• Horticultural Science & Technology
• /
• v.28 no.6
• /
• pp.1066-1071
• /
• 2010

To evaluate the effect of horticultural therapy (HT) on the emotional improvement of depressed patients, computer-based heart rate variability (HRV) was compared with self-report scale (SRS) known as existing subjective evaluation method. SRS included four test areas: mental stress scale (MSS), physical stress scale (PSS), Beck anxiety inventory (BAI), and Beck depression inventory (BDI). HRV was itemized into four parameters: standard deviation of the N-N intervals (SDNN), square root of mean squared difference of successive N-N intervals (RMSSD), total power (TP), and low-frequency/high-frequency ratio (LF/HF ratio). Thirty patients with depression at the same mental hospital participated in this study. 15 patients of the treatment group received HT once a week for three months, but the control group did not during the same period. As a result, the emotional improvement in treatment group was clearly identified through HRV as well as SRS. The significant difference was shown at three test areas (MSS, BAI, and BDI, $p$ < 0.001) in SRS and at one parameter (total power, $p$ < 0.05) in HRV. There was noticeable increase in SDNN, RMSSD, and LF/HF ratio in treatment group after HT activity, but no significant difference. Although all parameters of HRV did not show significance, the possibility of HRV as an objective evaluation method to HT was recognized in this study. These results also implied that HT was efficient in the mental and physical regeneration of the depressed patients in both subjective and objective evaluation methods.

• Journal of the Korean Society of Food Culture
• /
• v.14 no.4
• /
• pp.431-446
• /
• 1999

The purpose of this study is to examine current foodservice management practices at free congregate meal service for elderly people. Forty seven meal service centers as well as randomly selected Seoul and Kyunggido area were surveyed and interviewed and results were summarized as follows: The cost of each meal(lunch) was ranged from 1,300 won to 1,500 won and 68% of target centers were severed over 100 meals per day. Meal time for lunch begins from 10:30 am to 12:00 because great portion of elderly didn't take breakfast frequently. 52.3% of centers severed meal 5 times per week, just weekdays. 21.3% of centers employeed dietitian, 63.8% of center employeed cook. 95.7% of center were supported labor force by volunteers. Volunteer was important contribution to free meal service. Utilizing the labor force more effectively is thus a major challenge facing manager in each center. Ideal supporting system of free foodstuff, foodbank was still minor source of securing foodstuff. Most of centers(46 centers)served lunch, only one of them served breakfast and lunch. Government was the major financial sponsor, the second of them was religious organization. The large portions of financial support provided only food cost of total meal service budget. Most of center adapted self-service system. Standardized recipes were not developed and meal preparation was controlled under the experience of volunteers. Recording system of nutrition management, production control, storage and inventory control was not adapted by most of sites. It is suggested that in order to meet the change of the patterns of social and family structure, the service of the center should be offended in urban area and it is necessary to develop systematic management models for the center. It was suggested that not only financial support but also systematical support on management by the local government may be necessary to meet the goal of supply nutritionally balanced food at center.

• Journal of Korean Society of Transportation
• /
• v.19 no.4
• /
• pp.35-47
• /
• 2001

Traffic represents one of the largest sources of primary air pollutants in urban area. As a consequence. numerous abatement strategies are being pursued to decrease the ambient concentration of pollutants. A characteristic of most of the these strategies is a requirement for accurate data on both the quantity and spatial distribution of emissions to air in the form of an atmospheric emission inventory database. In the case of traffic pollution, such an inventory must be compiled using activity statistics and emission factors for vehicle types. The majority of inventories are compiled using passive data from either surveys or transportation models and by their very nature tend to be out-of-date by the time they are compiled. The study of current trends are towards integrating urban traffic control systems and assessments of the environmental effects of motor vehicles. In this study, a methodology of motor vehicle emission calculation by using real-time traffic data was studied. A methodology for estimating emissions of CO at a test area in Seoul. Traffic data, which are required on a street-by-street basis, is obtained from induction loops of traffic control system. It was calculated speed-related mass of CO emission from traffic tail pipe of data from traffic system, and parameters are considered, volume, composition, average velocity, link length. And, the result was compared with that of a method of emission calculation by VKT(Vehicle Kilometer Travelled) of vehicles of category.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.1
• /
• pp.130-139
• /
• 2016

