• Journal of dental hygiene science
• /
• v.20 no.1
• /
• pp.9-15
• /
• 2020

Background: Although the consumption of vitamin beverages has increased because of the recent interest in health and beauty, guidelines addressing appropriate consumption habits are lacking. Thus, the aim of this study was to investigate the erosive potential of several vitamin beverages and to propose guidelines for the appropriate intake of these drinks. Methods: Five vitamin beverages were selected after a pre-investigation of the current beverage market. Coca-Cola and mineral water were selected as the control beverages. The pH of the beverages was measured with a calibrated pH meter, and the titratable acidity (TA) was determined by using 1 M sodium hydroxide to reach pH 5.5 (TA5.5) and 7.0 (TA7.0). The screening method suggested by the International Organization for Standardization was used to measure pH variation (ΔpH) by using an under-saturated hydroxyapatite solution to determine the difference between the initial and final pH of the screening solution. All measurements were performed in triplicate. Results: All vitamin beverages tested in this study exhibited a low pH (2.53~2.99), similar to Coca-Cola, which is known to be a highly acidic beverage. The highest TA5.5 and TA7.0 values of the vitamin beverages were 7.03 ml and 8.81 ml, respectively. The largest change in pH determined by using the screening solution was found in Bacchus D (ΔpH 1.44±0.05). The mean ΔpH of the vitamin beverages was 1.12±0.29, which was higher than that of Coca-Cola (positive control, ΔpH 0.58±0.05). Conclusion: Vitamin beverages exhibited an erosive potential capable of damaging enamel surfaces. Therefore, the frequency of vitamin beverage intake should be limited, and individuals consuming these drinks should try to restore normal oral pH as quickly as possible.

• Journal of the Korean Chemical Society
• /
• v.57 no.1
• /
• pp.40-51
• /
• 2013

In order to develop a quantitation method for Perfluorooctanesulfonic acid(PFOS) contained in plastics that are mainly used in electric and electronic equipment, this study consisted of conducting method validations with LDPE samples using soxhlet solvent extraction and LC/MS. As a result, the limits of detection and quantitation (LOD, LOQ) were $2.58{\mu}g/L$ and $7.82{\mu}g/L$, respectively. Additionally, the recovery was 96-102%. For the correlation coefficient of LC/MS, the $r^2$ value was 0.9992 in the concentration range of $7.82-100{\mu}g/L$, which confirmed its linearity. Furthermore, for the standardization of the analysis method for PFOS in electric and electronic equipment to correspond to EU environmental regulations, we conducted a proficiency test with a number of domestic and international testing laboratories. Three of the ten testing laboratories that participated in the proficiency test submitted outliers. Accordingly, we examined the cause of the outliers using the $^{19}F$ NMR, finding that the main cause was an error in the processing of the results for isomers in PFOS that existed in standard solutions and samples.

• Journal of radiological science and technology
• /
• v.28 no.3
• /
• pp.241-248
• /
• 2005

X-ray examinations represent the largest man-made source of radiation exposure for the population. The need for standardization of radiation exposures has been suggested and the guidance levels for various radiographic and radioisotope examinations has been proposed by the International Atomic Energy Aency(IAEA) as a safety standard. In many countries, the situation of medical radiographic exposures in each country should be researched before the appropriate guidance level is established. In this study, measurements of entrance surface dose, dose-area product(DAP), computed tomograghic dose index(CTDI) and mean glandular dose(MGD) were carried out in patients who underwent routine x-ray examinations, fluoroscopy, computed tomograghy and mamography in Korea. These measured quantities were compared with the results from the calculation method in previous study. And we suggested diagnostic reference levels in medical imaging in Korea.

