• 한국CDE학회논문집
• /
• 제6권2호
• /
• pp.101-110
• /
• 2001

The maximum intersection of spherical convex polygons are to find spherical regions owned by the maximum number of the polygons, which is applicable for determining the feasibility in manufacturing problems such mould design and numerical controlled machining. In this paper, an efficient method for partitioning a sphere with the polygons into faces is presented for the maximum intersection. The maximum intersection is determined by examining the ownerships of partitioned faces, which represent how many polygons contain the faces. We take the approach of edge-based partition, in which, rather than the ownerships of faces, those of their edges are manipulated as the sphere is partitioned incrementally by each of the polygons. Finally, gathering the split edges with the maximum number of ownerships as the form of discrete data, we approximately obtain the centroids of all solution faces without constructing their boundaries. Our approach is analyzed to have an efficient time complexity Ο(nv), where n and v, respectively, are the numbers of polygons and all vertices. Futhermore, it is practical from the view of implementation since it can compute numerical values robustly and deal with all degenerate cases.

• Archives of Plastic Surgery
• /
• 제33권4호
• /
• pp.469-473
• /
• 2006

Purpose: The transverse rectus abdominis myocutaneous(TRAM) flap has become a reliable method for autogenous breast reconstruction. However, dissection of the tendinous intersections of rectus abdominis is technically difficult. The tendinous intersection has significant vascularity within its fascial layers raising in importance of technique in elevation. If tendinous intersections are damaged during the elevation of the rectus muscle, circulation to TRAM flap can be endangered. The purpose of this study is to evaluate the number of tendinous intersections and to predict anatomical position of the tendinous intersections. Methods: We dissected 182 consecutive TRAM flaps and measured the distance between xiphoid process and each tendinous intersection and evaluated the statistic correlation among the distance, patient's height and position of umbilicus. Results: In this study, in 30.7% of patients, two tendinous intersections were observed in one rectus abdominis muscle, in 67.7% three tendinous intersections, and in 1.6% four tendinous intersections, respectively. But there was no correlation between patient's height and the distance between xiphoid process and each tendinous intersection. Conclusion: It still remains difficult to predict the position of tendinous intersections just by topography before the dissection. Careful and meticulous dissection of the tendinous intersections is still required.

• 한국전자통신학회논문지
• /
• 제12권6호
• /
• pp.1189-1196
• /
• 2017

본 연구의 목적은 교차로 신호등 영상과 신호현시 영상을 하나의 영상정보로 통합 하여 중앙센터로 전송하는 방식이다. 시스템은 교차로 영상과 신호현시 영상을 수집하여 하나의 영상으로 통합하여 중앙센터에 전송 저장한다. 이 시스템은 사고발생시 사고정보를 즉시 전파하고 사고 원인을 규명하고 분쟁을 해결하는데 소요되는 시간을 줄임으로써 2차 사고를 예방하는데 효과적 일 것으로 예상된다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.907-910
• /
• 1993

This paper describes the use of fuzzy control and decision making to simulate the control of traffic flow at an intersection. To show the value of fuzzy logic as an alternative method for control of traffic environments. A traffic environment includes the lanes to and from an intersection, the intersection, vehicle traffic, and signal lights in the intersection. To test the fuzzy logic controller, a computer simulation was constructed to model a traffic environment. A typical cross intersection was chosen for the traffic environment, and the performance of the fuzzy logic controller was compared with the performance of two different types of conventional control. In the hardware verifications, fuzzy logic was used to control acceleration of a model train on a circular path. For the software experiment, the fuzzy logic controller proved better than conventional control methods, especially in the case of highly uneven traffic flow between different directions. On the hardware si e of the research, the fuzzy acceleration control system showed a marked improvement in smoothness of ride over crisp control.

