• Animal Bioscience
• /
• v.37 no.7
• /
• pp.1289-1302
• /
• 2024

Objective: There is a strong relationship between the content of beneficial fatty acids in milk and milk fat metabolic activity in the mammary gland. To improve milk quality, it is therefore necessary to study fatty acid metabolism in bovine mammary gland tissue. In adipose tissue, peroxisome proliferator-activated receptor gamma (PPARG), the core transcription factor, regulates the fatty acid metabolism gene network and determines fatty acid deposition. However, its regulatory effects on mammary gland fatty acid metabolism during lactation have rarely been reported. Methods: Transcriptome sequencing was performed during the prelactation period and the peak lactation period to examine mRNA expression. The significant upregulation of PPARG drew our attention and led us to conduct further research. Results: According to bioinformatics prediction, dual-luciferase reporter system detection, real-time quantitative reverse transcription polymerase chain reaction and Western blotting, miR-130a and miR-130b could directly target PPARG and inhibit its expression. Furthermore, triglyceride and oil red O staining proved that miR-130a and miR-130b inhibited milk fat metabolism in bovine mammary epithelial cells (BMECs), while PPARG promoted this metabolism. In addition, we also found that the coexpression of miR-130a and miR-130b significantly enhanced their ability to regulate milk fat metabolism. Conclusion: In conclusion, our findings indicated that miR-130a and miR-130b could target and repress PPARG and that they also have a functional superposition effect. miR-130a and miR-130b seem to synergistically regulate lipid catabolism via the control of PPARG in BMECs. In the long-term, these findings might be helpful in developing practical means to improve high-quality milk.

• Journal of Oral Medicine and Pain
• /
• v.35 no.2
• /
• pp.123-133
• /
• 2010

The purpose of this study is to investigate Tension-type headache associated with pericranial tenderness and Headache attributed to temporomandibular joint disorder among Characteristic pain index, Disability points, Chronic pain grade, Depression index, Nonspecific physical symptoms (pain items included), Nonspecific physical symptoms (pain items excluded), Jaw disability score using RDC/TMD Axis II. Eighty five patients who visited the Kyung Hee University Dental Hospital were diagnosed as Tension-type headache associated with pericranial tenderness(n=48) and Headache attributed to temporomandibular joint disorder(n=37) by the International Classification of Headache Disorders, 2nd Edition, and were administered the Korean versions of the RDC/TMD Axis II- Characteristic pain index, Disability points, Chronic pain grade, Depression index, Nonspecific physical symptoms (pain items included), Nonspecific physical symptoms (pain items excluded), Jaw disability score. Then it was analyzed statistically by SPSS(ver. 10.0). T-test, The Wilcoxon-signed rank test and Mann-Whitney U test (p<0.05) were used. There were no significant differences in Characteristic pain index, Disability points, Chronic pain grade, Depression index, Nonspecific physical symptoms (pain items included), Nonspecific physical symptoms (pain items excluded), Jaw disability score between two groups. Tension type headache associated with pericranial tenderness and Headache attributed to temporomandibular joint disorder showed similar Axis II feature. Tension-type headache associated with pericranial tenderness may be related to Headache attributed to temporomandibular joint disorder.

