• Economic and Environmental Geology
• /
• v.35 no.4
• /
• pp.325-337
• /
• 2002

We examined the contamination of stream water and stream sediments by heavy metal elements with respect to distance from the abandoned Backun Au-Ag-Cu mine. High contents of heavy metals (Pb, Zn, Cu, Cd, Mn, and Fe) and aluminum in the waters connected with mining and associated deposits (dumps, tailings) reduce water quality. In the mining area, Ca and SO$_4$ are predominant cation and anion. The mining water is Ca-SO$_4$ type and is enriched in heavy metals resulted from the weathering of sulfide minerals. This mine drainage water is weakly acid or neutral (pH; 6.5-7.1) because of neutralizing effect by other alkali and alkaline earth elements. The effluent from the mine adit is also weakly acid or neutral, and contains elevated concentrations of most elements due to reactions with ore and gangue minerals in the deposit. The concentration of ions in the Backun mining water is high in the mine adit drainage water and steeply decreased award to down stream. Buffering process can be reasonably considered as a partial natural control of pollution, since the ion concentration becomes lower and the pH value becomes neutralized. In order to evaluate mobility and bioavailability of metals, sequential extraction was used for stream sediments into five operationally defined groups: exchangeable, bound to carbonates, bound to FeMn oxide, bound to organic matter, and residual. The residual fraction was the most abundant pool for Cu(2l-92%), Zn(28-89%) and Pb(23-94%). Almost sediments are low concentrated with Cd(2.7-52.8 mg/kg) than any other elements. But Cd dominate with non stable fraction (68-97%). Upper stream sediments are contaminated with Pb, and down area sediments are enriched with Zn. It is indicate high mobility of Zn and Cd.

• Journal of Food Hygiene and Safety
• /
• v.32 no.4
• /
• pp.290-297
• /
• 2017

The purpose of this study was developed for the determination of tridemorph in agricultural commodities samples. Tridemorph residues in samples were extracted with acetonitrile, partitioned with saline water, and then purified using and aminopropyl ($NH_2$) SPE catridge. The purified samples were quantified and confirmed via liquid chromatograph-tandem mass spectrometer (LC-MS/MS) in positive ion mode using multiple reaction monitoring (MRM). Matrix-matched calibration curves were linear over the calibration ranges (0.005~2.5 ng) into a blank extract with $r^2$ > 0.999. The limits of detection and quantification were 0.001 and 0.005 mg/kg, respectively. The average recovery ranged between 75.9% and 103.7% at different concentration levels (LOQ, 10 LOQ, 50 LOQ, n = 5) with relative standard deviations (RSDs) less than 9.0%. An interlaboratory study was conducted to validate the method by Korea Advanced Food Research Institute. The average recovery ranged between 87.0% and 109.2% at different concentration levels (LOQ, $10{\times}LOQ$, $50{\times}LOQ$, n = 5) with relative standard deviations (RSDs) less than 8.0%. All values were consistent with the criteria ranges requested in the Codex guidelines (CAC/GL40, 2003) and Food Safety Evaluation Department guidelines (2016). The results prove that the developed analytical methods is accurate, effective and sensitive for tridemorph determination.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.1-33
• /
• 1997

