• 한국식품과학회지
• /
• 제17권3호
• /
• pp.131-135
• /
• 1985

쌀보리와 겉보리전분의 희석 및 농후호화용액에 대한 리올로지적 성질을 여러 점도계를 사용하여 연구하였다. 희석전분액(0.05${\sim}$0.3%)의 점도특성은 Huggins식에 따르는 고유점도 및 해수에 의하여 설명할 수 있었으며, 농후전분용액(1${\sim}$5%)의 리올로지적 거동은 농도의 증가에 따라 시간의존성과 의가소성의 성질이 현저히 강해지는 특징을 나타내었다. 지수법칙을 적용하여 구한 점조도지수 값은 지수함수식에 따르는 농도 및 은도의존성을 나타내었다. 한편 이들 결과는 리올로지적 성질이 품종차이에 따라 크게 달라지는 경향을 보였다. 쌀보리전분은 겉보리전분보다 더 큰 고유점도값을 나타내었으며, 틱소트로픽성질이 더 강한 것으로 나타난다. 아울러 점조도지수 값의 농도 및 온도의존성도 더 높은 경향이었다. 그러나 보리전분은 다른 전분에 비하여 비교적 낮은 농도의존성과 높은 온도의존성을 갖는 특징을 보였다.

• 한국식품영양과학회지
• /
• 제30권4호
• /
• pp.569-573
• /
• 2001

본 연구는 유자 과즙 제조시 부산물로 생기는 유자박의 효율적인 활용을 위해 펙틴 물질을 추출하여 그 수율을 측정하였고, 추출된 펙틴의 특성을 조사하였다. 추출용매로서 무기산은 HCl을, 그리고 유기산은 citrate 와 tartrate를 사용하였다. 각각의 용매에 대하여 추출비율을 달리하여 펙틴을 추출한 결과 1:20이 가장 좋은 비율(건조 유자박: 용매, w/v)로 나타났으며, 사용한 추출용액의 최적 농도는 무기산인 경우는 0.05N, 유기산인 경우는 0.1N이었다. 펙틴 추출과정에서 펙틴에 잔존하는 당을 제거하기 위해 95% ethanol로 1차 펙틴을 침전시킨 후, 65% ethanol로 6회 세척하였다. 펙틴의 추출 수율은 0.05N HCl은 18.7%, 0.1N citrate는 15.5%, 그리고 0.1N tartrate는 11.4%이였다. 추출한 펙틴의 DE는 42.97~47.55%로 low methoxyl pectin으로 분류될 수 있으며, intrinsic viscosity는 0.94~2.63의 범위였다. 분리한 펙틴의 당조성은 무기산으로 추출된 펙틴(4.2~4.7%)이 유기산으로 추출된 펙틴(15~19%)에 비하여 arabinose가 적은 함량을 나타내었고, rhamnose, xylose, glucuronic acid, galacturonic acid, galactose 그리고 glucose의 당 함량은 추출된 세 종류의 펙틴에서 큰 차이를 보이지 않았다.

• 한국식품과학회지
• /
• 제24권2호
• /
• pp.187-192
• /
• 1992

일반계와 통일계 쌀 전분에 대한 구조적 성질을 조사하고 그 차이점을 비교하였다. 쌀 성분의 호화온도 범위는 일반계가 통일계보다 넓었고 쌀 전분의 최대 흡수파장은 일반계가 통일계 보다 높았다. 고유점도는 전분, 아밀로오스와 아밀로펙틴 모두 일반계가 통일계 보다 낮았다. ${\beta}$-아밀라아제 분해 한도는 전분에서는 차이가 없으나 아밀로오스와 아밀로펙틴은 일반계가 통일계 보다 약간 낮았다. 아밀로펙틴의 평균 사슬 길이와 바깥 사슬 길이는 일반계가 통일계 보다 짧았으나 안쪽 사슬 길이는 차이가 없었다. 열수 가용성 전분과 아밀로오스 함량은 일반계가 통일계 보다 높았다. 또한 열수 가용성 전분을 겔 크로마토그래피한 결과는 품종마다 독특한 용출모양을 보였다.

• 폴리머
• /
• 제30권2호
• /
• pp.118-123
• /
• 2006

폴리(부틸렌 테레프탈레이트)(PBT)와 폴리(에틸렌 테레프탈레이트)(PET)의 용융 가공시 발생하는 상호에스테르 교환반응이 PBT/PET 블렌드의 유변 물성에 미치는 영향에 대하여 살펴보았다. PBT에 PET를 용융 블렌딩하면 PET의 상대적인 낮은 점도에 의하여 PET의 함량이 증가할수록 PET의 점도가 감소됨을 알 수 있었으며 이와 함께 용융가공시 발생하는 분자량 감소와 PBT와 PET 상호간에 발생하는 상호에스테르 교환반응에 의하여 추가적인 용융점도 감소가 있음을 확인하였다. 또한 PBT와는 달리 윤활제로 사용한 calcium stearate(CaST)는 PBT/PET 블렌드에서 윤활 작용은 미약한 반면 이들 블렌드의 열분해에 따른 분자량 감소와 상호에스테르 교환반응을 촉진하여 추가적인 용융점도 감소를 초래함을 알 수 있었다.

