• 한국지구물리탐사학회:학술대회논문집
• /
• 2009.05a
• /
• pp.47-56
• /
• 2009

Proper reservoir characterization is an integral part of formation evaluation, reserve estimation and planning of field development. Seismic inversion is a widely employed reservoir characterization tool that provides various rock properties of reservoir intervals. This study presents results of the inversion studies including Geostatistical Inversion carried out on the gas fields, offshore Myanmar. Higher resolution and multiple models can be produced by Geostatistical Inversion using input data such as pre-stack seismic data, well logs, petrophysical relationships and geological inferences for example reservoir shape and lateral extent. Detailed reservoir characterization was required for the development plan of gas fields, and the Geostatistical Inversion studies served as a basis for integrated geological modeling and development well planning.

• Journal of Environmental Science International
• /
• v.7 no.2
• /
• pp.195-202
• /
• 1998

The low level atmospheric obsewation carried out to Investigate magnitude, formation and dissipation of nocturnal surface Inversion layer, also to survey relation to each meterological parameter In Inversion layer at Pusan power plant for Oct. 13, 1996. As coastal area, the surface Inversion layer height was relatively high(186m), and after sunset unstable layer formated firom surface to around 40m, and the Inversion layer was left still in the upper layer. The surface Inversion layer dissipated at 0920LST perfectly. The layer that strong Inversion layer was formated, showed steep variation of potential temperature and wand speed and relative humidity.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.2
• /
• pp.53-60
• /
• 2007

This paper presents a robust nonlinear autopilot design method based on dynamic inversion and PI(Proportional-Integral) control law. The new controller structure which is different from previous work is composed of classical linear PI control law and nonlinear fast dynamic inversion. A pitch axis model of highly maneuverable missiles and a linearized model for designing Pl controller are presented. The performance of proposed method is illustrated via nonlinear simulations including aerodynamic uncertainties and actuator dynamics.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.12
• /
• pp.1281-1285
• /
• 1997

The time-dependent tracking inversion method is developed to extract the potential of the excited state from frequency-domain measurements, such as the absorption profile. Based on the relay of the regularized inversion procedure and time-dependent wave-packet propagation, the algorithm extract the underlying potential piece by piece by tracking the time-dependent data which can be synthesized from frequency-domain measurements. We have demonstrated the algorithm to extract the potential of excited state for a model diatomic molecule. Finally, we describe the merits of the time-dependent tracking inversion method compared to the time-dependent inversion and discuss several extensions of the algorithm.

• Geophysics and Geophysical Exploration
• /
• v.17 no.4
• /
• pp.187-201
• /
• 2014

Compared with the separated inversion of electromagnetic (EM) and seismic data, a joint inversion using both EM and seismic data reduces the uncertainty and gives the opportunity to use the advantage of each data. Seismic fullwaveform inversion allows velocity information with high resolution in complicated subsurface. However, it is an indirect survey which finds the structure containing oil and gas. On the other hand, marine controlled-source EM (mCSEM) inversion can directly indicate the oil and gas using different EM properties of hydrocarbon with marine sediments and cap rocks whereas it has poor resolution than seismic method. In this paper, we have developed a joint EM inversion algorithm using a cross-gradient technique. P-wave velocity structure obtained by full-waveform inversion using plane wave encoding is used as structure constraints to calculate the cross-gradient term in the joint inversion. When the jointinversion algorithm is applied to the synthetic data which are simulated for subsea reservoir exploration, images have been significantly improved over those obtained from separate EM inversion. The results indicate that the developed joint inversion scheme can be applied for detecting reservoir and calculating the accurate oil and gas reserves.

• Geophysics and Geophysical Exploration
• /
• v.6 no.4
• /
• pp.199-206
• /
• 2003

