• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.469-474
• /
• 2000

A sliding mode control method using the parameterization of both the hyperplane and the compensator for output feedback and reduced observer is presented for rotational inverted pendulums. This control strategy overcomes the problem of unattainable velocity state which is resulted from severe noise of analogue sense and constructs numerical algorithms designs of dynamic output feedback sliding mode hyperplane and controller. The result of the experiment shows the superior performance compared with the LQ controller and the robustness with respect to both tapping disturbances and certain initial conditions.

• 제어로봇시스템학회논문지
• /
• 제10권4호
• /
• pp.341-349
• /
• 2004

In this paper, the decentralized neural network control of the reference compensation technique is proposed to control a 2-DOF inverted pendulum on an x-y plane. The cart with the 2-DOF inverted pendulum moves on the x-y plane and the 2-DOF inverted pendulum rotates freely on the x-y axis. Since the 2-DOF inverted pendulum is divided into two 1-DOF inverted pendulums, the decentralized neural network control is applied not only to balance the angle of pendulum, but also to control the position tracking of the cart. Especially, a circular trajectory tracking is tested for position tracking control of the cart while maintaining the angle of the pendulum. Experimental results show that position control of the inverted pendulum system is successful.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1455-1463
• /
• 1990

In this study the feasibility of a dynamic gait for a given quadruped walking robot is investigated through a computer simulation of the walking with certain drivings of the actuators. Two planar inverted pendulums are used to represent the dynamic model of the leg of the walking robot. It's gait motion is assumed to be periodic and symmetric between left and right sides only with half cycle delay. The dynamics of the walking robot is simplified by introducing two virtual legs to produce two planar inverted pendulums in two orthogonal planes and on the basis that certain legs in pair act as one. The feasibility of the dynamic gait motion is established from the following two necessary conditions:(1) The position and velocity of a foot must satisfy the stroke and velocity requirements.(2) The gait motion should be periodic without falling down. The gait feasibility test was applied to a walking robot design showing the specific acceptable speed range of the robot in trot. Also it showed that the higher body height may produce the faster trot gait.

• 한국정보전자통신기술학회논문지
• /
• 제16권6호
• /
• pp.400-405
• /
• 2023

현재 도립진자는 많은 분야에서 연구 중이며 미사일, 로켓, 등의 자세 제어와 2족 보행 로봇 등에 응용되고 있다. 본 연구에서는 256펄스의 로터리 엔코더와 DC 모터를 이용한 회전형 도립진자(Rotary Inverted Pendulum)를 구성하여 회전형 역 진자의 수직 자세 제어를 연구하였다. 비선형 시스템의 경우 복잡한 알고리즘과 제어기가 필요하지만 고전적이며 비교적 간단한 PID(Proportional Integral Derivation)알고리즘을 이용한 제어 방법을 회전형 도립진자 시스템에 적용하였으며 간단하지만 원하는 성능을 높이는 방안을 연구하였다. 본 연구에서 사용된 회전형 도립진자 시스템은 비선형적이고 불안정한 시스템으로 선형화된 모델링에서 마이크로칩 사의 dsPIC30F4013 임베디드 프로세서를 이용한 PID 제어기를 설계 및 구현하였다. 보통 PID 제어기는 하나 혹은 두 가지 이상을 조합하여 설계하며 우수한 제어 성능에 비해 구조가 간단하며 제어 이득 조정이 다른 제어기들에 비해 비교적 쉽다는 장점이 있다. 본 연구에서는 시스템의 물리적 구조를 수학적 방법으로 분석하고 모델링을 통한 회전형 도립진자의 수직 균형을 위한 제어를 실현하였다. 또한 회전형 역 진자를 이용하여 PID 제어기로 제어가 가능한지 시뮬레이션과 실험을 통하여 그 타당성을 검증하였다.

• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.243-253
• /
• 2002

This paper presents the system modeling, analysis, and controller design and implementation for a rotational inverted pendulum system(RIPS), which is an under-actuated system and has the problem of unattainable angular velocity state. A sliding mode controller using the parameterization of both the hyperplane and the compensator fur output feedback is applied to the RIPS. Also, to improve the performance of the control system, a disturbance observer which estimates the disturbance, parameter variation, and some modeling errors of RIPS with less computational effort is used together. The results of simulation and experiment show that the proposed control system has superior performance for disturbance rejection and regulation at certain initial conditions.

