• 한국환경농학회지
• /
• 제16권2호
• /
• pp.193-198
• /
• 1997

본 연구에서 얻을 수 있었던 결과를 요약하면 다음과 같다. 1. 황산이온 농도를 포함해 원수의 음이온 농도가 낮은 경우 질산이온을 효율적으로 제거하기 위해 사용가능한 수지는 일반적으로 사용되는 Type 1수지보다도 공극형태가 gel 형태인 Type 2수지를 사용하는 것이 적절할 것으로 판단된다. 그러나 음이온 농도가 높은 지하수나 빠른 유속으로 처리할 경우 공극형태가 macroporous인 것이 유리할 것으로 판단된다. 또한 원수의 항산이온 농도가 낮은 경우에는 같은 macroporous 형태의 수지라도 IRA-900 같은 일반 형태의 수지가 질산이온 선택성 수지보다도 효율이 좋은 것으로 나타났다. 2. Type 2 수지를 사용하여 얻은 자료로 동력학적 접근 방정식에 적용하여 얻은 결과를 다중희귀분석한 결과 다음과 같은 식을 도출할 수 있었다. $logq_0$=-0.14logV-0.148logH-1.04(r=0.99) logM=0.135logV+0.151logH+1.814(r=0.99) 3. 황산이온 농도가 다소 높은 지하수를 처리할 때는 일반형태인 IRA-900보다도 질산이온 선택성 수지인 IMAC HP-555 수지가 효율이 좋은 것으로 나타나 원수의 황산이온 농도가 50mg/l 이상일 경우에는 질산이온 선택성 수지를 사용하는 것이 바람직할 것으로 판단된다.

• 한국재료학회지
• /
• 제14권3호
• /
• pp.229-234
• /
• 2004

All the applications of natural zeolites make use of one or more of their physical and chemical properties: adsorption, ion-exchange and related molecular sieve properties, dehydration and rehydration, and siliceous composition. Accordingly, the applications of zeolite have been carried out in the various aspects because of its large cation exchange capacity and adsorption properties. In this paper, the adsorption effect of heavy metal ions in wastewater on zeolite mineral by batch adsorption process is studied. The amounts of adsorbed ions were variable by original pH and ionic concentration, especially original pH of solution had an important effect on the adsorption. In case of low pH solution, e.g. below 3.0, clinoptilolite adsorbed $Pb^{2+}$ ,$ Cd ^{2+ }$ , $Cu^{2+}$ and $Zn^{ 2+}$ , but mordenite almost did not adsorb except $Pb^{2+}$ . Under the same conditions, these ions were more adsorbed on clinoptilolite than on mordenite mineral. The velocity of adsorption was relatively fast and it was confirmed by shaking test that the equilibrium of adsorption could be attained in about one hour. The species of exchangeable cation of zeolite had an effect on its removing ability and zeolite of the sodium-exchanged type was the best.

• 한국표면공학회지
• /
• 제34권2호
• /
• pp.125-134
• /
• 2001

($Ti_{1-x}$ $Cr_{x}$ )N coatings were deposited by an ion-plating method in a reactor with two separate metal sources, Ti and Cr. Ti was evaporated using an electron beam, while Cr evaporation was carried out by resistant heating. The Ti and Cr concentrations in the coatings were controlled by the Ti and Cr evaporation ratio. The coating hardness increased with increasing the Cr content(x) and showed a maximum value of 6,000 HK at around x=0.8. The critical load of the coatings, measured by the scratch test, was around 30 N. The wear resistance properties of the ($Ti_{1-x}$$Cr_{ x}$)N coatings were evaluated using a CSEM pin-on-disk type tribometer. A Cr-steel ball as well as a SiC ball, which had hardness values of 590 HK and 2,600 HK respectively, were used as the pin. After the wear test, the surface morphology, roughness and the concentration of the coatings were investigated, with the main focus being on the effect of wear debris and the transferred layer on the wear behavior.

• 한국환경과학회지
• /
• 제9권2호
• /
• pp.165-171
• /
• 2000

A kinetic study for anion exchange was performed for commercially available Cl- type anion exchange resin in use to remove nitrate in water. The obtained results from the batch reactor were applied to the Langmuir and Freundlich models. The constants for Lagmuir model were qmax =29.82 and b=0.202, and for Freundlich model were K=5.509 and n=1.772. Langmuir model showed betterfit than Frendlich model for the experimental results. Ion exchange reaction rate was also calculated and the the approximate first-order reaction, rate constant k1 was 0.16 L/mg.hr. Effective diffusion coefficient was obtained in the range from $9.67$\times$10^{-8} cm^2/sec$ for initial concentration change, and from $6.09$\times$10^{-7} to 3.98$\times$10^{-6} cm^2/sec$ for reaction temperature change. Activation energy during the diffusion was calculated as 26 kcal/mol.