The purpose of this paper is to analyze the problems and the sources of defective products and draw improvement plans in a small plastic boat manufacturing process using TOC (Theory Of Constraints) and statistical analysis. TOC is a methodology to present a scheme for optimization of production process by finding the CCR (Capacity Constraints Resource) in the organization or the all production process through the concentration improvement activity. In this paper, we found and reformed constraints and bottlenecks in plastic boat manufacturing process in the target company for less defect ratio and production cost by applying DBR (Drum, Buffer, Rope) scheduling. And we set the threshold values for the critical process variables using statistical analysis. The result can be summarized as follows. First, CCRs in inventory control, material mix, and oven setting were found and solutions were suggested by applying DBR method. Second, the logical thinking process was utilized to find core conflict factors and draw solutions. Third, to specify the solution plan, experiment data were statistically analyzed. Data were collected from the daily journal addressing the details of 96 products such as temperature, humidity, duration and temperature of heating process, rotation speed, duration time of cooling, and the temperature of removal process. Basic statistics and logistic regression analysis were conducted with the defection as the dependent variable. Finally, critical values for major processes were proposed based on the analysis. This paper has a practical importance in contribution to the quality level of the target company through theoretical approach, TOC, and statistical analysis. However, limited number of data might depreciate the significance of the analysis and therefore it will be interesting further research direction to specify the significant manufacturing conditions across different products and processes.

• Culinary science and hospitality research
• /
• v.16 no.1
• /
• pp.191-208
• /
• 2010

The hotel business should enhance a service quality in order to improve management skills and profits. However, when compared the size of foodservice industry and hotel, it is show that the hotel management systems are insufficient. In this respect, this study examines how the culture of hotel business affects to service quality. The results of the analysis are as follows. First, the culture of hotel business affects restaurant tendency. Consequently, the hotel, which is open-minded culture, copes with the external changes in a flexible manner. Second, the culture of hotel business affects hotel management skills. Good culture of the business creates the positive result toward the employees, customers, prime cost and inventory control. Third, hotel restaurant tendency affects to efficient hotel service quality and management performance. Fourth, change of hotel management skills brings difference of service quality and management performance. Good hotel management skills will be able to raise the competitive power between hotels. In the future, various empirical researches are continuously expected. By doing so, the result of the study helps to scholars and hotel managers.

• The Korean Journal of Pain
• /
• v.34 no.2
• /
• pp.217-228
• /
• 2021

Background: The purpose of this study was to assess the effectiveness of transcutaneous electrical nerve stimulation (TENS) in chronic low back pain and neuropathic pain. Methods: Seventy-four patients aged 18-65 with chronic low back pain were included in the study. Baseline measurements were performed, and patients were randomized into three groups. The first group received burst TENS (bTENS), the second group conventional TENS (cTENS), and the third group placebo TENS (pTENS), all over 15 sessions. Patients' visual analogue scale (VAS) scores were evaluated before treatment (preT), immediately after treatment (postT), and in the third month after treatment (postT3). Douleur Neuropathique 4 Questions (DN4), the Modified Oswestry Low Back Pain Disability Questionnaire (MOS), the Beck Depression Inventory (BDI), and sympathetic skin response (SSR) values were also evaluated preT and postT3. Results: A statistically significant improvement was observed in mean VAS scores postT compared to preT in all three groups. Intergroup comparison revealed a significant difference between preT and postT values, that difference being assessed in favor of bTENS at multiple comparison analysis. Although significant improvement was determined in neuropathic pain DN4 scores measured at postT3 compared to preT in all groups, there was no significant difference between the groups. No statistically significant difference was also observed between the groups in terms of MOS, BDI, or SSR values at postT3 (P > 0.05). Conclusions: bTENS therapy in patients with low back pain is an effective and safe method that can be employed in short-term pain control.

• Journal of People, Plants, and Environment
• /
• v.24 no.2
• /
• pp.195-207
• /
• 2021

Background and objective: While response measures to particulate matters in rural areas are limited due to poor inventory record keeping in the agricultural sector, it is necessary to control agricultural waste vinyl and the emission of precursors released from open burning and the secondary generation of particulate matters. Currently, the open burning emission calculation method uses the definition prescribed in CAPSS by the National Institute of Environmental Research. Methods: This study presented an open burning emission calculation formula for agricultural waste vinyl, which is included as agricultural waste. As for activity data, the open burning ratio of agricultural waste vinyl, and the annual incineration volume provided in the Status Survey by the Ministry of Agriculture, Food, and Rural Affairs were applied. The emission factor was generated through incineration tests on three agricultural plastic film samples collected by the Korea Environment Corporation. Results: Among precursors, SOx and NOx were selected and their emission features were monitored with incineration experiment infrastructure based on the EPA 5G method. The highest emission concentration by agricultural waste type was concentrated in the first and second quarters. As for emission factor of SO₂, it was calculated at 98.25 g/kg for mulching-use LDPE, 52.31 g/kg for greenhouse-use LDPE, and 14.40 g/kg for HDPE. As for NOx, it was calculated at 18.21 g/kg for mulching-use LDPE, 16.49 g/kg for greenhouse-use LDPE, and 10.67 g/kg for HDPE. Conclusion: This test confirmed the incineration features of PE-based plastics, ascertained the SOx emission factor that had not been included in open burning in the past, and established that low NOx emission concentration is interfered by soil mixed with livestock excretions. The findings from this study are expected to contribute to improving the system for controlling air pollutants in rural environments.