• 한국산학기술학회논문지
• /
• 제7권6호
• /
• pp.1142-1148
• /
• 2006

실제적으로, 현재의 교통사고 검지시스템은 주로 교차로에서의 영상정보와 디지털 영상처리기술에만 거의 의존하고 있기 때문에 교차로에서의 혼잡한 상황하에서는 정확한 판별의 제한이 잔존하고 있다. 이러한 문제점을 보완하기 위하여, 본 논문은 교차로에서의 교통사고 자동검지율의 향상을 위해 검토되어야 할 사고음의 음향특성을 분석함으로써 현재 기술수준과 실현가능성을 가늠해 보는 것을 목적으로 한다. 교차로 주변에 차량의 소통이 거의 없을 때는 자동차사고 스키드음은 1[KHz]$\sim$3[KHz] 대역에서 특정패턴을 보였다. 또한, 차량 충돌음의 주파수 대역은 500[Hz]이하에서 사고가 발생하지 않은 시점보다 높은 30[dB] 이상의 음압차이를 보였다.

• 한국도로학회논문집
• /
• 제16권1호
• /
• pp.91-98
• /
• 2014

PURPOSES : Recently, there are increasing bicycle accidents along with increasing bicycles users. Bicycle accidents occurred frequently by perpendicular collision form at intersection inner. In order to improve safety of bicycle, drivers need to be aware of bicycles on the road and intersection geometric designs need to be designed to reduce risk associated with collisions between bicycles and car. This study aims to review the location of bicycle crossing in the viewpoint of bicycle safety. METHODS : Four types of bicycle crossing by curve radius and driver's check around the behavior are set to simulate the risk of collisions between bicycles and car turning right. Simulation using fortran programming are conducted on total 60 cases. RESULTS : Bicycle crossing located behind of crosswalk is lower the risk of collisions with car in all cases. In addition to the larger curve radius of pavement edge at intersection and the more pay attention to the rear by the turn head to the right is too low the risk of collisions with car. CONCLUSIONS : It is show that the location of bicycle crossing is safer behind than in front of crosswalk in the viewpoint of bicycle safety.

• 자동차안전학회지
• /
• 제14권3호
• /
• pp.35-40
• /
• 2022

In this study, the driving performances of elderly who's age is over 65 were evaluated. The driving simulation was conducted using a compact driving simulation (CDS) and the simulation scenarios were developed from actual roads by replicating geometry of skewed intersection and traffic control devices located in Jungnang-gu, Seoul, Korea. 27 elderly drivers and 10 non-elderly drivers were recruited and participated on the virtual turning right and going straight driving experiment of CDS. Virtual driving data of driving time, speed, distance, acceleration and deceleration speeds, brake power, and steering wheel rotation angle were recorded and analyzed. Generally, elderly driver took more times to pass through the skewed intersection road and showed lower approaching speed as much as 40% and 25% in case of turning right and going straight scenarios respectively. The speed deviation at skewed intersection road between elderly and non-elderly driver is expected to cause frequent lane changes and overtaking.

• 자동차안전학회지
• /
• 제15권1호
• /
• pp.35-44
• /
• 2023

The purpose of this study is to predict how the actual accident changes by reconstructing the accident with an Autonomous Emergency Braking system (AEB) based on the actual accident of the LTAP-OD (Left Turn Crossing Path - Opponent Direction) intersection. A virtual AEB sensor was developed, and 150 head-on collision accident reports were secured to the insurance company to reconstruct the accident. As a result of the accident type analysis, a total of 13 types of head-on collision accidents were derived, and it is the LTAP-OD intersection accident with the highest frequency. In the LTAP-OD intersection accident, the simulation was conducted by applying the virtual AEB of each vehicle, the accident rate decreased by 90% or more when the AEB of the left-turn vehicle was applied, and the accident rate decreased by 50%. In addition, the most frequent collision types in LTAP-OD accidents were the front bumper on the driver's side of a vehicle going straight and the front bumper on the passenger's side of a vehicle turning left.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제9권2호
• /
• pp.113-118
• /
• 2002

Definition and some properties of the degree-n bifurcation set are introduced. It is proved that the interval formed by the intersection of the degree-n bifurcation set with the real line is explicitly written as a function of n. The functionality of the interval is computationally and geometrically confirmed through numerical examples. Our study extends the result of Carleson & Gamelin ［2］.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.485-489
• /
• 1995

From the relationship between the two different views of an object with grid, the three dimensional coordinates of intersection points are determined. The images are captured and digitized with a CCD camera and a frame grabber. To find intersection points, local thresholding and line thinning operations are performed. By establishing the correspondence between the points in the two views, the three dimensional corrdinates of intersection points are calculated.