• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.71-73
• /
• 2004

Recently many peoples served multimedia data from Internet. But characteristic of multimedia-object about that effect on weight and transport-time causes Streaming Application is restricted to high-quality-service. This research propose the Quality-of-service(QoS) supporting for Home Gateway that behaving Routing and media platform equipment, using CBQ Scheduling scheme. The QoS Supporting for Multimeda Service that using general Rouging policy is difficult because media platform locate in Home Gateway. Therefore this research propose Routing mechanism to QoS support of media platform located in Gateway using TCP based CBQ Control.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.6
• /
• pp.617-623
• /
• 2016

Recently, IoT technology has been applied to the control of appliances in the home, and information about temperature, humidity, etc. is collected and the application of the system to control the indoor environment automatically is increasing. Currently, the network configuration of IoT devices is mainly used to connect IoT devices to the Internet through wireless gateways. Since such a method is dependent on a gateway, there are limitations in providing various services. Therefore, this paper proposes an independent method of gateway by using IoT network without using gateway by applying long distance wireless communication technology. IoT devices using the proposed long distance wireless internet technology can connect to a remote server and provide mobility that can not be supported by existing methods, thereby providing more various services. The performance evaluation of the proposed network configuration method is compared with the delay time and the amount of data generated in the existing network method constituted by the gateway and the proposed network configuration method respectively. Experimental results show that the proposed method decreases the delay time and the amount of data generated by the gateway.

• Journal of Internet Computing and Services
• /
• v.7 no.3
• /
• pp.61-69
• /
• 2006

Data synchronization between data stored in mobile communication terminals and a central server is one of essential tasks for efficient mobile communication environments. Since, however, manufacturers of mobile terminals have their proprietary data synchronization mechanisms, data interoperability can hardly be achieved. Therefore, SyncML data synchronization mechanism in mobile communication environments was proposed as an open standard by OMA(Open Mobile Alliance). In this paper, a SyncML-based data synchronization gateway is designed and implemented which can process ActiveSync data also. In other words, by constructing a combined data synchronization gateway which can transform ActiveSync data into SyncML data, data interoperability between mobile terminals which use two different data synchronization mechanisms can be achieved, In addition, mobile communication experiments between ActiveSync-based terminals and a SyncML-based central server show that the data synchronization gateway constructed in this paper, works correctly.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.1
• /
• pp.63-69
• /
• 2016

Although the previous information technologies had been used for the quick and accurate processing of work, At present, however, as the combination with the Internet, the IOT(Internet-of-Things) era in which the diverse pieces of information are collected and handled through the sensor networks is in progress. Among these application fields of the IoT, the indoors position identification technology has been developing in the direction of providing the position information in the buildings of which the lengths and the interiors are complicated and in the direction of providing the various pieces of information and others of the like to the nearby customers. In this paper, we proposed an indoors position identification system that detects the patrol positions of the prison officers in the correctional facilities and in the prisons by using the ultrasonic waves, that transmits these to the control system and the data gateway, and that transmits the detected data. The Indoors Positioning identification System is organized with the tags for recognizing the positions that transmit the ultrasonic signal, ultrasonic receiver and data gateway. And the indoors position information data were transmitted to the management system through the data gateway. We evaluated the transmission error, by changing the distance of the proposed system for location recognition tag and the receiver, As a result, we found out that, when the transmission distance was 10 cm or less, the errors occurred in the form of the distortions. And when it was 110 cm or more, the transmission errors occurred due to the propagation diminutions of the ultrasonic wave signals. And when the transmission distance was from 10 cm to 100 cm, it was shown that the proposed system was possible without any errors.

• Journal of Internet Computing and Services
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2024

In the API gateway, API composition is an essential function that can reduce the number of client calls and prevent over-fetching and under-fetching. API composition that operate with IMJ (In-Memory Join) consume a lot of resources, putting a burden on the performance of the API gateway. In this paper, to improve the problem of IMJ-style API composition, we propose SAPIC (Stream-based API Composition), which delivers the data to be composed to the client by streaming. SAPIC calls each MSA API that makes up the client response data and immediately streams the received response data to the client, reducing the resource consumption of the API gateway and providing faster response time compared to IMJ. As a result of a comparison experiment with GraphQL, a representative API combination technology, SAPIC recorded a maximum CPU occupancy rate of approximately 21 to 70 % lower, a maximum heap usage rate of approximately 16 to 74 % lower, and a throughput rate that was 1 to 2.3 times higher than GraphQL.

• Journal of Internet Computing and Services
• /
• v.25 no.4
• /
• pp.39-46
• /
• 2024

An API gateway is a high-availability component that provides a single entry point for API clients outside the cloud to connect with services inside the cloud. It has a high risk of creating bottlenecks and requires redeployment when services change. The Java language, in which several API gateways are implemented, announced technologies called GraalVM Native Image and Virtual Thread to overcome problems with deployment and operational performance. Applying these technologies to Java applications requires changes to the source code and deployment procedures. In this study, the performance of the API gateway was measured and analyzed when it operated based on GraalVM Native Image and Java Virtual Machine(JVM) and between Virtual Thread and Reactive thread processing methods. In this study, evaluation indicators were selected to evaluate deployment performance and operational performance, and the performance of the evaluation indicators was measured and evaluated in four environments.

• Journal of Digital Convergence
• /
• v.11 no.5
• /
• pp.299-305
• /
• 2013

Internet Data is hugely increased for high quality multimedia services and the related techniques is also developed rapidly. This paper is aimed to develop integrated internet data and Digital-Television receiving system with high performance and optimization, which is obtained by one-board integration with load control. It is applicable to various devices like computer, set-top box, home multimedia gateway etc. The performance is proved by evaluation test. It shows that the developed device can be TV tuner and internet AP for more robust multimedia services.

• Journal of KIISE:Information Networking
• /
• v.34 no.1
• /
• pp.33-40
• /
• 2007

A multihomed enterprise or AS(Autonomous System) improves reliability and performance by acquiring its Internet connectivity from more than two ISP(Internet Service Provider). Multihoming protocol must allow a multihomed site whose connectivity through one of the ISPs fails to keep its Internet connectivity As one of mechanisms to do this, tunneling mechanism through Non-direct EBGP(Exterior Border Gateway Protocol) is defined. This mechanism makes connectivity to the Internet more reliable, but causes the problem that makes the communication route non-optimal. In this paper, we propose the route optimization mechanism using an extension header in the IPv6 multihoming environment.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.365-368
• /
• 1998

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1213-1222
• /
• 2021

This study is a digitalization study based on ICT technology as part of the development of innovative technologies in the new energy industry as a 2050 carbon-neutral policy. It is the development of an oneM2M-based IoT server platform that can be integrated and managed in conjunction with the external interface of each energy facility. It analyzes KEPCO's e-IoT standard specifications through the Power Research Institute's 'SPIN' and develops representative standards, LWM2M and oneM gateway platforms. OneM2M secures and analyzes the recently announced standard for Release 2 instead of the existing Release 1. In addition, the e-IoT standard oneM2M platform is developed based on R2. In addition, it selects the specifications for e-IoT gateway devices that can sufficiently implement KEPCO's e-IoT standards. In addition, a technology and system for developing a high-performance gateway device that considers future scalability were proposed.