Korea, in order to assess the potential use of geothermal energy in South Korea. Thermal water at Bugok has been exploited down to about 400 m below the land surface and shows the highest outflow temperatures (up to $78{\circ}C$) in South Korea. Based on the hydrochemical data and occurrence, groundwater in Bugok can be classified into three groups: $Na-SO_4$ type thermal groundwater (CTGW) occurring in the central part (about 0.24 $km^2$) $Ca-HCO_3$ type cold groundwater (SCGW) occurring in shallow peripheral parts of CTGW; and the intermediate type groundwater (STGW). CTGW waters are typical of thermal water in the area, because they have the highest outflow temperatures and contain very high concentrations of Na, K and $SiO_2$ due to the sufficient reaction with silicate minerals in deep reservoir. Their enriched $SO_4$ was likely formed by gypsum dissolution. The major ion composition of CTGW shows the general approach to a partial equilibrium state with rocks at depth. The application of various alkali ion geothermometers yields temperature estimates in the range of 88 to $198{\circ}C$ for the thermal reservoir. Multiple mineral equilibrium calculation indicates asimilar but narrower temperature range between about 100 and $155{\circ}C$. These temperature estimates are not significantly higher than the measured outflow temperatures for CTGW Considering the heat loss during the ascent- of thermal waters, this fact may suggest that a thermal reservoir in the study area is likely located at relatively shallow depths (possibly close to the depth of preexisting wells). Therefore, we suggest a high potential for geothermal energy development around the Bugok area in southern Korea.

• 한국세라믹학회지
• /
• 제45권11호
• /
• pp.734-738
• /
• 2008

Ettringite$(3CaO{\cdot}Al_2O_3{\cdot}3CaSO_4{\cdot}32H_2O)$, one of the hydrated phase of Portland cement is usually formed in the early stage of hydration by the reaction of tricalciumaluminate$(C_3A)$ and gypsum. The rapid and strong crystal growth of separated rod-shaped ettringite have been utilized for the preparation of special cements of rapid setting, high strength and non-shrinking properties. The ettringite also has been noticed as a promising materials for the immobilization of various waste ions because of its unique crystal structure which has abundant channels and exchangeable ionic compounds. In this study, the formation and growth behavior of the ettringite was investigated in the system $C_3A-CaSO_4-H_2O$ using $C_3A$ clinker and gypsum to obtain a microporous body for waste ion immobilization. Ettringite was revealed to form by the dissolution-precipitation mechanism and the bulk body was by the entangled growth of rod-shaped ettringite crystals. The hardened body was composed of nearly pure rod-shaped ettringite interlocked each other with adequate mechanical strength. The homogeneity of structure, pore size, specific surface area and porosity of the hardened body were influenced by reaction temperature, water/powder ratio and the curing time. The hardened body prepared with water/powder ratio of 1 at $24^{\circ}C$ for one day showed excellent morphological properties for the purposed materials.

• 자원리싸이클링
• /
• 제11권3호
• /
• pp.10-16
• /
• 2002

폐리튬이온전지로부터 추출한 $LiCoO_2$의 침출에서 황산, 질산과 같은 강산은 Co와 Li을 완전 용해시키므로 Co와 Li을 분리하여 회수하기 위해서는 별도의 공정이 필요하다. 낮은 pH에서 Co oxalate의 용해도가 낮다는 점을 착안한 oxalic acid 침출에서 양극활물질로부터 Co를 선택적으로 회수하는 연구를 수행하였다. 변수실험으로 도출된 최적조건, oxalic acid 3M, 침출온도 $80^{\circ}C$, 초기 광액농도 50g/L.의 조건에서 순수한 $LiCoO_2$를 침출한 결과, Li이 95% 이상 용해되는 반면에 Co는 1% 이하의 침출율을 나타내었다. 같은 침출조건에서 폐리튬이온전지로부터 선별한 양극활물질을 침출한 결과, Co와 Li의 침출율은 각각 0.25%, 99%로 높은 선택성을 보였다. 용액 중에 잔류하는 Li은 $Na_2$$CO_3$혹은 LiOH을 첨가하여 Li 탄산염 흑은 Li 수산화물의 형태로 회수할 수 있다.