• Journal of Arbitration Studies
• /
• v.24 no.2
• /
• pp.3-31
• /
• 2014

As all aspects of international activity have kept growing in good transaction, transnational investments, joint ventures, and the licensing of intellectual property, it is inevitable for disputes to increase across national frontiers. International disputes can be settled by arbitration and ADR. In the situation presented in the paper, any dispute shall be finalized by arbitration and conciliation in the Gaeseong Industrial Complex. Inter-Korean Commercial Arbitration in the Gaeseong Industrial Complex has become the principal method of resolving disputes in trade, commerce, and investment in accordance with the "Agreement on South-North Commercial Dispute Settlement Procedures," "Agreement on Organization and Operation of Inter-Korean Commercial Arbitration Committee," and the Annexed Agreement on "Organization and Operation of Inter-Korean Commercial Arbitration Committee" (2013). But the follow-up measures of the said agreements have not been fulfilled. Some prerequisite measures of the Inter-Korean commercial arbitration must be satisfied. In order to proceed with arbitration and conciliation in the Gaeseong Industrial Complex, we need to ask the following: Does the status of an arbitrational matter? Should an agreement to arbitrate contain a choice of law clause? Should one provide for one arbitrator or three? How should the arbitrators be selected? What is the relation between party-appointed arbitrators and the presiding arbitrator (neutral arbitrator)? Do arbitrators compromise more than the litigation? Can conciliation be combined with arbitration? To execute the enactment of arbitration regulations, the contents of the Arbitration Rules of the Korean Commercial Arbitration Board (South) and the Korea International Trade Arbitration Committee (North), together with the Korean Arbitration Act and External Arbitration Act of North Korea and the UNCITRAL Model Arbitration Law and UNCITRAL l Arbitration Rules are reflected in the Rules. There are many aspects of the Inter-Korean Commercial Arbitration. It is essential to understand key elements; namely, the arbitration agreement, appointment of arbitrator, arbitral proceeding and arbitral award, and enforcement and setting aside of arbitral award. This research deals with five chapters. Chapter 1 provides the introduction. Chapter 2 deals with trade volume between South and North Korea and the kinds of dispute in Gaeseong. Chapter 3 addresses contents and follow-up measures of the agreement on the "South-North Commercial Dispute Settlement Procedures," "Agreement on Organization and Operation of Inter-Korean Commercial Arbitration Committee," and the Annexed Agreement on "Organization and Operation of Inter-Korean Commercial Arbitration Committee" (2013). Chapter 4 features the problems and tasks of the pertinent agreements. Chapter 5 gives the conclusion. Enabling parties to find an amicable solution to the dispute in the Gaeseong Industrial Complex can lead to a useful and appropriate framework either through direct negotiation or by resorting to conciliation or mediation in accordance with pertinent agreements and follow-up measures contained in the agreements.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.3
• /
• pp.263-268
• /
• 2009

The Yellow Sea is extremely important to the economy and to the health and well-being of surrounding countries, Korea and China. Recently, the Yellow Sea is under constantly increasing threat of degradation due to the increase of environmental pollution and over-fishing. The governments of Korea and China have been aware of the importance of the Yellow Sea and reached an Environmental Agreement between Korea and China at the governmental level(November, 1993) According to this environmental agreement the Yellow Sea Environmental Cooperative Research between Korea and China has been undertaken since 1997. The joint cruise had been conducted once a year at 33 stations in the 4 lines of the Yellow Sea where the 9 stations of the D line was newly added in the 7th cruise in 2003. The samples were analyzed by scientists of both countries at the WSFRI, Korea and the OEMNC of the SEPA, China in turn, the annual report has been published every year during 1998-2008. The scientific efforts to fix the cruise time in October and to extend research frequency, as twice a year, should be considered, and this requires the governmental supports such as research funds and other related administrational assistance on both sides. Finally, scientists should also pay a concentrated attention to standardize the analytical methods including quality control and to improve this Yellow Sea research as one of the most representative international projects in the Yellow Sea where sharing additional informations available, if exist of dumping sites and material content, and of the freshwater quality will be of great help to broaden the output of this joint research project.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.4
• /
• pp.24-31
• /
• 1996

In this paper, we present a speech translation system for hotel reservation, KT_STS(Korea Telecom Speech Translation System). KT-STS is a speech-to-speech translation system which translates a spoken utterance in Korean into one in Japanese. The system has been designed around the task of hotel reservation(dialogues between a Korean customer and a hotel reservation de나 in Japan). It consists of a Korean speech recognition system, a Korean-to-Japanese machine translation system and a korean speech synthesis system. The Korean speech recognition system is an HMM(Hidden Markov model)-based speaker-independent, continuous speech recognizer which can recognize about 300 word vocabularies. Bigram language model is used as a forward language model and dependency grammar is used for a backward language model. For machine translation, we use dependency grammar and direct transfer method. And Korean speech synthesizer uses the demiphones as a synthesis unit and the method of periodic waveform analysis and reallocation. KT-STS runs in nearly real time on the SPARC20 workstation with one TMS320C30 DSP board. We have achieved the word recognition rate of 94. 68% and the sentence recognition rate of 82.42% after the speech recognition tests. On Korean-to-Japanese translation tests, we achieved translation success rate of 100%. We had an international joint experiment in which our system was connected with another system developed by KDD in Japan using the leased line.