• Journal of Korean Society of Forest Science
• /
• v.96 no.1
• /
• pp.7-13
• /
• 2007

This study was done to develop PDA based application system for forest geographic information with GPS. The major results obtained in this study were as follows. A PDA based application program was developed to work on $Microsoft^{TM}$ PocketPC 2002 and 2003 operating system. The screen of PDA displays a 1:25,000 digital topographical map adopted DXF format converted from PC, and the map data with 1:2,500 to 1:30,000 on PDA can be zoomed in or out to five levels. Current position and navigating path received from GPS can be displayed on the screen and be saved in PDA. Information selected among layers of digital topographic map in DXF format can be converted into binary files which can be used on forest geographic information software. This can compress DXF files to 90% in size, and the processing speed of PDA was improved. The forest geographic information management system can be used to manage sample plots on which forest inventory is done, with the help of the sub-menus and grid index values with position information received from GPS. Forest workers can in quire forest geographic information such as forest type, location, forest roads, soil erosion control dams using forest geographic information management system in the field. The forest geographic information management system can provide current position and mobile path information to people who enjoy forest related activities like mountain-climbing, sightseeing, and visiting to historic spots.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.4
• /
• pp.283-290
• /
• 2022

In this study, an IoT inspection system that can be linked with a server was developed using a gas timer and ESP-01 Wi-Fi module installed on a gas valve in the home. The server environment of the gas leak IoT inspection system was installed with APM (Apache, PHP, MySQL) to collect gas pressure data by generation so that leakage checks could be performed. In order to control the gas leak IoT inspection system, the app inventory was used to manage the gas leak check value in real time. In addition, user convenience has been enhanced so that membership management, WiFi settings, and leakage check values can be checked through mobile apps. In order to manage subscribers by region, the user list was checked by logging in in in the administrator mode so that the information on whether or not the leak test was conducted and the results could be provided. In addition, when the user presses the gas leak check button, the pressure is automatically checked, and the measured value is stored in the server, and when a gas leak occurs, the leakage check is performed after alarm and repair so that it can be used if normal. In addition, in order to prevent overlapping membership, membership management can be performed based on MAC addresses.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3543-3548
• /
• 2023

Shutdown chemistry evolution is performed in nuclear power plants at each refueling outage (RFO) to establish safe conditions to open system and minimize inventory of corrosion products in the reactor coolant system (RCS). After hydrogen peroxide is added to RCS during shutdown chemistry evolution, corrosion products are released and are removed by filters and ion exchange resins in the chemical volume control system (CVCS). Shutdown chemistry evolution including RCS clean-up time to remove released corrosion products impacts the critical path schedule during RFOs. The estimation of clean-up time prior to RFO can provide more reliable actions for RCS clean-up operations and transients to operators during shutdown chemistry. Electric Power Research Institute (EPRI) shutdown calculator (SDC) enables to provide clean-up time by Co-58 peak activity through operational data from nuclear power plants (NPPs). In this study, we have investigated the results of EPRI SDC by shutdown chemistry data of Co-58 activity using NPP data from previous cycles and modeled the estimated clean-up time by EPRI SDC using average Co-58 activity of the NPP. We selected two RFO data from the NPP to evaluate EPRI SDC results using the purification time to reach to 1.3 mCi/cc of Co-58 after hydrogen peroxide addition. Comparing two RFO data, the similar purification time between actual and computed data by EPRI SDC, 0.92 and 1.74 h respectively, was observed with the deviation of 3.7-7.2%. As the modeling the estimated clean-up time, we calculated average Co-58 peak concentration for normal cycles after cycle 10 and applied two-sigma (2σ, 95.4%) for predicted Co-58 peak concentration as upper and lower values compared to the average data. For the verification of modeling, shutdown chemistry data for RFO 17 was used. Predicted RCS clean-up time with lower and upper values was between 21.05 and 27.58 h, and clean-up time for RFO 17 was 24.75 h, within the predicted time band. Therefore, our calculated modeling band was validated. This approach can be identified that the advantage of the modeling for clean-up time with SDC is that the primary prediction of shutdown chemistry plans can be performed more reliably during shutdown chemistry. This research can contribute to improving the efficiency and safety of shutdown chemistry evolution in nuclear power plants.