• Steel and Composite Structures
• /
• 제27권6호
• /
• pp.717-725
• /
• 2018

One of the most important design criteria in military tunnels and armoured doors is to resist the blast loads with minimum structural weight. This can be achieved by using steel sandwich panels. In this paper, the nonlinear behaviour of steel sandwich panels, with different core materials: (1) Hollow (no core material); (2) Rigid Polyurethane Foam (RPF); and (3) Vulcanized Rubber (VR) under free air blast loads, was investigated using detailed 3D nonlinear finite element models in Ansys Autodyn. The accuracy of the finite element model proposed was verified using available experimental test data of a similar steel sandwich panel tested. The results show the developed finite element model can be reliably used to simulate the nonlinear behaviour of the steel sandwich panels under free air blast loads. The verified finite element model was used to examine the different parameters of the steel sandwich panel with different core materials. The result shows that the sandwich panel with RPF core material is more efficient than the VR sandwich panel followed by the Hollow sandwich panels. The average maximum displacement of RPF sandwich panel under different ranges of TNT charge (1 kg to 10 kg at a standoff distance of 1 m) is 49% and 53% less than the VR and Hollow sandwich panels, respectively. Detailed empirical design equations were provided to quantify the maximum deformation of the steel sandwich panels with different core materials and core thickness under a different range of blast loads. The developed equations can be used as a guide for engineer to design steel sandwich panels with RPF and VR core material under a different range of free air blast loads.

• Journal of Acupuncture Research
• /
• 제22권2호
• /
• pp.19-32
• /
• 2005

Objectives : to evaluate the analgesic effect of bee venom acupuncture on Choksamni (ST36) in the collagen-induced arthritis rats and investigate the role played by serotonergic receptor subtypes (5-HT1a, 5-HT2a) in the antinociceptive effect of bee venom acupuncture in a thermal hyperalgesia test Methods : Experiments were performed on 5 week-aged 60 male Sprague-Dawley rats according to National Institute of Health guidelines and the ethical guidelines of the International Association for the Study of Pain (IASP). Arthritis was induced with arthrogenic collagen emulsion (Bovine type II collagen ${\mu}g$ with incomplete Freund's adjuvant $100\;{\mu}g$). The onset of arthritis was considered to be present when erythema and swelling were detected in at least one joint. The thermal hyperalgesia was evaluated weekly with tail flick test in the rats of severity grade 3 without any injury at tail and foot (including inflammation, ulceration, snap). In the fourth week after first immunization, the analgesic effect of bee venom acupuncture (Choksamni, ST36) was measured with consecutive tail flick latency after intraperitoneal injection of spiroxatrine (1mg/kg) and spiperone (1mg/kg). Results : Chronic inflammatory pain was induced as time elapsed after the immunization of arthrogenic collagen and the maximum value was reached from third to fifth week. Chronic inflammatory pain induced by CIA was inhibited by bee venom acupuncture on the left ST36. The analgesic effect of bee venom acupuncture was inhibited by intraperitoneal injection of 5-HT1a antagonist spiroxatrine and 5-HT2a antagonist spiperone. Conclusions : Therefore, a conclusion. that the analgesic effect of bee venom acupuncture in the chronic inflammatory pain is partially mediated by 5-HT1a and 5-HT2a receptors can be made.

• Molecules and Cells
• /
• 제42권10호
• /
• pp.711-720
• /
• 2019

Sink strength optimizes sucrose import, which is fundamental to support developing seed grains and increase crop yields, including those of rice (Oryza sativa). In this regard, little is known about the function of vacuolar invertase (VIN) in controlling sink strength and thereby seed size. Here, in rice we analyzed mutants of two VINs, OsVIN1 and OsVIN2, to examine their role during seed development. In a phenotypic analysis of the T-DNA insertion mutants, only the OsVIN2 mutant osvin2-1 exhibited reduced seed size and grain weight. Scanning electron microscopy analysis revealed that the small seed grains of osvin2-1 can be attributed to a reduction in spikelet size. A significant decrease in VIN activity and hexose level in the osvin2-1 spikelets interfered with spikelet growth. In addition, significant reduction in starch and increase in sucrose, which are characteristic features of reduced turnover and flux of sucrose due to impaired sink strength, were evident in the pre-storage stage of osvin2-1 developing grains. In situ hybridization analysis found that expression of OsVIN2 was predominant in the endocarp of developing grains. A genetically complemented line with a native genomic clone of OsVIN2 rescued reduced VIN activity and seed size. Two additional mutants, osvin2-2 and osvin2-3 generated by the CRISPR/Cas9 method, exhibited phenotypes similar to those of osvin2-1 in spikelet and seed size, VIN activity, and sugar metabolites. These results clearly demonstrate an important role of OsVIN2 as sink strength modulator that is critical for the maintenance of sucrose flux into developing seed grains.

