• Journal of Technology Innovation
• /
• v.23 no.3
• /
• pp.169-199
• /
• 2015

Information and communication technologies (ICT) have been combined with products from other industries to provide new functionality, as recently shown in the cases of Internet of Things (IoT). Modularity assumes a crucial role in such technological convergence, and has impacts on the relationship between organizations as well as competition within an industry. Interface standards, which ensure the connectivity between modules, serve as a critical factor in the process by which modularity affects organization systems and industry structure. To understand the aforementioned phenomenon, we studied modularity and interface standards with a focus on the interaction between technology and organization systems and subsequent changes in industrial dynamics. This paper examines previous literature on modularity and interface standards in the aspects of product architecture, organization systems, and institutional factors. With this analytical framework, we conducted a comparative analysis of electronic and automotive industries to derive implications for standardization policy. This research has shown the significance of external open interface standards in shaping an industrial landscape where a variety of module producers horizontally compete. It also advises that policymakers take into account product characteristics, engagement of leading firms in an industry, and institutional factors such as WTO law in the design of standardization policy.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.5
• /
• pp.310-318
• /
• 2016

Emerging technologies such as the Internet of Things (IoT) and the Advanced Driver Assistant System (ADAS) often have image transmission functions with tough constraints, like low power and/or low delay, which require that they adopt line-based, low memory compression methods instead of existing frame-based image compression standards. Bit rate control in the conventional frame-based compression systems requires a lot of hardware resources when the scope of handled data falls at the frame level. On the other hand, attempts to reduce the heavy hardware resource requirement by focusing on line-level processing yield uneven image quality through the frame. In this paper, we propose a bit rate control that maintains consistency in image quality through the frame and improves the legibility of text regions. To find the line characteristics, the proposed bit rate control tests each line for ease of compression and the existence of text. Experiments on the proposed bit rate control show peak signal-to-noise ratios (PSNRs) similar to those of conventional bit rate controls, but with the use of significantly fewer hardware resources.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.6
• /
• pp.910-915
• /
• 2018

The precise time, which is an essential element of the Global Navigation Satellite System (GNSS), such as US GPS, GLONASS in Russia, Galileo in Europe, and Beidou in China, is an important foundation for various economic activities around the world. Communication systems, power grids, IoT, Cloud computing and financial networks operate based on the precise time not only for the operating principles, but also for the synchronization and operational efficiency between tasks. In this paper, we introduce the Atomium software for the first time in South Korea. Atomium was developed by ORB in Belgium to calculate the clock error(clock solution) with GNSS signal observation data based on PPP method. The observation data is provided by Korea Research Institute of Standards and Science(KRISS). The results of MJD57106 with Atomium software are presented.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.2
• /
• pp.480-497
• /
• 2012

As a new business concept, machine-to-machine (M2M) communications are born from original telemetry technology with the intrinsic features of automatic data transmissions and measurement from remote sources typically by cable or radio. M2M includes a number of technologies that need to be combined in a compatible manner to enable its deployment over a broad market of consumer electronics. In order to provide better understanding for this emerging concept, the correlations among M2M, wireless sensor networks, cyber-physical systems (CPS), and internet of things are first analyzed in this paper. Then, the basic M2M architecture is introduced and the key elements of the architecture are presented. Furthermore, the progress of global M2M standardization is reviewed, and some representative applications (i.e., smart home, smart grid and health care) are given to show that the M2M technologies are gradually utilized to benefit people's life. Finally, a novel M2M system integrating intelligent road with unmanned vehicle is proposed in the form of CPS, and an example of cyber-transportation systems for improving road safety and efficiency are introduced.

• Journal of the Korea Convergence Society
• /
• v.8 no.9
• /
• pp.25-30
• /
• 2017

The Connected House is a new type of IT convergence service that combines new communication services with existing IT systems such as M2M, NFC, smart home, and smart grid. It is a future connected life service that connects to any device anytime, anywhere. In this paper, we designed an intelligent gateway, a connected office solution for the Internet of things, which provides a connected life service for the future, and can control various sensors, ZigBee/Z-Wave/NFC and terminal devices. In addition, IP/SIP/IMS cameras and video door phones that are linked to the gateway have been developed to satisfy the quality standards of domestic communication service providers in terms of voice quality, jitter, and frame rate.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.249-254
• /
• 2017

This paper presents an assessment system of safety level of 22.9kV grade high voltage electrical facilities considering environmental factors. The assessment system was developed based on the following procedure. Firstly, assessment structure was determined by consulting standards regarding inspection and diagnosis of electrical facilities. Secondly, contents of items and sub items of assessment system were developed. Thirdly, in order to quantify the importance of the assessment system, the weight was calculated using Analytic Hierarchy Process(AHP). Lastly, assessment table of safety level was developed including environmental factors such as period of use and load factor. The developed system can evaluate the safety level of high voltage facilities in an objective way. Therefore it can be applicable to electrical safety management system based on Internet of Things(IoT).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.10
• /
• pp.1460-1468
• /
• 2015

