• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.1
• /
• pp.13-34
• /
• 2022

Soil moisture data have been collected at 11 agrometeorological stations operated by The Korea Meteorological Administration (KMA). This study aimed to verify the accuracy of soil moisture data of KMA and develop a correction formula to be applied to improve their quality. The soil of the observation field was sampled to analyze its physical properties that affect soil water content. Soil texture was classified to be sandy loam and loamy sand at most sites. The bulk density of the soil samples was about 1.5 g/cm³ on average. The content of silt and clay was also closely related to bulk density and water holding capacity. The EnviroSCAN model, which was used as a reference sensor, was calibrated using the self-manufactured "reference soil moisture observation system". Comparison between the calibrated reference sensor and the field sensor of KMA was conducted at least three times at each of the 11 sites. Overall, the trend of fluctuations over time in the measured values of the two sensors appeared similar. Still, there were sites where the latter had relatively lower soil moisture values than the former. A linear correction formula was derived for each site and depth using the range and average of the observed data for the given period. This correction formula resulted in an improvement in agreement between sensor values at the Suwon site. In addition, the detailed approach was developed to estimate the correction value for the period in which a correction formula was not calculated. In summary, the correction of soil moisture data at a regular time interval, e.g., twice a year, would be recommended for all observation sites to improve the quality of soil moisture observation data.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.15-24
• /
• 2021

This study is about the introduction and usefulness evaluation of the manufacturing method of the bolus-helmet. Helmet-production for the treatment of scalp tumor patients has been tried and will continue in many creative and various ways. However, Most of the research data did not significantly reduce the psychological burden and physical and physical discomfort that the patient had to bear due to the time and economic cost required for the production of the helmet, the convenience of production, and the complexity of the process. In addition, recently, studies using more advanced technologies and equipment such as 3D-printer technology, which are being studied as a way to increase the treatment effect, are being introduced, but the time, economic cost, and psychological and physical burden are still the sole responsibility of the patient. Isn't it getting worse? The reality is that the thoughts of concern cannot be erased. Therefore, by maintaining the physical properties of the bolus and manufacturing a helmet without incurring additional costs, the physical and physical discomfort aggravated to the patient was reduced and the procedure and time for helmet manufacturing were minimized. In this way, it was possible to reduce the time, economic cost, and physical discomfort required for the production of the helmet, and it was also possible to minimize the psychological burden of the patient, although it is invisible. Additionally, in evaluating the usefulness of helmets, we are able to continuously seek and develop ways to reduce the air-gap interval, and as a result, we will be able to introduce a method to keep it within 2.0mm along with the manufacturing method through this study. I feel very welcome. Finally, I hope that anyone working in the Department of Radiation Oncology will be able to easily manufacture the helmet required for radiation therapy using a bolus through the guide-line on helmet manufacturing provided by this institute. I hope and hope that if you have any questions or inquiries that arise during the production process, please feel free to contact us through the researcher's e-mail or mobile phone at any time.

• Journal of Korea Port Economic Association
• /
• v.37 no.4
• /
• pp.161-173
• /
• 2021

The shipping industry plummeted and was depressed due to the global economic crisis caused by the bankruptcy of Lehman Brothers in the US in 2008. In 2020, the shipping market also suffered from a collapse in the unstable global economic situation due to the COVID-19 pandemic, but unexpectedly, it changed to an upward trend from the end of 2020, and in 2021, it exceeded the market of the boom period of 2008. According to the Clarksons report published in May 2021, the decrease in cargo volume due to the COVID-19 pandemic in 2020 has returned to the pre-corona level by the end of 2020, and the tramper bulk carrier capacity of 103~104% of the Panamax has been in the ports due to congestion. Earnings across the bulker segments have risen to ten-year highs in recent months. In this study, as factors affecting BDI, the capacity and congestion ratio of Cape and Panamax ships on the supply side, iron ore and coal seaborne tonnge on the demand side and Granger causality test, IRF(Impulse Response Function) and FEVD(Forecast Error Variance Decomposition) were performed using VAR model to analyze the impact on BDI by congestion caused by strengthen quarantine at the port due to the COVID-19 pandemic and the loading and discharging operation delay due to the infection of the stevedore, etc and to predict the shipping market after the pandemic. As a result of the Granger causality test of variables and BDI using time series data from January 2016 to July 2021, causality was found in the Fleet and Congestion variables, and as a result of the Impulse Response Function, Congestion variable was found to have significant at both upper and lower limit of the confidence interval. As a result of the Forecast Error Variance Decomposition, Congestion variable showed an explanatory power upto 25% for the change in BDI. If the congestion in ports decreases after With Corona, it is expected that there is down-risk in the shipping market. The COVID-19 pandemic occurred not from economic factors but from an ecological factor by the pandemic is different from the past economic crisis. It is necessary to analyze from a different point of view than the past economic crisis. This study has meaningful to analyze the causality and explanatory power of Congestion factor by pandemic.