• Nuclear Engineering and Technology
• /
• v.39 no.1
• /
• pp.31-42
• /
• 2007

Energy supply is increasingly showing up as a major issue for electricity supply, transportation, settlement, and process heat industrial supply including hydrogen production. Nuclear power is part of the solution. For electricity supply, as exemplified in Finland and France, the EPR brings an immediate answer; HTR could bring another solution in some specific cases. For other supply, mostly heat, the HTR brings a solution inaccessible to conventional nuclear power plants for very high or even high temperature. As fossil fuels costs increase and efforts to avoid generation of Greenhouse gases are implemented, a market for nuclear generated process heat will be developed. Following active developments in the 80's, HTR have been put on the back burner up to 5 years ago. Light water reactors are widely dominating the nuclear production field today. However, interest in the HTR technology was renewed in the past few years. Several commercial projects are actively promoted, most of them aiming at electricity production. ANTARES is today AREVA's response to the cogeneration market. It distinguishes itself from other concepts with its indirect cycle design powering a combined cycle power plant. Several reasons support this design choice, one of the most important of which is the design flexibility to adapt readily to combined heat and power applications. From the start, AREVA made the choice of such flexibility with the belief that the HTR market is not so much in competition with LWR in the sole electricity market but in the specific added value market of cogeneration and process heat. In view of the volatility of the costs of fossil fuels, AREVA's choice brings to the large industrial heat applications the fuel cost predictability of nuclear fuel with the efficiency of a high temperature heat source tree of Greenhouse gases emissions. The ANTARES module produces 600 MWth which can be split into the required process heat, the remaining power drives an adapted prorated electric plant. Depending on the process heat temperature and power needs, up to 80% of the nuclear heat is converted into useful power. An important feature of the design is the standardization of the heat source, as independent as possible of the process heat application. This should expedite licensing. The essential conditions for success include: ${\bullet}$ Timely adapted licensing process and regulations, codes and standards for such application and design ${\bullet}$ An industry oriented R&D program to meet the technological challenges making the best use of the international collaboration. Gen IV could be the vector ${\bullet}$ Identification of an end user(or a consortium of) willing to fund a FOAK

• International Journal of Contents
• /
• v.12 no.2
• /
• pp.12-23
• /
• 2016

This paper presents a novel concept of Disaster Prevention Design (DPD) and its derived subjects and topics for the safety of folk villages in both Korea and Japan. Nowadays, design concepts are focused on 'human-oriented nature' as a whole and this tendency fits to be appropriate for disaster prevention against real dangers of a future society, which is expected to have far more complicated features. On the other hand, convergences have performed with other areas in the field of Information Communication Technology (ICT) so that we can easily find examples like 'the strategy of ICT-based convergence' of the Korean Government in 2014. Modern content designs including UI (user interface) and USN (ubiquitous sensor network) have been developed as one of the representative areas of ICT & UD (universal design) convergences. These days this novel concept of convergence is overcoming the existing limitations of the conventional design concept focused on product and/or service. First of all, from that point our deduced topic or subject would naturally be a monitoring system design of constructional structures in folk villages for safety. We offer an integrated model of maintenance and a management-monitoring scheme. Another important point of view in the research is a safety sign or sign system installed in folk villages or traditional towns and their standardization. We would draw up and submit a plan that aims to upgrade signs and sign systems applied to folk villages in Korea and Japan. According to our investigations, floods in Korea and earthquakes in Japan are the most harmful disasters of folk villages. Therefore, focusing on floods in the area of traditional towns in Korea would be natural. We present a water-level expectation model using deep learning simulation. We also apply this method to the area of 'Andong Hahoe' village which has been registered with the World Cultural Heritage of UNESCO. Folk village sites include 'Asan Oeam', 'Andong Hahoe' and 'Chonju Hanok' villages in Korea and 'Beppu Onsen' village in Japan. Traditional Streets and Markets and Safe Schools and Parks are also chosen as nearby test-beds for DPD based on ICT. Our final goal of the research is to propose and realize an integrated disaster prevention and/or safety system based on big data for both Korea and Japan.

• Korean Journal of Remote Sensing
• /
• v.26 no.5
• /
• pp.549-559
• /
• 2010

In geo-spatial information system building and operation, metadata is one of the crucial factors. Therefore, international and domestic organizations or associations for standardization have developed and distributed geo-based standard metadata to meet public demands. However, because metadata is composed of complicated elements and needs XML storage and management, individual organization which implement and operate practical application system is inclined to define and use its own metadata specifications. In this study, metadata extraction program, that metadata elements are directly extracted from geo-based file formats was developed to easily utilize standard metadata such as ISO/TC 19115, TTAS.KO-10.0139 and TTAS.IS-19115, and those elements are processed into XML. Furthermore, geo-based images sets are applied to another metadata of ISO/TC 19115-2. As well, metadata transformation is needed due to inconsistent or non-corresponding definition among standard metadata; in this program, transformation modules are also implemented to interoperable uses between standard metadata specifications. Widely used data formats are dealt with in this program, but extension for other formats and other metadata specifications is possible, and it is expected that availability of standard metadata is increased, through this kind of development.

