• International Journal of Industrial Entomology and Biomaterials
• /
• v.27 no.2
• /
• pp.312-316
• /
• 2013

Caffeine is a thermogenic agent that can be used in weight loss products. In order to achieve a sustained release of caffeine, silk fibroin (SF) film was uses as carrier. It has been shown that the loading method of caffeine into SF film affected the uniform distribution of caffeine in the SF film. When caffeine was added directly into SF solution, gelation has been occurred immediately and prevented the uniform distribution of caffeine. On the other hand, caffeine was dissolved in methanol in order to load the caffeine in SF film and crystallize the SF film at the same time. However, due to the fast evaporation of methanol, caffeine was recrystallized on the surface of SF film rather than penetrating into the film. Finally, caffeine was loaded into pre-crystallized SF film and uniform distribution of caffeine could be achieved. There was an initial burst of caffeine during the first 15 min, but after that a sustained release was achieved.

• Tribology and Lubricants
• /
• v.15 no.1
• /
• pp.98-107
• /
• 1999

In this work the effect of pressure drop at inner film due to centrifugal forces acting on the lubricating fluid is investigated for static and dynamic characteristics of floating ring journal bearing. The momentum effect of oil supply into a inner film through oil feeding holes of floating ring on the bearing performance is also studied. It is compared the pressure drop effects and the momentum effect of oil supply into a inner film fur all bearing performance parameters. It is shown that some performance of floating ring bearings can be controled by the momentum of oil supply into a inner film.

• Journal of English Language & Literature
• /
• v.58 no.4
• /
• pp.565-588
• /
• 2012

This paper aims at reconsidering 'suture,' a key concept in early Lacanian film criticism, with a view to narrowing a supposed gap between early Lacanian and later Lacanian film criticism. Early Lacanian film theorists, among whom Jean-Pierre Oudart, Jean-Louis Baudry, Laura Mulvey and Daniel Dayan, to name a few, are prominent, focus on cinematic signifying system as well as its ideological effects on shaping subjectivity of the audience. Initiated by Jacques-Alain Miller's article on suture as the logic of signifier and grafted into film as the logic of the cinematic by Oudart's writing, the concept of suture was established as a key word in early Lacanian film criticism. In their taxonomy, suture refers to the processes by which the audience are stitched into the story-world of a film. The audience are drawn into the film and take up positions as subjects-within-the-film such that they make sense of and respond to what the film represents as they are encouraged to do so by the film itself. On the other hand, later Lacanian film critics, who are much influenced by Lacan's later emphasis on the Real, focus on concepts such as gaze, petit objet a, fantasy, rather than suture. They are more concerned with the failure of suture and the disruption of the Symbolic than the ideological effects of suture and the consolidation of the Symbolic. They require a break from the previous approach of Lacanian film theory which centers around the Imaginary and the Symbolic. However, early Lacanian and later Lacanian film theory do not manifest as much disparity as they are supposed to do, for both are against the ideological manipulation of suture. Slavoj Žižek, a leading scholar of later Lacanian psychoanalysis, revives the concept of suture as a patch of the Symbolic which covers the gap, if not always successful.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3
• /
• pp.472-479
• /
• 2013

We carried out research into an environmentally friendly injection molding process that involves filling the mold with polymer after thin films are fixed into the cavity, without the coating, plating process. Film insert injection molding is a new technique in which molten plastic resin is injected into the cavity after films are precisely attached to the side of the mold wall. In the film insert injection molding process, the insert film is moved by the flow of the molten plastic resin. Overlap defects cause a decline in the productivity and the quality of the manufactured goods. To reduce overlap defects, new injection mold parts are proposed to produce automotive exterior parts using thin films. It is suggested that the best possible method would be to fix the thin films to one side of the mold wall, and develop interior pins to fix the films in the mold. Based on this new pin fixing system, the problem of the film being moved by the flow of the molten resin was improved.