The objective of this study was to analyze the in vitro and in vivo corrosion products of low and high copper amalgams. The four different types of amalgam alloy used in this study were Fine cut, Caulk spherical, Dispersalloy, and Tytin. After each amalgam alloy and Hg were triturated according to the directions of the manufacturer by means of the mechanical amalgamator(Amalgam mixer. Shinhung Co. Korea), the triturated mass was inserted into a cylindrical metal mold which was 12mm in diameter and 10mm in height. The mass was condensed by 150Kg/cm compressive force. The specimen was removed from the mold and aged at room temperature for about seven days. The standard surface preparation was routinely carried out by emery paper polishing under running water. In vitro amalgam specimens were potentiostatically polarized ten times in a normal saline solution at $37^{\circ}C$(potentiostat : HA-301. Hukuto Denko Corp. Japan). Each specimen was subjected to anodic polarization scan within the potential range -1700mV to+400mV(SCE). After corrosion tests, anodic polarization curves and corrosion potentials were obtained. The amount of component elements dissolved from amalgams into solution was measured three times by ICP AES(Inductive Coupled Plasma Atomic Emission Spectrometry: Plasma 40. Perkim Elmer Co. U.S.A.). The four different types of amalgam were filled in occlusal and buccal class I cavities of four human 3rd molars. After about five years the restorations were carefully removed after tooth extraction to preserve the structural details including the deteriorated margins. The occlusal surface, amalgam-tooth interface and the fractured surface of in vivo amalgam corrosion products were analyzed. In vivo and in vitro amalgam specimens were examined and analyzed metallographically by SEM(Scanning Electron Microscope: JSM 840. Jeol Co. Japan) and EDAX(Energy Dispersive Micro X-ray Analyser: JSM 840. Jeol Co. Japan). 1. The following results are obtained from in vitro corrosion tests. 1) Corrosion potentials of all amalgams became more noble after ten times passing through the in vitro corrosion test compared to first time. 2) After times through the test, released Cu concentration in saline solution was almost equal but highest in Fine cut. Ag and Hg ion concentration was highest in Caulk spherical and Sn was highest in Dispersalloy. 3) Analyses of surface corrosion products in vitro reveal the following results. a)The corroded surface of Caulk spherical has Na-Sn-Cl containing clusters of $5{\mu}m$ needle-like crystals and oval shapes of Sn-Cl phase, polyhedral Sn oxide phase. b)In Fine cut, there appeared to be a large Sn containing phase, surrounded by many Cu-Sn phases of $1{\mu}m$ granular shapes. c)Dispersalloy was covered by a thick reticular layer which contained Zn-Cl phase. d)In Tytin, a very thin, corroded layer had formed with irregularly growing Sn-Cl phases that looked like a stack of plates. 2. The following results are obtained by an analysis of in vivo amalgam corrosion products. 1) Occlusal surfaces of all amalgams were covered by thick amorphous layers containing Ca-P elements which were abraded by occlusal force. 2) In tooth-amalgam interface, Ca-P containing products were examined in all amalgams but were most clearly seen in low copper amalgams. 3) Sn oxide appeared as a polyhedral shape in internal space in Caulk spherical and Fine cut. 4) Apical pyramidal shaped Sn oxide and curved plate-like Sn-Cl phases resulted in Dispersalloy. 5) In Tytin, Sn oxide and Sn hydroxide were not seen but polyhedral Ag-Hg phase crystal appeared in internal space which assumed a ${\beta}_l$ phase.

• Applied Biological Chemistry
• /
• v.39 no.6
• /
• pp.494-500
• /
• 1996

Uptake of hen metal ions by water dropwort (Oenanthe stolonifera DC.) and its cadmium-binding protein were studied to probe for good method to remove heavy metal contaminants from environments. The plant was cultured in the culture medium (pH 7.0) containing the various concentrations of $Cd^{2+}$, $Cr^{3+}$ or $Pb^{2+}$, for 3 and 7 days. The residual heavy metals deposited in roots linearly increased as the metal ions concentration increased up to 17 ppm for $Cd^{2+}$, 20 ppm for $Cr^{3+}$ and 50 ppm for $Pb^{2+}$. Above these concentrations, the plant growth was inhibited and the uptake rates of the metal ions decreased. The heavy metals absorbed by the plant were mostly deposited in roots. In particular, the residual concentration of lead in roots was about four times higher than those of cadmium and chromium. When cultured in the medium containing 20 ppm of each metal ion, 80% of cadmium, 90% of cromium and 96% of lead were deposited in roots out of the total residual metal ions in the plant. These values correspond to 6.1 mg of cadmium, 5.2 mg of chromium and 23.6 mg of lead per one gram of roots tissue on a dry weight basis. A cadmium-binding protein was partially purified by extraction, gel filtration and DEAE-Cellulose chromatography from water dropworts that was grown in the medium containing 20 ppm $Cd^{2+}$. The purified protein was a single band on SDS- and non-denaturing- polyacrylamide gel electrophoresis. Its molecular mass was estimated to be ca. 5,000 dalton by gel filteration. Analysis of amino acid composition of the protein indicated that it had a typical amino acid composition of heavy metal-binding protein in that it contained 27% of acidic amino acids and 9.9% of cysteine. However, it is likely that the protein is a new plant metal-binding protein, since its amino acid composition is somewhat different from those of phytochelatins that have been known so far.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.2
• /
• pp.60-66
• /
• 2005

When external pressure higher than osmosis pressure is reversely derived into solution, its solvent is moved into the solution having lower concentration, which is called 'reverse osmosis'. We investigated the desalination application of deep ocean water using reverse osmosis pressure of $40-70\;kgf/cm^2$ We observed how to operational factor j like flow rate, water temperature and pressure have effect on efficiency of reverse osmosis membrane and salts rejection. Fluxes of reverse osmosis membrane are directly proportional to water temperature and pressure. However, salts rejection rates are positively correlated with pressure and inversely proportional to water temperature. Separation efficiencies of osmosis membrane for major elements such as $Mg^{2+},\;Ca^{+2},\;Na^+\;and\;K^+$ are as follows in a strong electrolysis solution like seawater; $Ca^{2+},\;Mg^{2+}>K^+>Na^+$. Rejection rates of $Mg^{2+}\;and\;Ca^{2+}$ that have high electric charges are over 99% and show positively correlation with water temperature. Rejection rates of $Na^+$ having low electric charge is observed to be 98%-99%, which rates is much lower than those of $2^+$ charged ions like $Ca^{2+}\;and\;Mg^{2+}$. Ion rejection rates of boron, B, are much low because boron is present il free state or gas phase in seawater. Boron concentration in desalination water is over criteria of Korean drinking water, 0.3 mg/L. However, we could satisfied with the criteria of drinking water under the operation condition like temperature $5^{\circ}C$ and pressure $70kgf/cm^2$, using the relationship that rejection rates of boron is proportional to pressure and is inversely proportional to water temperature