• Journal of Broadcast Engineering
• /
• v.24 no.5
• /
• pp.849-858
• /
• 2019

Recent developments in computer graphics technology and image processing technology have increased interest in point cloud technology for inputting real space and object information as three-dimensional data. In particular, point cloud technology can accurately provide spatial information, and has attracted a great deal of interest in the field of autonomous vehicles and AR (Augmented Reality)/VR (Virtual Reality). However, in order to provide users with 3D point cloud contents that require more data than conventional 2D images, various technology developments are required. In order to solve these problems, an international standardization organization, MPEG(Moving Picture Experts Group), is in the process of discussing efficient compression and transmission schemes. In this paper, we provide a region division transfer method of 3D point cloud content through extension of existing MPEG-DASH (Dynamic Adaptive Streaming over HTTP)-SRD (Spatial Relationship Description) technology, quality parameters are further defined in the signaling message so that the quality parameters can be selectively determined according to the user's request. We also design a verification platform for ROUTE (Real Time Object Delivery Over Unidirectional Transport)/DASH based heterogeneous network environment and use the results to validate the proposed technology.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.3
• /
• pp.344-351
• /
• 2021

The purpose of this study was to compare surface hardness between titanium-nitride coated crowns (TiNCs) and stainless steel crowns (SSCs), and to evaluate the corrosion resistance and color sustainability of TiNCs. Ten TiNCs and 10 SSCs were used for the hardness test. Measurement was performed 30 times for each type of crowns, and the mean values were compared. Metallic raw material plates (before being processed into crowns) of TiNCs and SSCs were prepared for the corrosion resistance test. The total amounts of metal ion releases in the test solution were detected by inductively coupled plasma-optical emission spectrometry. Five TiNCs were subjected to the color sustainability test by applying repetitive brushing forces. The mean hardness values of TiNC group and SSC group were 395.53 ± 105.90 Hv and 278.70 ± 31.45 Hv respectively. Hardness of TiNCs were significantly higher than that of SSCs. The total amounts of metal ion releases from the materials of TiNCs and SSCs satisfied the criterion in International Organization for Standardization 22674. The results mean that TiNCs and SSCs were not harmful in an acidic environment. The golden coating was stable against the repetitive physical stimulations for a given period time.

• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.76-89
• /
• 2018

The distribution of the combined heat and power system is active as a solution to the instability of energy supply and environmental pollution caused by continuous industrial development. In Korea, the safety standards for combined heat and power system using a gas engine are insufficient therefore the study on this is needed. In this study, the safety performance and structural/material assessment items of domestic and international standards applied to the combined heat and power system were analyzed to carry out a standardization study on safety performance applicable to 20 kW gas engine combined heat and power system. In addition, the safety performance assessment (plan) of the gas engine combined heat and power system was derived by performing risk analysis and risk assessment using HAZOP. Assessment items include engine ignition systems related to safety performance, piping tight performance, watering and temperature rise performance, combustion performance, electrical efficiency, thermal efficiency, overall efficiency and humidity performance. Gas and water pipes, gas control and shut-off valves, durability, heat resistance, and cold resistance of metal or non-metallic materials related to the structure and materials of the gas engine combined heat and power systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.1
• /
• pp.19-26
• /
• 2021

The purpose of this study is to provide an environment that can support the development of the virtual asset industry. The limiting factors and countermeasures currently possessed by the virtual asset industry were considered in terms of legal and institutional aspects, technical aspects, and market aspects.Small businesses classified as virtual asset operators have difficulty meeting the government's requirements.Accordingly, SMEs with insufficient funds and manpower are withdrawn from the market, creating an environment where only large-scale enterprises with capital power survive.It is difficult to develop desirable technologies and markets in the virtual asset technology industry. In addition, small and medium-sized companies may be expelled from the market, causing damage to current users. Therefore, in terms of legal and institutional aspects, there is a lack of an exact scope of virtual asset providers, and thus it is necessary to respond to the controversial elements of virtual asset providers. In terms of technology, it is necessary to cope with the slowdown of the P2P method, the difficulty in recovering errors, and the absence of operational experts. Therefore, technology standardization and stabilization are required, and efforts must be made to cultivate operational technical personnel who can support them.In terms of the market, it is necessary to prepare measures to protect users of virtual assets and to establish countermeasures for companies operating virtual assets against weak user protection, inadequate application of the AML method, and limitations of taxation. This study is expected to contribute to active utilization support or related policies in the virtual asset industry.