• Proceedings of the KIEE Conference
• /
• 2001.07e
• /
• pp.108-112
• /
• 2001

Vector control schemes are used in inverter-fed induction motor drives to obtain high performance. Crucial to the success of the vector control scheme is the knowledge of the instantaneous position of the rotor flux. However, the position of the rotor flux change with temperature and magnetic saturation of the motor. This variation cause deterioration of both steady state and dynamic operation of the motor drives. Performance degradation is in the form of input-output torque nonlinearity and saturation of the motor. Analytic expressions are derived to evaluate the effects due to parameter sensitivity.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1892-1896
• /
• 2008

Inverter-fed induction motors (IFM) are prevalent in traction vehicles. However, the winding insulation of IFM is substantially more stressed than of line-powered motors by surge voltages. Consequently, the winding insulation of IFM should be estimated by surge voltages. Also, the weakness of coil insulation can be detected by the surge voltage test. This paper described the insulation evaluation of induction motors by application of surge voltages. A surge voltage generator with the maximum voltage of 5 kV and the selectable rise-time in ranges of $50\;ns\;{\sim}\;500\;ns$ was fabricated. In the experiment, we applied surge voltages into induction motors with the magnitude and the risetime according to IEEE 522. By the analysis of applied surge voltage and current waveforms, we could find difference between normal and defection windings.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.316-320
• /
• 2008

This paper described the design and fabrication of a series arc detection module to monitor electrical insulation in low-voltage system. The module consists of a passive high-pass filter with a low cut-off frequency of 3 kHz to attenuate power frequency voltage by 80 dB and an active band-pass filter with a frequency of 4 kHz to detect series arc signals only. For the application experiment, we simulated series arcing phenomena on various loads such as incandescent lamp controlled by dimmer and inverter fed induction motors by an arc generator specified in UL1699. From the experimental results, we could detect series arc signals without an influence of noises.

• Journal of Power Electronics
• /
• v.6 no.1
• /
• pp.67-72
• /
• 2006

This paper introduces two different types of AC current control methods for an indirect vector controlled induction motor using a matrix converter. The proposed methods combine the advantages of matrix converters with the advantages of the indirect vector AC current control methods. The first proposed method explains the basic idea of the hysteresis current control method for matrix converters and shows its capability and stability in comparison to the conventional method usually used for VSI. With the aid of the special configuration of the matrix converter, we also propose another current method which is modified from the first one in order to reduce both current ripple and torque ripple. Simulation results have verified the feasibility and the effectiveness of the proposed methods.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.251-253
• /
• 2005

This paper presents a study on a current control of a PM synchronous motor which is fed by two-level voltage source inverter in the high modulation index area. In order to increase dynamic response and extend speed limit caused by voltage limit, overmodulation method is generally used. The current control in overmodulation have voltage limit. So larger voltage command than voltage limit should be diminished. In this paper, the problem conventional normalization method is analyzed and New normalization method in overmodulation region is proposed.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.36-38
• /
• 2005

In home appliances, electric energy is optimally controlled by using power electronics technology, creating a comfortable environment in terms of energy saving, low sound generation, and reduced time consumption. Usually simplicity and robustness make the three phase induction motor attractive for use in domestic appliance, including washing machines. Two main types of domestic washing machine have evolved. We focus on the front loading machine favored in Europe, which has a horizontal drum axis. The efficiency improvement in home appliances is very important for customers. Induction motor efficiency can be improved by means of loss reduction, which can be realized by motor selection and design, improvement of the waveforms supplied by power Inverter, utilizing a suitable control method. So this paper describes the architecture and feature of washing machine fed induction motor drive under minimizing losses vector control.

• Journal of Power Electronics
• /
• v.11 no.6
• /
• pp.824-836
• /
• 2011

A new fault-tolerant control topology for open-loop motor-drive systems with Delta-connected stator windings is introduced in this paper. This new control topology enables the operation of a three-phase induction machine as a two-phase machine fed by a three-phase inverter upon a failure in one of the motor phases. This topology utilizes the "open-Delta" configuration to independently control the current in each of the two remaining healthy phases. This new control technique leads to the alleviation of any torque pulsations resulting from the consequences of the asymmetrical conditions associated with this class of faults.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.260-262
• /
• 2013

본 논문에서는 2상 유도전동기의 가변속장치인 3-레그 2상 인버터의 PWM 방식을 공간벡터제어 방식으로 제안하였다. 기존의 3-레그 인버터의 PWM방식은 전형적인 SVPWM 방식을 적용하여 PWM 방식이 복잡하다. 본 논문에서는 3상 PWM 옵셋전압방식을 응용하여 2상 인버터에 적용하여 기존의 공간 벡터(space vector) PWM(SVPWM) 방식방식을 단순화 시킨 것이다. 제안된 3-레그 인버터의 PWM방식에 대한 타당성을 확인하기 위해 모의 실험과 실험이 실행되었다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.7
• /
• pp.468-474
• /
• 2000

This paper presents an investigation of the parameter modeling on the basis of Finite Element (FE) analysis in which the variable frequency characteristic in field weakening is considered in Interior Permanent Magnet Synchronous Motors (IPMSM). The parameters of IPMSM have nonlinear characteristics not only in accordance with the load variation but also with the current phase angle of a system fed inverter. From the results of FE analysis, the performances of torque and speed-power are simulated and the validity of the proposed FE analysis is compared with experimental results.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.15-17
• /
• 1999

A voice-coil-type LOA consists of the NdFeB permanent magnets with high specific energy as the stator, a coil-wrapped nonmagnetic hollow rectangular structure. We have to obtain the back-EMF constant ${\kappa}_E$ from 3D FEA and experiments, precisely. The ${\kappa}_E$ and other parameters provide the transfer function, through which is derived the frequency response characteristics. Inverter-fed LOA is examined aiming to compare with results of simulation.