• Journal of Korea Technology Innovation Society
• /
• v.10 no.2
• /
• pp.230-254
• /
• 2007

Scientometrics means the metrics of science, and it plays a role in the measurement of scientists' activities by using research results like papers. Objective numerical values or indicators obtained by scientometric analysis may make a significant contribution to correct evaluation by excluding political or relationship bias or revealing significant researchers or their research fields that have been assessed relatively lower for their performance. In the period when the scale of technology was relatively large, such as for the development of heavy chemistry, it was possible to make a not-bad selection by an assessment made only with the intuition of the assessor. However, it is nearly impossible for experts with a narrow knowledge in a field to judge the direction of change correctly as the current science technology changes rapidly and tremendously. Even in an assessment of research performance of researchers or research institutions, only some notable researchers are able to attract attention owing to the Metthew effect, and the majority who have accumulated research results in depth are not able to receive reasonable research funding. Therefore, it might be natural that there is a growing need for assessment using scientometrics. The purpose of this research is to suggest some applicable scientometric techniques for an assessment of research performance to science and technology researchers and policy planners. In order to accomplish this, we used a frequency analysis of papers and its citations to assess the research performance of researchers, institutions, and countries for OLED technology as a case study. Furthermore, we position detailed technologies for OLED technology as arriving, growing, maturing, and declining technology by utilizing several network analysis techniques, make groups with researchers and institutions of same research interest. And we review the current international joint research of Korea, China, and Japan, who are in a competitive relationship. Also, at the end of each analysis result, we describe what kind of assessment should be available to Korean policy planners and research managers for such scientometric analysis results.

• Nuclear Engineering and Technology
• /
• v.42 no.6
• /
• pp.662-669
• /
• 2010

To develop the manufacturing methods for the blanket first wall (FW) of the International Thermonuclear Experimental Reactor (ITER) and to verify the integrity of the joint, Be/Cu mockups were fabricated and tested at the KoHLT-1 (Korea Heat Load Test facility), a graphite heater facility located at the Korea Atomic Energy Research Institute (KAERI). Since Be and Cu joining is the focus of the present study, the fabricated mockups had a CuCrZr heat sink joined with three Be tiles as an armor material, unlike the original ITER blanket FW, which has a stainless steel structure and coolant tubes. Hot isostatic pressing (HIP) was carried out at $580^{\circ}C$ and 100 MPa for 2 hours as the method for Be/Cu joining. Three interlayers, namely, $1{\mu}mCr/10{\mu}mCu$, $1{\mu}mTi/0.5{\mu}mCr/10{\mu}mCu$, and $5{\mu}mTi/10{\mu}mCu$ were applied as a coating to the Be tiles by a physical vapor deposition (PVD) method. A shear test was performed with the specimens, which were fabricated by the same methods as those used to fabricate the mockups. The average values were 125 MPa to 180 MPa, and the samples with the $1{\mu}mCr/10{\mu}mCu$ interlayer showed the lowest value. No defect or delamination was found in the joints of the mockups by the developed ultrasonic test using a flat-type probe with a 10 MHz frequency and a 0.25 inch diameter. High heat flux (HHF) tests were performed at $1.0\;MW/m^2$ heat flux for each mockup using the given conditions, and the results were analyzed by ANSYS-CFX code. For the test criteria, an expected fatigue lifetime about 1,000 cycles was obtained by analysis with ANSYS-mechanical code. Mockups using the interlayers of $1{\mu}mTi/0.5{\mu}mCr/10{\mu}mCu$ and $5{\mu}mTi/10{\mu}mCu$ survived up to 1,100 cycles over the required number of cycles. However, one of the Be tiles in the other two mockups using the $1{\mu}mCr/10{\mu}mCu$ interlayer was detached during the screening test, and others were detached by discharge after 862 cycles. The integrity of the joints using the proposed interlayers was proven by the HHF test, but the other interlayer requires more study before it can be used for the joining of Be to Cu. Moreover, it was confirmed that the measured temperatures agreed well with the analysis temperatures, which were used to estimate the lifetime and that the developed facility showed its capability of the long time operation.

