• Geophysics and Geophysical Exploration
• /
• v.14 no.2
• /
• pp.140-145
• /
• 2011

In order to analyze the influence of the noise on a cross-well traveltime tomography to detect a small scale low velocity body in a homogeneous medium, the first arrival travel times were computed one a tunnel model by a finite-difference ray tracing scheme. Three different types and four different intensity levels of white noises were added to the computed first arrival travel times, and velocity tomograms were constructed using an iterative inversion method (SIRT). Tomograms with the noise intensity up to 10% of the maximum traveltime delay in the tunnel model, showed the exact location of the tunnel. However, the velocity shown at the tunnel location was not close to air velocity but only slightly less than the velocity of the background medium. The additive random noise showed significantly less degree of influence on the resulting tomogram than the source- and receiver consistent noise.

• Journal of Environmental Science International
• /
• v.21 no.9
• /
• pp.1097-1113
• /
• 2012

Ozone is the secondary photochemical pollutant formed from ozone precursor such as nitrogen dioxide and non-methane volatile organic compounds(VOCs). The ambient concentration of ozone depends on several factors: sunshine intensity, atmospheric convection, the height of the thermal inversion layer, concentrations of nitrogen oxides and VOCs. Busan is located in the southeast coastal area of Korea so the ozone concentration of Busan is mainly affected from the meteorological variables related to the sea such as sea breeze. In this study the ozone concentrations of Busan in 2008~2010 were used to analyse the cause of the regional ozone difference in eastern area of Busan. The average ozone concentration of Youngsuri was highest in Busan however the average ozone concentration of Gijang was equal to the average ozone concentration of Busan in 2008~2010. The two sites are located in eastern area of Busan but the distance of two sites is only 9km. To find the reason for the difference of ozone concentration between Youngsuri and Gijang, the meteorological variables in two sites were analyzed. For the analysis of meteorological variables the atmospheric numerical model WRF(Weather Research and Forecasting) was used at the day of the maximum and minimum difference in the ozone concentration at the two sites. As a result of analysis, when the boundary layer height was lower and the sea breeze was weaker in Youngsuri, the ozone concentration of Youngsuri was high. Furthermore when the sea breeze blew from the south in the eastern area of Busan, the sea breeze at Youngsuri turned into the southeast and the intensity of sea breeze was weaker because of the mountain in the southern region of Youngsuri. In that case, the difference of ozone concentration between Youngsuri and Gijang was considerable.

• Korean Journal of Radiology
• /
• v.2 no.4
• /
• pp.183-191
• /
• 2001

Objective: To document the signal characteristics of intracerebral hemorrhage (ICH) at evolving stages on diffusion-weighted images (DWI) by comparison with conventional MR images. Materials and Methods: In our retrospective study, 38 patients with ICH underwent a set of imaging sequences that included DWI, T1-and T2-weighted imaging, and fluid-attenuated inversion recovery (FLAIR). In 33 and 10 patients, respectively, conventional and echo-planar T2^* gradient-echo images were also obtained. According to the time interval between symptom onset and initial MRI, five stages were categorized: hyperacute (n=6); acute (n=7); early subacute (n=7); late subacute (n=10); and chronic (n=8). We investigated the signal intensity and apparent diffusion coefficient (ADC) of ICH and compared the signal intensities of hematomas at DWI and on conventional MR images. Results: DWI showed that hematomas were hyperintense at the hyperacute and late subacute stages, and hypointense at the acute, early subacute and chronic stages. Invariably, focal hypointensity was observed within a hyperacute hematoma. At the hyperacute, acute and early subacute stages, hyperintense rims that corresponded with edema surrounding the hematoma were present. The mean ADC ratio was 0.73 at the hyperacute stage, 0.72 at the acute stage, 0.70 at the early subacute stage, 0.72 at the late subacute stage, and 2.56 at the chronic stage. Conclusion: DWI showed that the signal intensity of an ICH may be related to both its ADC value and the magnetic susceptibility effect. In patients with acute stroke, an understanding of the characteristic features of ICH seen at DWI can be helpful in both the characterization of intracranial hemorrhagic lesions and the differentiation of hemorrhage from ischemia.

• Journal of Magnetics
• /
• v.19 no.1
• /
• pp.64-67
• /
• 2014

$Ni_{0.6}Zn_{0.4}Fe_2O_4$ prepared using solid state reaction and sol-gel methods were compared for their structural and magnetic properties. Due to the much higher annealing temperature used in solid state reaction, the crystalline size was much larger than that of the nanoparticles prepared by sol-gel. The saturation magnetization of sol-gel nanoparticles was higher, and the coercivity was about 2 times larger, compared to the solid state reaction sample. By analyzing the integration intensity of x-ray diffraction peaks (220) and (222), we proposed that the difference in the saturation magnetization might be due to the inversion of cation distribution caused by the different preparation techniques used.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1146-1151
• /
• 2004