• Journal of Mechanical Science and Technology
• /
• v.16 no.3
• /
• pp.376-385
• /
• 2002

Spray impingement and fuel film formation models with cavitation have been developed and incorporated into the computational fluid dynamics code, STAR-CD. The spray/wall interaction process was modeled by considering the effects of surface temperature conditions and fuel film formation. The behavior of fuel droplets after impingement was divided into rebound, spread and splash using the Weber number and parameter K(equation omitted). The spray impingement model accounts for mass conservation, energy conservation, and heat transfer to the impinging droplets. The fuel film formation model was developed by integrating the continuity, momentum, and energy equations along the direction of fuel film thickness. Zero dimensional cavitation model was adopted in order to consider the cavitation phenomena and to give reasonable initial conditions for spray injection. Numerical simulations of spray tip penetration, spray impingement patterns, and the mass of film-state fuel matched well with the experimental data. The spray impingement and fuel film formation models have been applied to study spray/wall impingement in high-speed direct injection diesel engines.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.437-442
• /
• 1998

Film boiling is the heat transfer mechanism that can occurs when large temperature differences exist between a cold liquid and hot material. In the nuclear reactor safety analysis, film boiling has become an important issue in recent years. During severe accident, hot molten corium fall into relatively cool water, and fragment into spheres or sphere-like particles. If the steam explosion is triggered, the thermal energy of corium is converted into the mechanical energy that can threaten the integrity of reactor vessel or reactor cavity. One of the important concerns in the heat transfer analysis during pre-mixing stage is the film boiling heat transfer between the corium and water/steam two-phase flow. Until now, considerable works on film boiling heat been performed. However, there is no available correlation adequate for severe accident analysis. In this study, boiling heat transfer correlations have been developed, and their applicable ranges heat been enlarged and their prediction accuracy has been enhanced.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.204-206
• /
• 2009

Luminescent films were prepared by infiltration of tris(dibenzoylmethane) mono(1, 10-phenanthroline) europium incorporated ormosil into colloidal $SiO_2$ photonic crystal templates. The PL intensity of the infiltrated film into the template was about 13 times higher than that of the plane film prepared without the template.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.1
• /
• pp.38-45
• /
• 1999

Electrochemical lithium intercalation into a PECVD (plasma enhanced chemical vapour deposited) carbon film electrode was investigated in 1 M $LiPF_6-EC$ (ethylene carbonate) and DEC (diethyl carbonate) solution during lithium intercalation and deintercalation, by using cyclic voltammetry supplemented with ac-impedance spectroscopy. The size of the graphitic crystallite in the a- and c-axis directions obtained from the carbon film electrode was much smaller than those of the graphite one, indicating less-developed crystalline structure with hydrogen bonded to carbon, from the results of AES (Auger electron spectroscopy), powder XRD (X-ray diffraction) method, and FTIR(Fourier transform infra-red) spectroscopy. It was shown from the cyclic voltammograms and ac-impedance spectra of carbon film electrode that a threshold overpotential was needed to overcome an activation barrier to entrance of lithium into the carbon film electrode, such as the poor crystalline structure of the carbon film electrode showing disordered carbon and the presence of residual hydrogen in its structure. The experimental results were discussed in terms of the effect of host carbon structure on the lithium intercalation capability.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.919-924
• /
• 2000

Spray impingement model and fuel film formation model were developed and incorporated into the computational fluid dynamics code, STAR-CD. The spray/wall interaction process were modelled by considering the change of behaviour with surface temperature condition and fuel film formation. We divided behaviour of fuel droplets after impingement into stick, rebound and splash using Weber number and parameter K. Spray impingement model accounts for mass conservation, energy conservation and heat transfer to the impinging droplets. A fuel film formation model was developed by Integrating the continuity, the Navier-Stokes and the energy equations along the direction of fuel film thickness. The validation of the model was conducted using diesel spray experimental data and gasoline spray impingement experiment. In all cases, the prediction compared reasonably well with experimental results. Spray impingement model and fuel film formation model have been applied to a direct injection diesel engine combustion chamber.

• Korean Institute of Interior Design Journal
• /
• no.33
• /
• pp.62-67
• /
• 2002

Architecture and Film have been interested in each other since 1895. This concern manifests various aspects and is continued up to now. If we examine into detail of relationship between film and architecture, those share the integration of time and space as the art of time and space. Film makes inexpressible time into space by showing the change of space in the issue that is the merger of time and space. Then, this is the issue of movement that compiling element was intervened. And the creative space of film which is the timely expression stimulates the person to experience whole form through spatial experience. Consequently, the architecture as an image maker must be developed through a research about film as an image creator. Also a discussion about film and architecture do not apply one to the other but must be focused on the mutual relationship.