• Hip & pelvis
• /
• v.35 no.3
• /
• pp.175-182
• /
• 2023

Purpose: This study aims to compare patients in whom fixation failure occurred via cut-out (CO) or cut-through (CT) in order to determine patient factors and radiographic parameters that may be predictive of each mechanism. Materials and Methods: This retrospective cohort study includes 18 patients with intertrochanteric (IT) hip fractures (AO/OTA classification 31A1.3) who underwent treatment using a single lag screw design intramedullary nail in whom fixation failure occurred within one year. All patients were reviewed for demographics and radiographic parameters including tip-to-apex distance (TAD), posteromedial calcar continuity, neck-shaft angle, lateral wall thickness, and others. Patients were grouped into cohorts based on the mechanism of failure, either lag screw CO or CT, and a comparison was performed. Results: No differences in demographics, injury details, fracture classifications, or radiographic parameters were observed between CO/CT cohorts. Of note, a similar rate of post-reduction TAD>25 mm (P=0.936) was observed between groups. A higher rate of DEXA (dual energy X-ray absorptiometry) confirmed osteoporosis (25.0% vs. 60.0%) was observed in the CT group, but without significance. Conclusion: The mechanism of CT failure during intramedullary nail fixation of an IT fracture did not show an association with clinical data including patient demographics, reduction accuracy, or radiographic parameters. As reported in previous biomechanical studies, the main predictive factor for patients in whom early failure might occur via the CT effect mechanism may be related to bone quality; however, conduct of larger studies will be required in order to determine whether there is a difference in bone quality.

• Journal of Biomedical Engineering Research
• /
• v.24 no.5
• /
• pp.401-410
• /
• 2003

This study investigates the biomechanical efficacies of various cement augmentation techniques with or without pressurization for varying degrees of osteoporotic femur. For this study, a biomechanical analysis using a finite element method (FEM) was undertaken to evaluate surgical procedures, Simulated models include the non-cemented(i.e., hip screw only, Type I), the cement-augmented(Type II), and the cemented augmented with pressurization(Type III) models. To simulate the fracture plane and other interfacial regions, 3-D contact elements were used with appropriate friction coefficients. Material properties of the cancellous bone were varied to accommodate varying degrees of osteoporosis(Singh indices, II∼V). For each model. the following items were analyzed to investigate the effect surgical procedures in relation to osteoporosis of varying degrees : (a) von Mises stress distribution within the femoral head in terms of volumetric percentages. (b) Peak von Mises stress(PVMS) within the femoral head and the surgical constructs. (c) Maximum von Mises strain(MVMS) within the femoral head, (d) micromotions at the fracture plane and at the interfacial region between surgical construct and surrounding bone. Type III showed the lowest PVMS and MVMS at the cancellous bone near the bone-construct interface regardless of bone densities. an indication of its least likelihood of construct loosening due to failure of the host bone. Particularly, its efficacy was more prominent when the bone density level was low. Micromotions at the interfacial surgical construct was lowest in Type III. followed by Type I and Type II. They were about 15-20% of other types. which suggested that pressurization was most effective in limiting the interfacial motion. Our results demonstrated the cement augmentation with hip screw could be more effective when used with pressurization technique for the treatment of intertrochanteric fractures. For patients with low bone density. its effectiveness can be more pronounced in limiting construct loosening and promoting bone union.

• Journal of Biomedical Engineering Research
• /
• v.26 no.2
• /
• pp.123-127
• /
• 2005

Compression Hip Screw (CHS) is one of the most widely-used prostheses for the treatment of intertrochanteric fractures because of its strong fixation capability. Fractures at the neck and screw holes are frequently noted as some of its clinical drawbacks, which warrant more in-depth biomechanical analysis on its design variables. The purpose of this study was to evaluate changes in the strength with respect to the changes in design such as the plate thickness and the number of screw holes. Both mechanical test and FEM analysis were used to systematically investigate the sensitivities of the above-mentioned design variables. For the first part of the mechanical test, CHS (n=20) were tested until failure. The CHS specimens were classified into four groups: Group Ⅰ was the control group with the neck thickness of 6-㎜ and 5 screw holes on the side plate, Group Ⅱ 6-㎜ thick and 8 holes, Group Ⅲ 7.5-㎜ thick and 5 holes, and Group Ⅳ 7.5-㎜ thick and 8 holes. Then, the fatigue test was done for each group by imparting 50% and 75% of the failure loads for one million cycles. For the FEM analysis, FE models were made for each group. Appropriate loading and boundary conditions were applied based on the failure test results. Stresses were assessed. Mechanical test results indicated that the failure strength increased dramatically by 80% with thicker plate. However, the strength remained unchanged or decreased slightly despite the increase in number of holes. These results indicated the higher sensitivity of plate thickness to the implant strength. No fatigue failures were observed which suggested the implant could withstand at least one million cycles of fatigue load regardless of the design changes. Our FEM results also supported the above results by showing a similar trend in stress as those of mechanical test. In summary, our biomechanical results were able to show that plate thickness could be a more important variable in design for reinforcing the strength of CHS than the number of screw holes.