• East Asian Economic Review
• /
• 제25권3호
• /
• pp.273-309
• /
• 2021

The development of regulatory systems varies between transition and non-transition economies. This suggests that they provide different incentives for entrepreneurial development and could have varied effects on the economy because they have different methods to deal with market failure. However, limited empirical evidence exists to prove the assumption of dichotomy. Using comprehensive data for institutional quality, labor market and financial market development, this research sought to analyze their effect on employment growth at micro level. The results show that the quality of institutions in transition economies are poorer relative to those in non-transition economies, but their financial and labor markets are more developed than the latter. Further analysis for the transition sample shows that the three variables are individually positively related with employment growth. For the non-transition sample, institutional quality and labor market flexibility bear a positive and significant effect on employment. Financial market development enters the model with a negative coefficient when regressed alone, but a joint test of significance finds that all the variables have a positive effect on employment growth. This result could imply that there is interdependence between institutional quality, labor flexibility and financial market development in firm-employment-growth relationship, or complementarity between regulations and the quality of institutions. Alternatively, this finding suggests that a stringently regulated credit market in non-transition economies have a selection effect-allocating credit only to entrepreneurs who already demonstrate strong growth potential. In sum, despite differences in the evolution of regulatory environment between the two samples, both of them complement employment growth at firm level. The overall implication of these findings is that less rigid regulations and coherent policies that are enforced with impartiality provide incentives for firms to expand.

• Journal of Microbiology and Biotechnology
• /
• 제29권4호
• /
• pp.633-644
• /
• 2019

An advanced anaerobic expanded granular sludge bed (AnaEG) and an internal circulation (IC) reactor, which were adopted to treat starch processing wastewater (SPW) and ethanol processing wastewater (EPW), were comprehensively analyzed to determine the key factors that affected the granules and microbial communities in the bioreactors. The granule size of $900{\mu}m$ in the AnaEG reactor was smaller than that in the IC reactor, and the internal and external morphological structures of the granular sludge were also significantly different between the two types of reactors. The biodiversity, which was higher in the AnaEG reactor, was mainly affected by reactor type. However, the specific microbial community structure was determined by the type of wastewater. Furthermore, the dominant methanogens of EPW were mainly Methanosaeta and Methanobacterium, but only Methanosaeta was a major constituent in SPW. Compared with the IC reactor, characteristics common to the AnaEG reactor were smaller granules, higher biodiversity and larger proportion of unknown species. The comparison of characteristics between these two reactors not only aids in understanding the novel AnaEG reactor type, but also elucidates the effects of reactor type and wastewater type on the microbial community and sludge structure. This information would be helpful in the application of the novel AnaEG reactor.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권4호
• /
• pp.103-111
• /
• 2021

In modern society, digital lifestyles are spreading to minimize contact with people and to receive contactless information. The spread trend has established an unmanned distribution system in which transactions through contactless technologies such as kiosks and chatbots are activated in face-to-face transactions with sellers and consumers. In order to streamline logistics supply worldwide, digital new deal based joint logistics hubs, unmanned courier storage platforms, and fresh logistics based last mile services have been developed into unmanned logistics systems, focusing on the intelligent logistics system automation process. Unmanned courier storage system installed in urban areas and home to daily logistics where volume is concentrated are provided with fresh logistics services through cold chain and receiving freights in contactless environments. Development is also underway to minimize safety accidents caused by courier services, such as managing various information based on the integrated control system. This paper defines the concept of integrated operation for the development of a platform for contactless unmanned courier storage device developed into next-generation logistics system. In addition, we intend to develop systems engineering-based output for deriving safety requirements and specifications by identifying risk sources that may occur in the operational scenario. Therefore, the goal is to establish a foundation for safety and reliability between interfaces of logistics systems to be installed in apartment and subway station environments that want to provide unmanned logistics services to various consumers.

• 복식문화연구
• /
• 제29권6호
• /
• pp.779-794
• /
• 2021

In this study, the sales status of female ball-jointed dolls and their parts were investi- gated and analyzed. Baseline data from 194 products and 54 brands on domestic and international Internet sites was gathered for the manufacture of ball-jointed dolls and the development of prototype costumes for them. The results are as follows. First, the sizes used for ball-jointed dolls are SD, USD, MSD, 13SD, and 70SD together with height. This study analyzed 39 sizes (15~70cm) by classifying them into numbered groups: 1 (15~22cm), 2 (23~33cm), 3 (35~51cm), 4 (53~62cm), and 5 (63~70cm). The price varied depending on the size; for example, 50cm dolls were approximately 45,000 won, while limited editions were sold at high prices, regardless of their size. They were classified into designs according to their body proportions and facial features as follows: 7- or 8-head-figure, 5-head figure, and 3-head figure, and were presented proportionally as images of women, adolescents, and infants. Second, the head was incised so that the top could be removed horizontally or the facial region vertically, allowing attachment of the eyeballs (which were either glass, resin, or acrylic) to the inside. More than 30 different colors were sold. Various wig styles were provided, including cut, short hair, and perm. These were made from human hair, heat-resistant fiber, and artificial hair. For the hands, there was a design expressing human hand gestures. For the feet, heels were in the form of wearing either high-heels or flat soles.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권3호
• /
• pp.193-204
• /
• 2022