• The Korean Journal of Physiology and Pharmacology
• /
• 제15권4호
• /
• pp.195-201
• /
• 2011

The flavonoid quercetin is a low molecular weight compound generally found in apple, gingko, tomato, onion and other red-colored fruits and vegetables. Like other flavonoids, quercetin has diverse pharmacological actions. However, relatively little is known about the influence of quercetin effects in the regulation of ligand-gated ion channels. Previously, we reported that quercetin regulates subsets of nicotinic acetylcholine receptors such as ${\alpha}3{\beta}4$, ${\alpha}7$ and ${\alpha}9{\alpha}10$. Presently, we investigated the effects of quercetin on muscle-type of nicotinic acetylcholine receptor channel activity expressed in Xenopus oocytes after injection of cRNA encoding human fetal or adult muscle-type of nicotinic acetylcholine receptor subunits. Acetylcholine treatment elicited an inward peak current ($I_{ACh}$) in oocytes expressing both muscle-type of nicotinic acetylcholine receptors and co-treatment of quercetin with acetylcholine inhibited $I_{ACh}$. Pre-treatment of quercetin further inhibited $I_{ACh}$ in oocytes expressing adult and fetal muscle-type nicotinic acetylcholine receptors. The inhibition of $I_{ACh}$ by quercetin was reversible and concentration-dependent. The $IC_{50}$ of quercetin was $18.9{\pm}1.2{\mu}M$ in oocytes expressing adult muscle-type nicotinic acetylcholine receptor. The inhibition of $I_{ACh}$ by quercetin was voltage-independent and non-competitive. These results indicate that quercetin might regulate human muscle-type nicotinic acetylcholine receptor channel activity and that quercetin-mediated regulation of muscle-type nicotinic acetylcholine receptor might be coupled to regulation of neuromuscular junction activity.

• 조명전기설비학회논문지
• /
• 제15권1호
• /
• pp.70-77
• /
• 2001

본 논문에서는 고도정수처리설비에 활용되는 오존접촉조의 반응 특성을 퍼지 모델 형태로 표현하는 방법을 제안한다. 퍼지모델에 사용될 입력 및 출력 변수들은 오존처리의 목적과 정수장의 수질관리항목을 기준으로 선정하였다. 제안된 입력 변수들은 용존유기탄소농도, $UV_{254}$흡광도, 과망간산칼륨소비량, 주입오존농도, 수온 및 접촉시간이며, 출력변수들은 용존유기탄소농도, $UV_{254}$흡광도 및 과망간산칼륨소비량이다. 입력변수들에 대한 소속도 함수들은 삼각형 형태로 설계하였으며, 파이롯플랜트에서 취득한 조업데이터를 참고하여 소속도를 결정했다. 퍼지모델의 결론부는 선형식 형태로 설계하였으며, 선형식에 포함되는 상수들은 조업데이터를 이용하여 최소자승법으로 구했다. 또한 출력 변수들간에 상호 영향이 없다는 특성으로부터 전체 퍼지모델로을 각 변수별로 독립적인 기능을 갖는 3개의 부분 퍼지모델로 분할하여 설계함으로서 계산과 이해의 편리를 도모하였다. 모의실험을 통해 제안된 퍼지모델의 타당성을 확인해 본 결과, 모델의 튜닝시에 사용한 입력 데이터에 대해 퍼지모델의 출력이 조업데이터와 거의 동일함을 알 수 있었다.