• The Journal of the Korean bone and joint tumor society
• /
• v.12 no.2
• /
• pp.126-130
• /
• 2006

Liposclerosing myxofibrous tumor (LSMFT) is a fibro-osseous lesion of the bone with a marked predilection for the intertrochanteric region of the proximal femur. It is characterized by a complex mixture of histological elements including fibrous dysplasia-like features, myxofibrous tissue, lipomatous area, ischemic ossification, xanthoma cells and pseudo-Paget's bone. Though some consider LSMFT as a variant of the fibrous dysplasia, intraosseous lipoma, or other benign osseous lesions, recently LSMFT is emerged as a genuine clinicopathologic entity. We experienced a 48-year female patient with typical histologic and radiologic findings of LSMFT. It was located at the intertrochanteric area of the femur. Radiologically, the lesion was radiolucent and ground-glass appearance with sclerotic rim in the plain film and magnetic resonance imaging. Histologically, myxofibrous tissue, lipomatous area and fibrous dysplasia-like features were predominant findings.

• Journal of Yeungnam Medical Science
• /
• v.40 no.2
• /
• pp.212-217
• /
• 2023

We report a case of transient osteoporosis of the hip with a femoral neck fracture found during follow-up. A 53-year-old man presented with left hip pain without trauma. The pain did not improve after 2 weeks and he was brought to our hospital by ambulance. Magnetic resonance imaging (MRI) of the left hip joint showed diffuse edema in the bone marrow, which was identified by low signal intensity on T1-weighted images, high signal intensity on T2-weighted images, and increased signal intensity on short tau inversion recovery. This edema extended from the femoral head and neck to the intertrochanteric area. He was diagnosed with transient osteoporosis of the left hip. Rest gradually improved his pain; however, 3 weeks later, his left hip pain worsened without trauma. X-ray, computed tomography, and MRI results of the hip joint demonstrated a left femoral neck fracture, and osteosynthesis was performed. Differential diagnoses included avascular necrosis of the femoral head, infection, complex regional pain syndrome, rheumatoid arthritis, leukemia, and other cancers. Transient osteoporosis of the hip generally has a good prognosis with spontaneous remission within a few months to 1 year. However, a sufficient length of follow-up from condition onset to full recovery is necessary to avoid all probable complications such as fractures.

• The Journal of the Korean bone and joint tumor society
• /
• v.1 no.1
• /
• pp.45-51
• /
• 1995

The incidence of metastatic bony lesion has been increased recently, with the advanced therapeutic modalities of malignant tumors. The purpose of this study was to evaluate the effectiveness of surgical treatment in impending or established pathologic fractures due to metastasis in extremity. From 1981 to 1992, thirty two patients who had established or impending pathologic fractures in extremity had been treated surgically. The locations of metastasis, were lower extremity in 24 cases(femsral head and neck;5, intertrochanteric;7, subtrochanteric;8, femoral shaft;4) and upper extremity in 8 cases(proximal humerus;2, humoral shaft;6). The method of surgery was excision of tumor mass and rigid internal fixation to allow immediate mobilization, except 2 cases of amputation. The results were analysed by two criteria. The first was the grade of performance status that was made by modification of Functional Classification of New York Heart Association. The second was the degree of pain relief. The performance status was improved at least one grade in all patients and the mean improvement was 1.7 grades. The satisfactory pain relief was achieved in 81% of patients. Postoperatively, most of the patients had only slight to moderate limitation of physical activities and they became comfortable at rest and ordinary activities. The solitary metastatic lesions showed better pain relief(92%) than multiple metastasis(75%). The curative surgery was done in 3 cases, and they showed more than 24 months of disease-free survival.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1172-1175
• /
• 2004

At present, CHS(Compression Hip Screw) is one of the best prosthesis for the intertrochanteric fracture. There is nothing to evaluate the CHS itself with the finite element analysis and mechanical tests. They have same ways of the experimental test of the ASTM standards. The purpose of this study is to evaluate the existing CHS and the new CHS which have transformational design factors with finite element analysis and mechanical tests. The mechanical tests are divided into compression tests and fatigue test for evaluating the failure load, strength and fatigue life. This finite element method is same as the experimental test of the ASTM standards. Under 300N of compression load at the lag screw head. There are less differences between Group (5H, basic type) and Group which has 8 screw holes. However, there are lots of big differences between Group and Group which is reinforced about thickness of the neck range. Moreover, the comparison of Group and Group shows similar tendency of the comparison of Group and Group . The Group is reinforced the neck range from Group. After the experimental tests and the finite element analysis, the most effective design factor of the compression hip screws is the reinforcement of the thickness, even though, there are lots of design factors. Moreover, to unite the lag screw with the plate and to analyze by static analysis, the result of this method can be used with experimental test or instead of it.