• Journal of Distribution Science
• /
• v.8 no.4
• /
• pp.5-15
• /
• 2010

This study investigated research trends of JDS that KODISA published and gave implications to elevate quality of scholarly journals. In other words, the study classified scientific system of distribution area to investigate research trends and to compare it with other scholarly journals of distribution and to give implications for higher level of JDS. KODISA published JDS Vol.1 No.1 for the first time in 1999 followed by Vol.8 No.3 in September 2010 to show 109 theses in total. KODISA investigated subjects, research institutions, number of participants, methodology, frequency of theses in both the Korean language and English, frequency of participation of not only the Koreans but also foreigners and use of references, etc. And, the study investigated JDR of KODIA, JKDM(The Journal of Korean Distribution & Management) and JDA that researched distribution, so that it found out development ways. To investigate research trends of JDS that KODISA publishes, main category was made based on the national science and technology standard classification system of MEST (Ministry Of Education, Science And Technology), table of classification of research areas of NRF(National Research Foundation of Korea), research classification system of both KOREADIMA and KLRA(Korea Logistics Research Association) and distribution science and others that KODISA is looking for, and distribution economy area was divided into general distribution, distribution economy, distribution, distribution information and others, and distribution management was divided into distribution management, marketing, MD and purchasing, consumer behavior and others. The findings were as follow: Firstly, main category occupied 47 theses (43.1%) of distribution economy and 62 theses (56.9%) of distribution management among 109 theses in total. Active research area of distribution economy consisted of 14 theses (12.8%) of distribution information and 9 theses (8.3%) of distribution economy to research distribution as well as distribution information positively every year. The distribution management consisted of 25 theses (22.9%) of distribution management and 20 theses (18.3%) of marketing, These days, research on distribution management, marketing, distribution, distribution information and others is increasing. Secondly, researchers published theses as follow: 55 theses (50.5%) by professor by himself or herself, 12 theses (11.0%) of joint research by professors and businesses, Professors/students published 9 theses (8.3%) followed by 5 theses (4.6%) of researchers, 5 theses (4.6%) of businesses, 4 theses (3.7%) of professors, researchers and businesses and 2 theses (1.8%) of students. Professors published theses less, while businesses, research institutions and graduate school students did more continuously. The number of researchers occupied single researcher (43 theses, 39.5%), two researchers (42 theses, 38.5%) and three researchers or more (24 theses, 22.0%). Thirdly, professors published theses the most at most of areas. Researchers of main category of distribution economy consisted of professors (25 theses, 53.2%), professors and businesses (7 theses, 14.9%), professors and businesses (7 theses, 14.9%), professors and researchers (6 theses, 12.8%) and professors and students (3 theses, 6.3%). And, researchers of main category of distribution management consisted of professors (30 theses, 48.4%), professors and businesses (10 theses, 16.1%), and professors and researchers as well as professors and students (6 theses, 9.7%). Researchers of distribution management consisted of professors, professors and businesses, professors and researchers, researchers and businesses, etc to have various types. Professors mainly researched marketing, MD and purchasing, and consumer behavior, etc to demand active participation of businesses and researchers. Fourthly, research methodology was: Literature research occupied 45 theses (41.3%) the most followed by empirical research based on questionnaire survey (44 theses, 40.4%). General distribution, distribution economy, distribution and distribution management, etc mostly adopted literature research, while marketing did empirical research based on questionnaire survey the most. Fifthly, theses in the Korean language occupied 92.7% (101 theses), while those in English did 7.3% (8 theses). No more than one thesis in English was published until 2006, and 7 theses (11.9%) were published after 2007 to increase. The theses in English were published more to be affirmative. Foreigner researcher published one thesis (0.9%) and both Korean researchers and foreigner researchers jointly published two theses (1.8%) to have very much low participation of foreigner researchers. Sixthly, one thesis of JDS had 27.5 references in average that consisted of 11.1 local references and 16.4 foreign references. And, cited times was 0.4 thesis in average to be low. The distribution economy cited 24.2 references in average (9.4 local references and 14.8 foreign references and JDS had 0.6 cited reference. The distribution management had 30.0 references in average (12.1 local references and 17.9 foreign references) and had 0.3 reference of JDS itself. Seventhly, similar type of scholarly journal had theses in the Korean language and English: JDR( Journal of Distribution Research) of KODIA(Korea Distribution Association) published 92 theses in the Korean language (96.8%) and 3 theses in English (3.2%), that is to say, 95 theses in total. JKDM of KOREADIMA published 132 theses in total that consisted of 93 theses in the Korean language (70.5%) and 39 theses in English (29.5%). Since 2008, JKDM has published scholarly journal in English one time every year. JDS published 52 theses in the Korean language (88.1%) and 7 theses in English (11.9%), that is to say, 59 theses in total. Sixthly, similar type of scholarly journals and research methodology were: JDR's research methodology had 65 empirical researches based on questionnaire survey (68.4%), followed by 17 literature researches (17.9%) and 11 quantitative analyses (11.6%). JKDM made use of various kinds of research methodologies to have 60 questionnaire surveys (45.5%), followed by 40 literature researches (30.3%), 21 quantitative analyses (15.9%), 6 system analyses (4.5%) and 5 case studies (3.8%). And, JDS made use of 30 questionnaire surveys (50.8%), followed by 15 literature researches (25.4%), 7 case studies (11.9%) and 6 quantitative analyses (10.2%). Ninthly, similar types of scholarly journals and Korean researchers and foreigner researchers were: JDR published 93 theses (97.8%) by Korean researchers except for 1 thesis by foreigner researcher and 1 thesis by joint research of the Korean researchers and foreigner researchers. And, JKDM had no foreigner research and 13 theses (9.8%) by joint research of the Korean researchers and foreigner researchers to have more foreigner researchers as well as researchers in foreign countries than similar types of scholarly journals had. And, JDS published 56 theses (94.9%) of the Korean researchers, one thesis (1.7%) of foreigner researcher only, and 2 theses (3.4%) of joint research of both the Koreans and foreigners. Tenthly, similar type of scholarly journals and reference had citation: JDR had 42.5 literatures in average that consisted of 10.9 local literatures (25.7%) and 31.6 foreign literatures (74.3%), and cited times accounted for 1.1 thesis to decrease. JKDM cited 10.5 Korean literatures (36.3%) and 18.4 foreign literatures (63.7%), and number of self-cited literature was no more than 1.1. Number of cited times accounted for 2.9 literatures in 2008 and then decreased continuously since then. JDS cited 26,8 references in average that consisted of 10.9 local references (40.7%) and 15.9 foreign references (59.3%), and number of self-cited accounted for 0.2 reference until 2009, and it increased to be 2.1 references in 2010. The author gives implications based on JDS research trends and investigation on similar type of scholarly journals as follow: Firstly, JDS shall actively invite foreign contributors to prepare for SSCI. Secondly, ratio of theses in English shall increase greatly. Thirdly, various kinds of research methodology shall be accepted to elevate quality of scholarly journals. Fourthly, to increase cited times, Google and other web retrievals shall be reinforced to supply scholarly journals to foreign countries more. Local scholarly journals can be worldwide scholarly journal enough to be acknowledged even in foreign countries by improving the implications above.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.2
• /
• pp.230-240
• /
• 2016