• Korean Journal of Plant Resources
• /
• v.35 no.5
• /
• pp.652-658
• /
• 2022

This study was conducted to induce somatic embryogenic callus (SEC) derived from petals in rose. The petal explants of 3 cultivars ('Ice Wing', 'Orange Eye' and 'Pink Beauty') with different flower colors were placed on three types media (MS, SH and WPM) supplemented with 11 mg/L 2,4-D, respectively, and then cultured in the dark for 47 days. Calluses were formed at explants of all three cultivars. Also, 'Ice Wing', which were cultured in the SH as the basal medium, showed the highest callus formation rate. However, somatic embryos were generated from only petal-derived callus of 'Ice Wing', which were induced on the WPM as the basal medium, transferred it to SH basal medium supplemented with 3 mg/L 2,4-D, and 300 mg/L L-proline, and cultured for 5 weeks. The SEC has been proliferated every four weeks at the subculture interval. In addition, as a results of making a comparison of expression of RhSERK3 and RhSERK4, which is used as signal for generation of somatic embryo from callus in rose, between the SEC and petal-derived callus from 'Ice Wing' by RT-qPCR, the former showed 10 times higher RhSERK3 expression and 700 times higher RhSERK4 expression than the latter.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.6
• /
• pp.853-860
• /
• 2022

The purpose of this study is to suggest an improvement plan for the calculation method of the engineer standard wage rate (ESWR) and to compute a reasonable ESWR. To this end, an adequacy review of theESWR calculation criteria was conducted along with an extensive engineering industry survey. The survey results were analyzed using an effective response sample of 748 companies out of 1,000 survey samples extracted by stratifying the 5,879 survey population. The main results were as follows. ①When calculating the engineering service fee, the prime contractor's engineer wage is suitable for the ESWR. The ESWR can be estimated by the formula 'average wage÷[1-proportion of subcontract orders×(1-subcontract rate)].' ② The field survey showed that the number of monthly working days was 20.35-20.54 days at 99 % confidence interval, which was significantly different from the current standard (22 days). In addition, as a result of a legal review of the ESWR criteria, it was found that the number of working days should be calculated in accordance with the Labor Standards Act after 2022. ③ Applying government guidelines, the time difference between the wage survey and the ESWR application can be corrected by the past ESWR increase rate for a specific period. ④ Using modeling based on the analysis above, the current ESWR was 13.5-14.5 % lower than the appropriate level. A lower ESWR was driven by the non-reflection of subcontract structure (4.1 %), overestimation of monthly work days (6.8-7.8 %), and application of past wage (2.6 %). The proposed model is expected to be widely used in policy making, as it can provide a useful framework for calculating the standard wage rate in similar industries as well as calculating appropriate engineering fees.

• Journal of The Korean Association For Science Education
• /
• v.42 no.3
• /
• pp.371-381
• /
• 2022

This study causally investigates whether high school student with high science learning motivation becomes to achieve more or vice versa, and also how those two factors affect STEM career motivation. Research participants were 1st year students in a high school at Seoul. We surveyed their science learning motivation three times in the same time interval in the fall semester of 2021, and once a STEM career motivation in the third period. We collected data from 171 students with their mid-term and final exam scores, with which, we constructed and fitted an autoregressive cross-lagged model. The research model shows high measurement stability and fit indices. All the autoregressive and cross-lagged paths were statistically significant. However, standardized regression coefficients were larger in path from motivation to achievement compared to the opposite. Only science learning motivation shows significant direct effect on STEM career motivation, rather than achievement. For indirect effects, the first science learning motivation affected the final exam score and STEM career motivation, and the final exam score affected STEM career motivation. However, the final exam score did not have a total effect toward STEM career motivation. The result of this study shows reciprocal and cyclic causality between science learning motivation and achievement - in comparison, the effect of motivation for the opposite is larger than that of achievement. Also the result of this study strongly reaffirms the importance of science learning motivation. Instructional implications for strengthening science learning motivation throughout a semester was discussed, and a study for the longitudinal effect of science learning motivation and achievement in high school student toward future STEM vocational life was suggested.