As the number of IoT service increases, the interest of lightweight block cipher algorithm, which consists of simple operations with low-power and high speed, is growing. LEA(Leightweight Encryption Algorithm) is recently adopted as one of lightweight encryption standards in Korea. In this paper a pipeline LEA architecture is proposed to process large amounts of data with high throughput. The proposed pipeline LEA can communicate with external modules in the 32-bit I/O interface. It consists of input, output and encryption pipeline stages which take 4 cycles using a muti-cycle pipeline technique. The experimental results showed that the proposed pipeline LEA achieved more than 7.5 Gbps even though the key length was varied. Compared with the previous high speed LEA in accordance with key length of 128, 192, and 256 bits, the throughput of the pipeline LEA was improved 6.45, 7.52, and 8.6 times. Also the throughput per area was improved 2, 1.82, and 2.1 times better than the previous one.

• Journal of Biomedical Engineering Research
• /
• v.44 no.2
• /
• pp.99-108
• /
• 2023

According to the COVID-19, development of various medical software based on IoT(Internet of Things) was accelerated. Especially, interest in a central software system that can remotely monitor and control ventilators is increasing to solve problems related to the continuous increase in severe COVID-19 patients. Since medical device software is closely related to human life, this study aims to develop central monitoring system that can remotely monitor and control multiple ventilators in compliance with medical device software development standards and to verify performance of system. In addition, to ensure the safety and reliability of this central monitoring system, this study also specifies risk management requirements that can identify hazardous situations and evaluate potential hazards and confirms the implementation of cybersecurity to protect against potential cyber threats, which can have serious consequences for patient safety. As a result, we obtained medical device software manufacturing certificates from MFDS(Ministry of Food and Drug Safety) through technical documents about performance verification, risk management and cybersecurity application.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.1
• /
• pp.47-55
• /
• 2016

As one of recent issues in the information and communication industry, internet of things has attracted attention to provide intelligent infrastructure services which connect and share data and information between real and virtual world. According to the development of these internet of things technologies, types of machines, telecommunication devices, and terminals are increasing tremendously. In this situation, connectivity and interoperability between internet of things components are important issues to build a hyper connected society. To visualize this society, it is important to set up and develop information and communication technology (ICT) standards among stakeholders. However, under limited budget and human resources, it is essential to rank standardization work items for setting standards with respect to efficiency. The purpose of this study is to provide a method for setting standardization strategies within group decision making. As a multi-criteria group decision making tool, analytic hierarchy process (AHP) is adopted and applied to determine the priorities of setting work items. The proposed method first defines decision making problem with objective, criteria, and alternatives which produces a hierarchy consisting of upper and lower criteria. Then, pairwise comparisons of academy and public sector experts are performed with respect to their relative meaning and importance. Individual surveys of expert groups are collected and summarized to determine relative criteria importance measures. Furthermore, to deliver reliable importance criteria measures, differences between academy and public sector expert groups are compared and tested using Mann-Whitney non-parametric test. The results are illustrated for useful guidelines to practical group decision making in standardization strategy establishments.

• Journal of Internet of Things and Convergence
• /
• v.7 no.3
• /
• pp.9-14
• /
• 2021

This paper discovers the energy loss factors through the insulation diagnosis of houses or buildings, and proposes directions for energy efficiency improvement. The energy efficiency factor of a building consists of insulation diagnosis, thermal bridge diagnosis, window diagnosis, airtight diagnosis, and equipment diagnosis. Among the residents and facilities in the energy welfare blind spot, an energy efficiency diagnosis was conducted for one senior citizen building located in Naju-si, Jeollanam-do, and energy efficiency diagnosis was conducted after insulation was installed. Energy measurement, diagnosis and analysis were performed using the IoT-based integrated wired/wireless energy diagnosis platform, Energy Finder. As a result of comparison, an overall energy saving rate of 16.38% was achieved. Annual heating energy consumption per unit area decreased from 333.51kWh before construction to 277.35kWh after construction, and annual cooling energy consumption per unit area decreased from 5.51kWh before construction to 5.22kWh after construction. The annual primary energy consumption per unit area decreased from 464.52kWh before construction to 403.69kWh after construction, and the annual energy cost was reduced from 3,063,307.14 won before construction to 2,641,072.49 won after construction. The additional improvement work is needed on the standards affecting energy efficiency other than insulation.