Measurements of OH chemiluminescence in an atmospheric pressure, laboratory-scale dump combustor at equivalence ratios ranging from 0.63 to 0.89 were reported. The signal from the first electronically excited state of OH to ground state was detected through a band-pass filter with an ICCD. The objectives of this study are two: One is to see the effects of equivalence ratio on global heat release rate and local Rayleigh index distribution. To get the local Rayleigh index distribution, the line-of-sight images were inverted by tomographic method, such as Abel de-convolution. Another aim is to investigate the validity of using OH chemiluminescence acquired with an ICCD as a qualitative measure of local heat release. For constant inlet velocity and temperature, the overall intensities of OH emission acquired at different equivalence ratio showed periodic and higher value at high equivalence ratio. OH intensity averaged over one period of pressure increased exponentially with equivalence ratio. Local Rayleigh index distribution clearly showed the region of amplifying or damping the combustion instability as equivalence ratio increased. It could provide an information/insights on active control such as secondary fuel injection. Finally, local heat release rate derived from reconstructed OH images were presented for typical locations.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.230-234
• /
• 2001

We report a simple method for determining photovoltaic constant and conductivities of any photorefractive crytals which have no inversion symmetry by utilizing the electric field dependence of non-phase-matched second harmonic generation. New theoretical expression for the electric field dependence of Maker fringes is derived and space charge field can be determined using this from the observed change of intensity of second harmonic wave. The photovoltaic constant, dark conductivity and photoconductivity are easily deduced from an analysis of the measured relaxation behavior of space-charge field at two different light intensities. We demonstrate this method for $LiNbO_3$ at 514.5 nm.4.5 nm.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.4 no.2
• /
• pp.131-136
• /
• 2006

Metronidazole is an antimicrobial drug widely used against various types of infectious agents, including protozoa, amoeba, Helicobacter pylori, and anaerobes. Metronidazole may produce some adverse effects on hematologic, immunologic, neurologic and other systems. We report a case of reversible metronidazole-induced encephalopathy. The toxic dose of metronidazole and the onset of encephalopathy were variable. Two patients showed abnormally high signal intensity in the bilateral dentate nucleus of cerebellum, and characteristic abnormalities were detected by brain magnetic resonance imaging (MRI) and T2-weighted images, fluid-attenuated inversion recovery images and/or diffusion weighted imaging (DWI). Discontinuation of metronidazole resulted in the improvement of the neurologic symptoms over a period of two to three weeks. We followed up the brain MRI with DWI in one case following obvious clinical improvement, and the previously detected lesion had disappeared.

• Journal of The Korean Astronomical Society
• /
• v.25 no.2
• /
• pp.111-128
• /
• 1992

Infrared emissions from spherical dust, clouds are calculated using quasi-diffusion method. We have employed graphite-silicate mixture with power-law size distribution for the dust model. The grains are assumed to be heated and cooled by radiative processes only. The primary heating source is diffuse interstellar radiation field. hut the cases with an embedded source are also considered. Since graphite grains have higher temperature than silicate grains, the observed IR emission is mainly due to graphite grains, unless the fraction of graphite grains is negligibly small. The color temperature of Bok globules obtained from IRAS 60 and $100{\mu}m$ data are found to be consistent with the dust cloud with graphite-silicate mixture exposed to average interstellar radiation field. The color temperature is sensitive to the external radiation field, but rather insensitive to the size distribution of the grains. We found that the density distribution can be recovered outside the beam size using the inversion technique that assumes negligible optical depth. However, the information within the beam size is lost for if beam convolved intensity distributions are used in deriving density profile.

• Structural Engineering and Mechanics
• /
• v.67 no.3
• /
• pp.277-281
• /
• 2018

The analytical solution of two functionally graded layers with Volterra type screw dislocation is investigated under anti-plane shear impact loading. The energy dissipation of FGM layers is modeled by viscous damping and the properties of the materials are assumed to change exponentially along the thickness of the layers. In this study, the rate of gradual change ofshear moduli, mass density and damping constant are assumed to be same. At first, the stress fields in the interface of the FGM layers are derived by using a single dislocation. Then, by determining a distributed dislocation density on the crack surface and by using the Fourier and Laplace integral transforms, the problem are reduce to a system ofsingular integral equations with simple Cauchy kernel. The dynamic stress intensity factors are determined by numerical Laplace inversion and the distributed dislocation technique. Finally, various examples are provided to investigate the effects of the geometrical parameters, material properties, viscous damping and cracks configuration on the dynamic fracture behavior of the interacting cracks.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.12
• /
• pp.1737-1743
• /
• 2002

We have studied the dynamics of energy-rich hydrogen molecules produced on a graphite surface through H(g) + H(ad)/C(gr) → $H_2$ + C(gr) at thermal conditions mimicking the interstellar medium using a classical trajectory procedure. The recombination reaction of gaseous H atom at 100 K and the adsorbed H atom on the interstellar graphite grains at 10 K efficiently takes place on a subpicosecond time scale with most of the reaction exothermicity depositing in the product vibration, which leads to a strong vibrational population inversion. The molecules produced in nearly end-on geometry where H(g) is positioned below H(ad) rotate clockwise and are more highly rotationally excited. but in low-lying vibrational levels. The rotational axis of most of the molecule rotating clockwise is tilted from the surface normal by more than 30°, the intensity peaking at 35°. The molecules produced when H(ad) is close to the surface rotate counter-clockwise and are weakly rotationally excited, but highly vibrationally excited. These molecules tend to align their rotational axes parallel to the surface. The number of molecules rotating clockwise is eight times larger than that rotating counter-clockwise.