• Fibers and Polymers
• /
• 제3권1호
• /
• pp.1-7
• /
• 2002

Cellulose carbonate was prepared by the reaction of cellulose pulp and $CO_2$ with treatment reagents, such as aqueous $Zncl_2$ (20-40 wt%) solution, acetone or ethyl acetate, at -5-$0^{\circ}C$ and 30-40 bar ($CO_2$) for 2 hr. Among the treatment reagents, ethyl acetate was the most effective. Cellulose carbonate was dissolved in 10% sodium hydroxide solution containing zinc oxide up to 3 wt% at -5-$0^{\circ}C$. Intrinsic viscosities of raw cellulose and cellulose carbonate were measured with an Ubbelohde viscometer using 0.5 M cupriethylenediamine hydroxide (cuen) as a solvent at $20^{\circ}C$ according to ASTM D1795 method. The molecular weight of cellulose was rarely changed by carbonation. Solubility of cellulose carbonate was tested by optical microscopic observation, UV absorbance and viscosity measurement. Phase diagram of cellulose carbonate was obtained by combining the results of solubility evaluation. Maximum concentration of cellulose carbonate for soluble zone was increased with increasing zinc oxide content. Cellulose carbonate solution in good soluble zone was transparent and showed the lowest absorbance and the highest viscosity. The cellulose carbonate and its solution were stable in refrigerator (-$5^{\circ}C$ and atmospheric pressure).

• Preventive Nutrition and Food Science
• /
• 제2권4호
• /
• pp.296-300
• /
• 1997

Glucose syrup and lactose, mixed with citric acid as a polymerizing catalyst, was processed using twin screw extruder, in which 40 of L/D(length/diameter) ratio was designed to provide sufficient retention in extruder for polymerization of sugars. The polymerization yields of glucose syrup were 36.90%, 55.44% and 77.10% at 160, 180 and 20$0^{\circ}C$, respectively, while those of lactose were 26.45%, 38.16% and 45.86% at the same temperatures. Gel permeation chromatography exhibited that the higher molecular weight fractions were increased with extrusion temperature, which also led to increasing hydrodynamic intrinsic viscosity. Both uco-oligosaccharides and lacto-oligosaccharides produced by extrusion of glucose syrup and lactose were stable for thermal treatments over a wide range of pH3.0~11.0. In addition, $\alpha$-amylase and amyloglucosidase treatment of gluco-oligosaccharides did not affect the solution viscosity, indicating the random linkage rather than $\alpha$-1, 4 linkages of glucose and thus the potential applications as a dietary fiber. In this research it was clearly observed that twin screw extrusion can be successfully utilized to produce gluco-oligosaccharides and lacto-oligosaccharides rapidly and continuously in conjunction with selective control of polymerized composition.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.611-614
• /
• 2003

p-KG03의 고유점도는 65.22 및 50.75 $d{\ell}/g$ 이며, 사슬강도성은 0.170이였고, 특성화 농도는 0.114 g/l이었다. p-KG03은 non-Newtonic fluid로 Power-Low Model에 의한 pseudoplastic한 물성을 갖으며, 유체성으로 p-KG03 1%의 constancy index (K)는 2,172 cp, flow behavior index (n)는 0.52이었다. 특히 pH, 염 및 열에 안정하며 기존 다당류와의 혼합이용 가능성이 있을 것으로 생각된다.

• 펄프종이기술
• /
• 제45권5호
• /
• pp.56-63
• /
• 2013

In this study, paper mill applicability of two kinds of cotton pulps which have different initial freeness, fiber length and intrinsic fiber strength were investigated. Basic properties such as CED viscosity, fiber length, and crystallinity of major two kinds of cotton pulps were analyzed, and beatability of cotton pulps and physical properties of handsheet made from two kinds of cotton pulps were compared. Laboratory beating was performed at different refining conditions such as refining loads and freenesses. Relationship between beating degree and physical properties of handsheet were compared to seek optimum condition of refining for different cotton pulps application to paper mill.

• 한국수산과학회지
• /
• 제37권1호
• /
• pp.1-6
• /
• 2004

In preparing sodium alginates from sea tangle (Laminaria japonica) powder using the Mexican process, alkaline extraction, conversion to alginic acid and reversion to sodium alginates were used to increase purity. The effect of hot water treatment and dialysis on measuring the average molecular weight of sodium alginates were investigated. Intrinsic viscosity and average molecular weight of sodium alginates after dialysis were higher than those before dialysis. Average molecular weight of sodium alginates treated with hot water was higher than that without. Hot treatment has little effect on the ash content of sodium alginates. Ash content of sodium alginates before dialysis were $27-30\%$ those after dialysis were $10\%.$ After dialysis, Na content was highest $(89-91\%),$ K was $11-12\%,$ Ca was $1.9\%,$ and Mg was $0.05\%.$ Ash content of alginates had little effect on average molecular weight. SAV (slope of apparent viscosity) of alginates solution after dialysis showed higher values than before. SAV of the alginates with hot water treatment were higher than without treatment.

• 한국세라믹학회지
• /
• 제31권2호
• /
• pp.220-226
• /
• 1994

The hydrolysis and condensation reactions in the mixed alkoxide solutions of Si(OC2H5)4 and Zr(O-nC3H7)4 with various water contents (1, 2, 4, and 8 in molar ratio to alkoxide, r) and catalysts were examined by rheological measurements and the number average molecular weight in order to explain the shape of the polymer in the mixed alkoxide solutions. It was found that fibers could be drawn in the viscosity range of 1∼100P from the acid-catalyzed solutions with lower water contents of the mole ratio H2O/alkoxide, r 2. On the other hand, crack free bulk gel was formed from the acid-catalyzed solutions including a large amount of water (r 4), and the base-catalyzed solutions. The relation between the intrinsic viscosity [{{{{ eta }}] and the number average molecular weight n, namely [{{{{ eta }}]=Knα, has shown that the acid-catalyzed spinnable solutions (r=1 and 2) have linear polymers and the exponent α's are about 0.56 and 0.81, whereas non-spinnable solutions (r=4 and 8) have three dimensional network polymers or spherical particles and the exponent α's are 0.41∼0.51 and 0.35.