The 2018 Seoul Zero Pay is a policy actively promoted by the government as an economic stimulus package for small business owners and the self-employed who are experiencing economic depression due to COVID-19. However, the controversy over the effectiveness of Zero Pay continues even after two years have passed since the implementation of the policy. Zero Pay is a joint QR code mobile payment service introduced by the government, Seoul city, financial companies, and private simple payment providers to reduce the burden of card merchant fees for small business owners and self-employed people who are experiencing economic difficulties due to the economic downturn., it was attempted in the direction of economic revitalization for the return of alleyways[1]. Therefore, this study intends to draw implications for improvement measures so that the ongoing zero-pay can be further activated and the economy can be settled normally. The analysis results of this study are as follows. First, it shows the effect of increasing the income of small business owners by inducing consumption in alleyways through the economic revitalization policy of Zero Pay. Second, the issuance and distribution of Zero Pay helps to revitalize the local economy and contribute to the establishment of a virtuous cycle system. Third, stable operation is being realized by the introduction of blockchain technology to the Zero Pay platform. In terms of academic significance, the direction of Zero Pay's policies and systems was able to identify changes in the use of Zero Pay through big data analysis. The implementation of the zero-pay policy is in its infancy, and there are limitations in factors for examining the consumer image perception of zero-pay as there are insufficient prior studies. Therefore, continuous follow-up research on Zero Pay should be conducted.

• International journal of advanced smart convergence
• /
• 제12권2호
• /
• pp.76-83
• /
• 2023

Squatting of agricultural work can cause musculoskeletal disorders due to excessive pressure and rotational force on the knee joint In order to improve the assistive chair used in squatting agricultural work so that it can be used in a narrow groove, it is intended to improve the musculoskeletal harm of squatting work by attaching a spring on the assistive chair. Therefore, in the presenty study, 3D drawing was done using ProEngineer (3D), and a mock-up was produced and tested. Using pro-Engineer, it was judged that it was rare for plastic to be broken by a spring, so the analysis was conducted with a focus on springs. It was found that the structure that can absorb the shock according to the rigidity of the tape spring and balance the body is that the power to withstand the load of the weight is distributed as a whole when five springs are used. Electromyography was measured using ME600 (Mega Electronics, Finland) Measuring equipment attached to the waist, thighs, calves, and shins. EMG values were measured and compared with the prototype in two ways, when the worker did not wear the product and when he wore an existing product on the market. As a result of the experiment when using the prototype, the maximum EMG value for each part is considered to be helpful in preventing musculoskeletal diseases as the amount of muscle used is reduced in the waist, thighs, calves, and shins.

• International journal of advanced smart convergence
• /
• 제11권4호
• /
• pp.193-205
• /
• 2022

Based on the results of this study, we presented the following policy recommendations to improve the efficiency of operation and management of public cremation facilities. First, we findings the cremation number of all public cremation facilities in Gyeonggi-do increased from 39,918 people before the opening of public cremation facilities in Hwaseong to 55,642 people after the opening, showing a high rate of increase of 15,724 people(39.4%). Therefore, in order to increase the cremation ratio, the policy of expanding the supply of public cremation facilities should be actively pursued. Second, in this study we compared to before the opening of public cremation facilities in Hwaseong City, the ratio of cremation number the jurisdiction area of all public cremation facilities in Gyeonggi-do using the E-Haneul Funeral Information System increased by 19.0% from 35.9% to 54.9% after the opening, whereas it was analyzed that the outside of the jurisdiction area decreased by 19.0% from 64.1% to 45.1%. Therefore, in order to improve the convenience of citizens using the jurisdiction area, priority should be given to the promotion of policies for the establishment of public cremation facilities by local governments that do not have public cremation facilities. Third, through we research it is analyzed that the cremation ratio of the jurisdiction area of the public cremation facilities in Hwaseong City, which was jointly installed by six local governments located in Gyeonggi-do, was 92.4%, indicating that the ratio proportion of cremation number in the area is very high. Therefore, in order to improve the efficiency of the operation of public cremation facilities, the promotion of policies for joint installation and operation of public cremation facilities should be encouraged.