• Korean Journal of Culture and Social Issue
• /
• v.28 no.2
• /
• pp.187-217
• /
• 2022

The aim of this study is to examine the psychometric properties of the Korean version of the Post-traumatic Stress Disorder Checklist for DSM-5(PCL-5). For this purpose, online surveys were conducted for two times with a one year interval using the data from 1,077 Korean adults at time 1, and 563 Korean adults at time 2. First, from the result of the confirmatory factor analysis, comparing the model fit of the 1, 4, 6, and 7-factor model, the 4, 6, and 7-factor model showed a acceptable fit, and the best fit was seen in the order of the 7, 6, 4-factor model. Second, the internal consistency, omega coefficient, construct validity, average variance extracted, and test-retest reliability results were all satisfactory.. Third, a correlation analysis with the K-PC-PTSD-5 and the sub-factors of BSI-18 was conducted to check the validity of the Korean Version of PCL-5. As a result, a positive correlation was seen with both K-PC-PTSD-5 and BSI-18. Fourth, a hierarchical multiple regression was performed to examine whether the Korean Version of PCL-5 predicts future PTSD, depression, anxiety, and somatization. As a result, the Korean Version of PCL-5 measured at time 1 significantly predicted PTSD, depression, anxiety, and somatization symptoms at time 2. Fifth, by analyzing the ROC curve, the discriminant power of PCL-5 for screening PTSD symptom groups was confirmed, and the best cut-off score was suggested. As a result of the longitudinal validation of Korean version of PCL-5, it was found that this scale is a reliable and valid measure for Korean adults. By looking into the predictive validity of the scale, it was found that the Korean version of PCL-5 can predict not only PTSD symptoms but also PTSD-related symptoms such as depression, anxiety, and somatization. Also, this study differs from previous validation studies measuring PTSD symptoms in that it suggested a cut-off score to help differentiate PTSD symptom groups.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.1
• /
• pp.76-83
• /
• 1984

This experiment was performed to investigate the flowering habit of sesame (Sesamum indicum L.). Sesame varieties tested could be classified into 8 different plant types by their morphological traits such as capsule shape, capsule setting habit and branching types among sesame gene pool of Crop Experiment Station, ORD. The first flower was appeared at the lowest node on main stem. Flowers were appeared progressively toward the tip of the main stem and also toward the tips of branches. The interval of flowering for a node was about one day, but 3 to 8 days for the flowers on the tips. Side flowers started at 4 to 5 nodes lower than those of center flower at the same day. Flowers were beared 2 by 1 node on the middle part of flower setting node (7-9) in mono capsule setting habit in spite of its normal is 1 by 1 node on the other nodes. Flowers were beared opposite direction on each node of stem and flowering toward the tip of main stem composed of cross shape between nodes and spiral, reverse of clockwise direction. We called this habit as cross spiral flowering order and cross spiral phyllotaxis. The first flower on branches was appeared when center flower on the 5th node of main stem began to flower. The branches produced at higher nodes on main stem showed larger flowering periods and more number of flowers than that at lower parts. BTB (Branch, Tricapsule, Bicarpels, 4 Loculi) type showed three capsule setting habits and same flowering period both on main stem and branches while BTQ (Branch, Tricapsule, Quadricarpels, 8 Loculi) type showed three capsule setting habit on main stem and mono-capsule setting habit on branches. In BTQ type, the period of flowering was much shorter on branches than on main stem. Branching type was considered more promising than non branching type for the breeding of early maturing high yielding variety because branching type has the advantage of bearing a lot of flowers in comparatively short flowering period.