• Journal of Mechanical Science and Technology
• /
• 제17권10호
• /
• pp.1466-1474
• /
• 2003

This paper presents a system modeling, controller design and implementation for a rotational inverted pendulum system (RIPS), which is an under-actuated system and has the problem of unattainable velocity state. Two control strategies are applied to the RIPS. One is a sliding mode control method using the parameterization of both the hyperplane and the compensator for output feedback. The other is the disturbance observer which estimates disturbance and some modeling errors of RIPS with less computational effort. Some simulations and various kinds of experiments are performed in order to verify that the proposed controller has the ability to control RIPS whose velocity is assumed to be unavailable. The results of the simulations and experiments show that the proposed control system has superior performance for disturbance rejection and regulation at certain initial conditions as well as the robustness to model uncertainties.

• 제어로봇시스템학회논문지
• /
• 제14권6호
• /
• pp.548-553
• /
• 2008

In this paper, we propose a new swing-up control strategy for rotary inverted pendulums with restricted rotation range. The control law is derived from a Lyapunov function. The Lyapunov function is defined as the square of the sum of the absolute value of the total mechanical energy and weighted squares of the arm's angular displacement and velocity. By adjusting the weighting parameters in the Lyapunov function, we can affect the swing-up strategy such that the restriction on rotation range can be satisfied. Finally, we verify the performance of the proposed control law through simulation and experiments.

• 한국지능시스템학회논문지
• /
• 제22권1호
• /
• pp.69-74
• /
• 2012

본 논문에서는 무게중심 변동이 존재하는 차륜형 역진자가 경사면을 주행하는 경우에 대한 일반적인 운동방정식이 유도되었고 기존 역진자와의 차별점들이 고찰되었다. 차륜형 역진자는 점유면적이 작은 특성 때문에 협소한 장소에서 운용되는 다양한 분야에서 이동 플랫폼으로 채용되고 있다. 차륜형 역진자는 기존 역진자의 불안정한 특성을 그대로 계승하고 있으며, 넘어지지 않고 직립하게 위해서 지속적인 제어가 실행되어야 한다. 차륜형 역진자용 고성능 제어기를 설계하기 위해서는 다양한 환경과 운용조건에서 동작하는 차륜형 역진자를 대상으로 하는 운동방정식과 그 특성을 고려하는 것은 필수적이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.1129-1134
• /
• 1989

In this paper, we propose a neural network for learning to control semi-linear dynamical systems. The network is a composite system of four three-layer backpropagation subnetworks, and is able to control inverted pendulums better than systems based on modern control theory at least in some ranges of parameters. Three of the four subnetworks in our network system process angles, velocities, and positions of a moving inverted pendulum, respectively. The outputs from those three subnetworks are input to the remaining subnetwork that makes control decisions. Each of the four subnetworks learns connection weights independently by backpropagation algorithms. Teaching signals are given by the human operator. Also, input signals are generated by the human operator, but they are converted by preprocessors to actual input data for the three subnetworks except for the network for control decisions. The whole system is implemented on both of 16 bit personal computers and 32 bit workstations. First, we briefly provide the research background and the inverted pendulum problem itself, followed by the description of our composite neural network model. Next, some results from the simulation are given, which are subsequently compared with the results from a control system based on modern control theory. Then, some discussions and conclusion follow.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.405-408
• /
• 2007

Vestibular hair cells, the sensory receptors of vestibular organs, selectively amplify miniscule stimuli to attain high sensitivity. Such selective amplification results in compressive nonlinear sensitivity, which plays an important role in expanding dynamic range while ensuring robustness of the system. In this study, negative stiffness mechanism, a mechanism responsible for the selective amplification by vestibular hair cells, is applied to a simple mechanical system consisting of an array of inverted pendulums. The structure and working principle of the system have been inspired by gating spring hypothesis proposing that opening and closing of transduction channels contributes to the global stiffness of vestibular hair bundle. Parameter study was carried out to analyze the effect of each parameter on the compressive nonlinearity of suggested model.