Characteristics of the static shift are discussed by comparing the three-dimensional MT inversion with/without static shift parameterization. The galvanic distortion by small-scale shallow feature often leads severe distortion in inverted resistivity structures. The new inversion algorithm is applied to four numerical data sets contaminated by different amount of static shift. In real field data interpretations, we generally do not have any a-priori information about how much the data contains the static shift. In this study, we developed an algorithm for finding both Lagrangian multiplier for smoothness and the trade-off parameter for static shift, simultaneously in 3-D MT inversion. Applications of this inversion routine for the numerical data sets showed quite reasonable estimation of static shift parameters without any a-priori information. The inversion scheme is successfully applied to all the four data sets, even when the static shift does not obey the Gaussian distribution. Allowing the static shift parameters have non-zero degree of freedom to the inversion, we could get more accurate block resistivities as well as static shifts in the data. When inversion does not consider the static shift as inversion parameters (conventional MT inversion), the block resistivities on the surface are modified considerably to match possible static shift. The inhomogeneous blocks on the surface can generate the static shift at low frequencies. By those mechanisms, the conventional 3-D MT inversion can reconstruct the resistivity structures to some extent in the deeper parts even when moderate static shifts are in the data. As frequency increased, however, the galvanic distortion is not frequency independent any more, and thus the conventional inversion failed to fit the apparent resistivity and phase, especially when strong static shift is added. Even in such case, however, reasonable estimation of block resistivity as well as static shift parameters were obtained by 3-D MT inversion with static shift parameterization.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11
• /
• pp.3131-3139
• /
• 1999

Satisfying the rigid timing requirements of various real-time activities in real-time systems often requires some special methods to tune the systems run-time behaviors. Unbounded blocking can be caused when a high priority activity cannot preempt a low priority activity. In such situation, it is said that a priority inversion has occurred. The priority inversion is one of the problems which may prevent threads from meeting the deadlines in the real-time systems. It is difficult to remove such priority inversion problems in the kernel at the same time to bound the worst case blocking time for the threads. A thread is a piece of executable code which has access to data and stack. In this paper, a new real-time systems. It is difficult to remove such priority inversion problems in the kernel at the same time to bound the worst case blocking time for the threads. A threads is a piece of executable code which has access to data and stack. In this paper, a new real-time server model, which minimizes the duration of priority inversion, is proposed to reduce the priority inversion problem. The proposed server model provides a framework for building a better server structure, which can not only minimize the duration of the priority inversion, but also reduce the deadline miss ratio of higher priority threads.

• Ocean and Polar Research
• /
• v.42 no.2
• /
• pp.97-113
• /
• 2020

In-situ observations were carried out in April 2015 to investigate the occurrence of water temperature inversion in a region west of Jeju Island. Analysis of in-situ in the western part of Jeju island showed that cold water moved to the southeast from the surface to the middle layer and warm water moved from the middle to the lower layer of the northwest direction. The water temperature inversion occurred at 84 stations (63.1%) out of 133 stations. At the boundary of the water temperature inversion layer, it was formed in the middle layer and disappeared. In the strongly appearing, it started from the middle layer to the lower layer. The shape of the water temperature inversion layer was different. As a result of horizontal water temperature slope analysis of the water temperature inversion zone, maximum 0.23℃/km was obtained and the mean was 0.06℃/km. The role of water temperature inversion as an indicator to determine the formation of water front. As a result of the water mass analysis, Jeju Warm Current Water and Tsushima Warm Current Water of high temperature and high salt intruded from the middle to the bottom. In the middle layer occurred as the Yellow Sea Cold Water of low water temperature and low salinity expanded.

• Biomedical Science Letters
• /
• v.15 no.4
• /
• pp.363-368
• /
• 2009

One of the frequent occurrences in rearrangements is chromosome inversion. Pericentric inversion is considered to be the variant of normal karyotype. We investigated the karyotypes of 1195 cases being referred to prenatal diagnosis using standard GTG banding for karyotype preparation. The chromosomal analysis revealed a total of 15 (1.26%) inversions. The characteristics of inversion type [(inv(4), inv(8), inv(9), inv(11)) were investigated on the basis of chromosomal analyses of fetuses and their parents. The results from chromosomal examination of the parents, whose fetuses were diagnosed as inversion, show that either parent might be the carrier. Inversion in human chromosome is commonly seen in normal humans and the frequency estimated to be 1 to 2% in general population and the exact amount of this phenomenon is still unclear. These results indicate that inv(8), inv(9), and inv(11) are phenotypically normal. However these may often cause clinical problems in offspring of the carrier, such as fetal wastage repeated spontaneous abortions and infertility with unknown mechanisms related to sex. We describe an inversion of human chromosome and its clinical correlation with human genetic disease.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.10 no.1 s.20
• /
• pp.55-59
• /
• 2004

Temperature inversion off Wasaka Bay in the East Sea was studied using data measured on a CREAMS cruise in June of 1995 and 1996. Temperature inversion occurred mainly at the upper layer of the thermocline at a depth of no more than 20 m and around the thermal front between the TWC and the coastal waters of Japan. At some stations. temperature inversion had an influence un density inversion, while, in some other stations, high salinity water prevented density inversion.