• Food Science and Preservation
• /
• v.21 no.2
• /
• pp.193-198
• /
• 2014

The quality and antioxidative characteristics of drinks prepared with different mixing ratios of black garlic and Oenanthe javanica DC., BD-1 (black garlic only), BD-2 (black garlic:Oenanthe javanica DC.=2:1), BD-3 (black garlic:Oenanthe javanica DC.=1:1), and BD-4 (black garlic:Oenanthe javanica DC.=1:2), were studied. The pH increased with the increasing concentration of Oenanthe javanica DC. extract in all the tested drinks, but the sugar contents decreased. The total polyphenol contents of the drinks were 28.48 ${\mu}g/mL$ (BD-1), 41.91 ${\mu}g/mL$ (BD-2), 42.36 ${\mu}g/mL$ (BD-3), and 46.96 ${\mu}g/mL$ (BD-4). The SOD-like activity was highest for BD-4 (18.60%), followed by BD-3 (15.53%), BD-2 (12.53%), and BD-1 (10.27%). The thiobarbituric acid reactive substances (TBARS) was highest for BD-4 (52.51%), followed by BD-3 (45.70%), BD-2 (39.44%), and BD-1 (28.72%). The ferrous ion chelating activity increased with the increasing concentration of Oenanthe javanica DC extract, and BD-4 showed the best activities among all the tested drinks. The water-soluble vitamin content (vitamins B1, B2, B6, and C) of BD-4 (1197.77 ${\mu}g/mL$) was higher than those of the other drinks (BD-1, 213.02 ${\mu}g/mL$; BD-2, 477.87 ${\mu}g/mL$; BD-3, 914.72 ${\mu}g/mL$), and the vitamin C (806.21 ${\mu}g/mL$) content of the water-soluble vitamins at BD-4 was higher than those of vitamins B1 (68.04 ${\mu}g/mL$), B2 (312.51 ${\mu}g/mL$), and B6 (11.01 ${\mu}g/mL$). BD-4 showed the best score in the sensory evaluations, such as in the evaluation of the color, flavor, taste, and overall acceptability.

• The Korean Journal of Mycology
• /
• v.12 no.4
• /
• pp.133-140
• /
• 1984

Some properties of cellulolytic enzymes produced by Pleurotus sajor-caju JAFM 1017 during its growth in synthetic medium were investigated. The optimum pH of avicelase, CMCase, and ${\beta}-glucosidase$ was pH 5.5, pH 4.5 and pH 6.0, respectively. Avicelase and CMCase were stable within pH 5.0 to 6.0 and 4.0 to 6.0, respectively, and ,${\beta}-glucosidase$ was within pH 5.5 to 6.5. The optimum temperature of avicelase, CMCase and ${\beta}-glucosidase$ was the same of $40^{\circ}C$. The enzymes were stable below the optimum temperature, but the enzymes were unstable over the temperature of $50^{\circ}C$, and avicelase was losing about 91.7% of activity at $70^{\circ}C$ for 10 min. The enzyme activity of avicelase and CMCase was increased in proportion to the substrate concentration within 1% and 0.7%, respectively, and ${\beta}-glucosidase$ was within 0.1%. The Michaelis constants (Km) of avicelase and CMCase were 30.77mg avicel/ml and 14.64m Na-CMC/ml, respectively and ${\beta}-glucosidase$ was 5. 13mg salicin/ml. The reducing sugar production of avicelase was proportionaly increased until 120 min. and CMCase and ${\beta}-glucosidase$ were until 60min. The activity of three cellulolytic enzymes were increased by $Ca^{2+}$ at the concentration of $10^{-2}M$, but were inhibited by $Hg^{2+}$, $Ag^+$.