• Journal of Nutrition and Health
• /
• v.56 no.2
• /
• pp.155-167
• /
• 2023

Purpose: This study investigates the association between seafood consumption and frailty according to gender in the Korean elderly. Methods: Cross-sectional data from the Seventh (2016-2018) Korea National Health and Nutrition Examination Survey was procured for this study. Data from 3,675 subjects (1,643 men and 2,032 women) aged ≥ 65 years were analyzed. Levels of seafood intake were assessed by a one-day 24-hour dietary recall, and subjects were classified into three tertiles by gender according to frailty phenotype: robust, pre-frail, and frail. Multinomial logistic regression analysis was performed to clarify the association between seafood consumption and frailty for each gender. Results: The prevalence of frailty was determined as 13.4% for men and 29.7% for women. Participants with a higher seafood intake had higher intakes of grains, fruits, and vegetables, while the intake of meat was significantly lower. In both men and women, the group with higher seafood intake showed higher energy and micronutrient intakes. The frail prevalence and frailty score were significantly low in the highest tertiles of seafood consumption compared to the lowest tertile in men and women (p < 0.001). After adjusting for confounder, the highest tertile of seafood consumption showed a decreased risk of frailty compared to the lowest tertile only in women (hazard ratio [HR], 0.50; 95% confidence interval [CI], 0.32-0.78; p-trend = 0.008 vs. HR, 0.52; 95% CI, 0.32-0.83; p-trend = 0.008; respectively). Conclusion: Results of this study suggest that seafood consumption potentially decreases the risk of frailty in the elderly.

• Korean Journal of Community Nutrition
• /
• v.28 no.1
• /
• pp.38-47
• /
• 2023

Objectives: This study examined the association between the experience of disease management education and the use of nutrition labels according to the sociodemographic characteristics and health behaviors of people diagnosed with hypertension and diabetes living in the community. Methods: Among the participants from the Community Health Survey (2018), 74,283 individuals diagnosed with hypertension or diabetes were included in the study population. According to gender, this study evaluated nutrition label use by the experience of disease management education, individual sociodemographic characteristics, and health behavior. Finally, using multiple logistic regression analysis, the association between disease management education and nutrition labels was calculated using the odds ratio (OR) and 95% confidence interval (CI). Results: Males (24.5%) experienced more disease management education than females (22.6%). In addition, younger age, higher education level, and higher equalized personal income experienced more disease management education (P < 0.001). The educational experience rate was higher in the male subjects who did not smoke or were involved in high-risk alcohol consumption (P < 0.001). In addition, the rate of disease management education experience was significantly higher for both men and women who exercised by walking (P < 0.001). The use of nutrition labels was higher in females (9.9%) than males (5.8%), and both males and females were significantly higher in young age, high education, high income, and professional and office positions (P < 0.001). The utilization rate of nutrition labels was high in non-smoking male subjects and high-risk-drinking female subjects. In addition, the utilization rate of nutrition labels was significantly higher in males and females who exercised by walking and those who experienced disease management education (P < 0.001). After adjusting for individual sociodemographic characteristics, health behavior, and disease management education, the use of nutrition labels was high among females (OR 3.19, 95% CI 2.85-3.58), high income (Q4; OR 1.62, 95% CI 1.41-1.87, Q5; OR 1.58, 95% CI 1.37-1.84) and highly educated (high school; OR 2.87, 95% CI 2.62-3.14, above college; OR 5.60, 95% CI 5.02-6.23) while it was low in the elderly (OR 0.43, 95% CI 0.40-0.47), and economically inactive (OR 0.86, 95% CI 0.76-0.96). The use of nutrition labels was high in non-smokers (OR 1.29, 95% CI 1.13-1.48), nonhigh-risk drinkers (OR 1.22, 95% CI 1.08-1.38), and subjects who exercised walking (OR 1.44, 95% CI 1.34-1.54). There was no difference in the utilization rate of nutrition labels according to obesity, and the utilization rate of nutrition labels was significantly higher in subjects who had experienced disease education (OR 1.34, 95% CI 1.24-1.44). Conclusions: Education on the use of nutrition labels, which contributes to food selection for healthy eating, might be a tool for dietary management. Moreover, the utilization rate can be a good indicator for predicting the proportion of the population practicing the guide for disease management. Improving the utilization rate of nutrition labels through disease management education can be a useful intervention for people with chronic diseases who need healthy eating habits for disease management and preventing complications, particularly those diagnosed with hypertension and diabetes.