• 전기화학회지
• /
• 제26권4호
• /
• pp.71-79
• /
• 2023

본 연구에서는 세공충진막 제조를 위해 활용되는 다공성 지지체의 친수화 처리를 위해서 음이온성, 양이온성, 비이온성 계면활성제를 사용하였으며, 계면활성제 종류, 농도 및 함침 시간에 따른 친수화 정도를 확인하였다. 또한 친수화 처리한 지지체를 이용하여 세공충진형 음이온교환막을 제조하고 이온전도도를 비교하여 최적의 친수화 조건을 선정하였다. 본 연구에서 사용한 이온성 계면활성제의 경우에는 함침 적용 농도가 3.0 wt% 이상일 때 함침 초기부터 다른 농도(0.05, 0.5 및 1.0 wt%)에 비해 급격하게 친수화가 진행되는 것을 관찰할 수 있었다. 그에 비해 분자량이 상대적으로 큰 비이온성 계면활성제의 경우는 친수화 진행이 원활하지 않은 것을 관찰할 수 있었다. 친수화 정도와 음이온교환막의 이온전도도와의 상관성이 나타나지 않았는데, 이러한 이유는 다공성 지지체의 친수화 공정 시 과도한 친수화 과정은 다공성 지지체의 소수 표면에 계면활성제가 과도하게 흡착하게 되어 기공률 감소가 커지게 되고 이를 통해 이온을 교환할 수 있는 고분자 전해질의 함량이 낮아지게 됨으로써 막의 전기적 저항을 크게 증가시키는 결과를 초래하게 되는 것으로 나타났다.

• Current Photovoltaic Research
• /
• 제2권3호
• /
• pp.120-123
• /
• 2014

Thermal doping method using furnace is generally used for solar-cell wafer doping. It takes a lot of time and high cost and use toxic gas. Generally selective emitter doping using laser, but laser is very high equipment and induce the wafer's structure damage. In this study, we apply atmospheric pressure plasma for solar-cell wafer doping. We fabricated that the atmospheric pressure plasma jet injected Ar gas is inputted a low frequency (1 kHz ~ 100 kHz). We used shallow doping wafers existing PSG (Phosphorus Silicate Glass) on the shallow doping CZ P-type wafer (120 ohm/square). SIMS (Secondary Ion Mass Spectroscopy) are used for measuring wafer doping depth and concentration of phosphorus. We check that wafer's surface is not changed after plasma doping and atmospheric pressure doping width is broaden by increase of plasma treatment time and current.

• 대한화학회지
• /
• 제38권10호
• /
• pp.705-709
• /
• 1994

1M 황산용액에서 세륨(Ⅳ) 이온에 의한 말론산의 산화반응에 관한 반응속도를 분광광도법으로 연구하였다. 말론산이 과량으로 존재하는 조건하에서 측정된 유사일차 속도상수, $k_{obs}$는 말론산의 농도, [MA]에 따라 크게 의존함을 보였으며 $k_{obs}$ = (0.592[MA])/(1+14.5[MA]$^2$)의 관계를 만족하였다. 이에 근거하여 반응메카니즘을 제안하였다. 말론산의 산해리에 의해 생성된 enolate형 음이온과 Ce(Ⅳ)간의 전자이동반응이 반응속도 결정단계이며, MA의 고농도하에서 Ce(Ⅳ)과 enolate형 음이온간의 1:2 chelate생성반응에 의하여 Ce(Ⅳ)의 농도가 감소하여 산화반응이 억제됨을 알 수 있었다. 본 연구에서 제안된 메카니즘에 근거하여 Sengupta 등에 의해 연구된 pH 의존성을 설명할 수 있었다.

• Geomechanics and Engineering
• /
• 제12권3호
• /
• pp.523-539
• /
• 2017

Clay soils are typical for their swelling properties upon absorption of water during rains and development of cracks during summer time owing to the profile desorption of water through the inter-connected soil pores by water vapour diffusion leading to evaporation. This type of unstable soil phenomenon by and large poses a serious threat to the strength and stability of structures when rest on such type of soils. Even as lime and cement are extensively used for stabilization of clay soils it has become imperative to find relatively cheaper alternative materials to bring out the desired properties within the clay soil domain. In the present era of catastrophic environmental degradation as a side effect to modernized manufacturing processes, industrialization and urbanization the creative idea would be treating the waste products in a beneficial way for reuse and recycling. Bottom ash and ecosand are construed as a waste product from cement industry. An optimal combination of bottom ash-eco sand can be thought of as a viable alternative to stabilize the clay soils by means of an effective dispersion dynamics associated with the inter connected network of pore spaces. A CATIA model was created and imported to ANSYS Fluent to study the dispersion dynamics. Ion migration from the bottom ash-ecosand pile was facilitated through natural formation of cracks in clay soil subjected to atmospheric conditions. Treated samples collected at different curing days from inner and outer zones at different depths were tested for, plasticity index, Unconfined Compressive Strength (UCS), free swell index, water content, Cation Exchange Capacity (CEC), pH and ion concentration to show the effectiveness of the method in improving the clay soil.