• Korean Journal of Animal Reproduction
• /
• v.15 no.1
• /
• pp.7-13
• /
• 1991

This study was carried out to investigate the effects of pH of sperm-washing solution, sperm-washing frequency and individual bull on concentration of hydrogen ion in sperm-washed solution and sperm acrosome reaction. The results obtained were as follow. 1. When bovine sperm was washed at 4 times with SHP solution and incubated, the difference of light absorbance between sperm-washing and sperm-washed solution(${\Delta}$Ao-${\Delta}$At) was higher in 2nd sperm-washed solution than that in the other washed solutions. 2. When sperm was thrice washed with SHP solutions of pH 5.99, 6.38, 6.78, 7.10, 7.40, 7.69, 8.15, 8.45, and 8.83, ${\Delta}$Ao-${\Delta}$At was significantly increased at pH7.69 to 8.83, and ${\Delta}$Ao-${\Delta}$At in 1st sperm washed solution was significantly higher than that in 2nd and 3rd sperm washed solution. 3. When sperm of Holstein, KNC and Hereford was thrice washed with SHP solutions of pH 5.99, 6.38, 6.78, 7.10, 7.40, 7.69, 8.15, 8.45, and 8.83, Holstein showed higher ${\Delta}$Ao-${\Delta}$At of sperm Washed solution than KNC and Hereford, and ${\Delta}$Ao-${\Delta}$At in sperm washed solution was significantly increased at 7.69 for Holstein and at 8.15 for KNC and Hereford, respectively. 4. When sperm was thrice with SHP solution of pH 6.8, 7.1 and 7.4, and then incubated in mTALP of pH 7.4 for 15 minutes, in 1st and 2nd sperm washing ${\Delta}$Ao-${\Delta}$At of sperm washed solution was significantly higher at pH 7.1 and 7.4 than at pH 6.8, and the sperm acrosome reaction of pH 6.8, 7.1 and 7.4 was 49.1, 68.8 and 72.9%, respectively. The sperm acrosome reaction of pH 7.1 and 7.4 was higher than that of pH 6.8.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.1
• /
• pp.8-14
• /
• 2006

High phosphate accumulations in greenhouse soils have been considered as a new agricultural problem in Korea. The effects of silicate on changes in phosphate fractions and on the yield of Chinese cabbage without P fertilization were investigated by pot experiment. For this experiment, P-accumulated soil was selected (Total-P; $2140mg\;kg^{-1}$). Three levels of silicate (0, 2, and $4Mg\;ha^{-1}$) without P fertilization and P fertilizer without silicate application (Si0+NPK) were applied in 1/2000a pots. The same amount of nitrogen and potassium fertilizers were applied to the all pots. The application of $4Mg\;ha^{-1}$ of silicate greatly increased the yield of Chinese cabbage by 25% compared to Si0+NPK treatment. Although there is no significant difference in plant P absorption among all the treatments, the uptake of P in the $4Mg\;ha^{-1}$ silicate application was significantly higher than Si0+NPK treatment due to increase in yield. The content of available $SiO_2$ in soil increased with increasing silicate application rates. The Si concentration of plant showed a positive correlation with available $SiO_2$ contents in soil and the yield of Chinese cabbage. Total P greatly decreased with increasing rates of silicate application, yet the change in available P content was not significant. The Si0+NPK treatment increased the content of Ca-P by 11%, however, which was decreased by 27% in the $4Mg\;ha^{-1}$ silicate application. Therefore, the effect of silicate on reducing total-P was mainly attributed to the change in concentration of Ca-P. Our results suggest that the application of silicate in P-accumulated soils not only increase the crops yield but also reduces phosphate accumulation.

• Journal of Wetlands Research
• /
• v.23 no.4
• /
• pp.352-363
• /
• 2021

The purpose of this study was to evaluate the load of nutrients contained in the drainage discharged from the facility horticultural complex and to use them for re-use of fluids and design for introduction of water treatment plants. Representative hydroponic cultivation crops were selected as tomato, paprika, cucumber, and strawberry, and the total number of samples analyzed for water quality was 80. As a result of the analysis, since various fertilizer components such as N, P, K⁺, Na⁺, Mg²⁺, Ca²⁺, Si₄⁺, HCO₃^-, Cl^-, S^2-, Fe, Mn, Cu, Zn, Mo and B are contained at very high concentrations in the drainage, the need for water treatment was confirmed. Through statistical analysis, it was analyzed that the drainage concentration of strawberries was lower than that of tomatoes, paprika, and cucumbers. In the case of tomatoes, these essential ion concentrations are the highest, so it was confirmed that they are subject to valuable resources in terms of reuse of fertilizers. The load of N and P of the drainage discharged from the facility horticultural complex 1m² was analyzed. For N, the daily processing capacity of 4.0 kg of tomatoes, 3.3 kg of paprika, 3.0 kg of cucumbers, and 1.5 kg of strawberries was calculated based on 1 ha. It was suggested that the P concentration needs a scale and capacity that can handle 0.5 kg of tomatoes, 0.6 kg of paprika, 0.4 kg of cucumber, and 0.2 kg of strawberries per day. Through this study, the amount of nitrogen and phosphorus contained in the drainage discharged from the greenhouse of each crop was evaluated to analyze the economy. In addition, it was expected to be used as basic data that can be used to calculate the treatment capacity to be reflected when introducing water treatment facilities in facility horticultural complexes for sustainable agriculture.