Information on the effects of different yeast species on ruminal fermentation is limited. This experiment was conducted in a $3{\times}4$ factorial arrangement to explore and compare the effects of addition of three different live yeast species (Candida utilis 1314, Saccharomyces cerevisiae 1355, and Candida tropicalis 1254) at four doses (0, $0.25{\times}10^7$, $0.50{\times}10^7$, and $0.75{\times}10^7$ colony-forming unit [cfu]) on in vitro gas production kinetics, fiber degradation, methane production and ruminal fermentation characteristics of maize stover, and rice straw by mixed rumen microorganisms in dairy cows. The maximum gas production (Vf), dry matter disappearance (IVDMD), neutral detergent fiber disappearance (IVNDFD), and methane production in C. utilis group were less (p<0.01) than other two live yeast supplemented groups. The inclusion of S. cerevisiae reduced (p<0.01) the concentrations of ammonia nitrogen ($NH_3$-N), isobutyrate, and isovalerate compared to the other two yeast groups. C. tropicalis addition generally enhanced (p<0.05) IVDMD and IVNDFD. The $NH_3$-N concentration and $CH_4$ production were increased (p<0.05) by the addition of S. cerevisiae and C. tropicalis compared with the control. Supplementation of three yeast species decreased (p<0.05) or numerically decreased the ratio of acetate to propionate. The current results indicate that C. tropicalis is more preferred as yeast culture supplements, and its optimal dose should be $0.25{\times}10^7$ cfu/500 mg substrates in vitro.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.570-576
• /
• 2018

In reinforced concrete structures, the joints of ordinary rebars are usually lap joints, which are bound by binding wires with rebars, and mechanical joints by couplers. In domestic design standards (concrete design code), welded lap joints are restricted for ordinary rebars, but overseas standards allow welded lap joints of ordinary rebars through pre-heating. This study investigated the domestic and international standards/criteria and evaluated the fracture strength by performing the tensile test on the lap welded joint of SD400 grade rebars, which is used the most in the construction sites. The weld length of the specimen for weld lap joints is based on the minimum weld length (8d) given in the KS standard (KS B ISO 17660-1). According to AWS D1.4, the preheating temperature was set to $150^{\circ}C$ for D19 and below, and $260^{\circ}C$ for D22 and above. In the test results, the tensile strength of rebars with welded lap joints exceeded the required strength (125% of the yield strength) according to the concrete design code. To analyze the effect of preheating, the tensile strength of the welded rebars after preheating was not significantly different from that of the welded rebars without preheating. The carbon equivalent content (Ceq) of the rebars used in the test was 0.45% or less. Under AWS D1.4, no preheating is required if the carbon equivalent is less than 0.45%. All specimens with a welded lap length of 8d failed by a bar fracture. The effect of preheating was confirmed to be insignificant due to the low carbon equivalent of the rebar.