• Journal of Korean Foot and Ankle Society
• /
• v.6 no.1
• /
• pp.21-27
• /
• 2002

Pressure sores are an ulceration and necrosis of the skin and underlying tissue usually occur after prolonged or repeated pressure by interruption of blood flow from the small. vessels to the skin and deep tissue. The management of pressure sores is mostly difficult and requires prolonged hospitalization or repeated surgical interventions with a high recurrence rate. In this article we reviewed 14 cases of National Pressure Ulcer Advisory Pannel staging III, IV over the lateral malleolar area of the ankle in 2 years period from January 1999 to October 2001. The pressure over lateral malleolar area was mainly due to unique Korean sitting position with cross legs at flexed hips and knees or supine position of patient with external rotation of low extremity. Male to female ratio was 11: 3 and ages were between 36 and 83 (mean age: 67.1 years). Associated diseases were DM(7 cases), Hemiparesis caused by CVA(2 cases), Liver cirrhosis(2 cases), disarticulation of opposite hip due to squamous cell ca.(1 case), Intertrochanteric Fx.(1 case). Wound cultures reported Staphylococus, Pseudomonas and others. Abnormally elevated ESR and CRP were seen in 6 cases. Operative treatments were irrigation and debridement, direct closure with gravity drainage and skin grafting. The most important aspect of pressure sore treatment is pressure relief of the lateral malleolar area. Pressure-relieving Cast or Brace was helpful for local management and preventing recurrence.

• Journal of Trauma and Injury
• /
• v.26 no.3
• /
• pp.125-130
• /
• 2013

Purpose: This study was undertaken in order to identify the characteristics of patients diagnosed with occult an hip fracture after hip trauma. Methods: We retrospectively reviewed the medical records and radiology reports of all patients who underwent hip skeletal computed tomography (CT) for suspected hip fractures but had normal initial X-rays after hip trauma between August 2006 and January 2012. The variables evaluated included age, gender, body mass index (BMI), accident mechanism, previous fracture, independence, late presentation, ability to bear weight, pain on passive rotation, tenderness of the groin area, diagnosis and treatment. Patients were divided into two groups, with hip fracture (occult hip fracture group) and without hip fracture (no fracture group) to evaluate the characteristics associated with an occult hip fracture. Results: The patients, a total of 139, had a mean age of 58.3 years and included 72 male patients(51.8%). The occult hip fracture group included 43 patients(30.9%). Of those 43, 21 patients(48.8%) had intertrochanteric or trochanteric fractures, 8 patients(18.6%) had femur neck fractures and 14 patients(32.6%) had acetabular fractures. Of the 43, 15 patients(34.9%) needed operative treatment. Age was higher in the occult hip fracture group than it was in the no fracture group($64.4{\pm}19.1$ years vs. $55.5{\pm}23.6$ years, p=0.021). A previous fracture was associated with the presence of a new fracture (p=0.014; OR=3.971, 95% CI=1.314-11.997). Conclusion: Further evaluation of patients who are older or have history of fractures is prudent, even though the initial X-rays are normal.

• Hip & pelvis
• /
• v.34 no.1
• /
• pp.10-17
• /
• 2022

Purpose: This study was conducted in order to assess changes in hip muscles by comparing results of preoperative and postoperative computed tomography (CT) in older patients who underwent surgery for treatment of hip fracture. Materials and Methods: A total of 50 patients (aged ≥65 years) who underwent surgery for treatment of intertrochanteric fractures (25 patients) and femoral neck fractures (25 patients) between February 2013 and February 2019 and underwent preoperative and postoperative pelvic CT were enrolled in the study. The cross-sectional area, attenuation and estimates of muscle mass of the gluteus medius, gluteus minimus, iliopsoas, and rectus femoris on the uninjured side were measured. Basic patient data (sex, age, height, weight, body mass index [BMI], bone mineral density [BMD], Harris hip score [HHS], and length of follow-up) were collected from medical records. Results: No significant differences in sex, age, height, weight, BMI, BMD, HHS, and length of follow-up were observed between the two groups. No significant difference in the cross-sectional areas and attenuations of gluteus medius and gluteus minimus was observed after surgery; however, a statistically significant decrease was observed in those of iliopsoas and rectus femoris after surgery. Lower estimates with statistical significance of muscle mass of the iliopsoas and rectus femoris were observed on postoperative CT. Conclusion: Muscle mass of the hip flexor (iliopsoas, rectus femoris) showed significant decreases on postoperative CT compared with preoperative CT. Based on these findings, selective strengthening exercise for hip flexor should be beneficial in rehabilitation of hip fractures.