• 한국습지학회지
• /
• 제21권2호
• /
• pp.102-113
• /
• 2019

조석에 따른 마산만의 수질의 차이를 파악하기 위하여 2016년 초여름(6월)과 여름(7, 8월)의 대조기 1 조석주기 내의 만조와 간조시에 6개의 조사정점에서 slack-tide sampling을 실시하였다. 조사된 모든 수질성분들의 혼합 상태는 SAL과의 사이의 상관관계를 통하여 잘 설명되고 있다. 초여름과 여름철 공통적으로 하천수 유입 물질인 TURB, DSi, NNN은 주로 보존성 혼합을, 내부증감 물질인 SS, COD, AMN, $H_2S$는 주로 비보존성 혼합을 나타내었다. 보존성 혼합은 만조와 간조의 수질 사이에 좋은 선형 관계를 나타내었고, 비보존성 혼합은 양자가 각기 다른 변동 양상을 나타내었다. 요인분석을 통하여 만조와 간조의 농도차의 시공간적 변화에 주요한 잠재변수들을 확인할 수 있었다. 초여름의 경우는 갈수기로서 외부유입 물질(allochthonous inputs)이 적으므로 농도차 변화에 주도적으로 영향을 미치는 오염원이 없이 조석, 유역으로부터 자연유입, 내부증감 등의 영향이 복합적으로 작용하여 4개의 요인(VF1~4)에 고루 분포되어 나타났다. 반면에 여름철의 경우는 하천수의 영향을 받는 ST-1에서 큰 농도차를 나타내는 지표들은 VF1 요인에 집중적으로 포함되어 나타났고, 그 밖에 내부 증감을 나타내는 지표들로 극명히 구분되어 나타났다. 실제로 항상 안정된 상태의 하구는 존재하지 않는다. Flushing time의 변화 등에 의하여 혼합양상은 항상 변할 수 있고, 여기에 내부증감으로 end-members의 조건이 변함에 따라 농도차의 발생은 불가피하다. 그러므로 하구의 수질을 조사할 때 평균적인 수질 자료를 확보하기 위한 시료 채취 방법을 항상 강구할 필요가 있다.

• 펄프종이기술
• /
• 제39권1호
• /
• pp.1-7
• /
• 2007

Internal fibrillation of pulp fiber is an important factor affecting paper properties. Internal fibrillation of pulp fiber is usually introduced with several kinds of modifications of fiber by the mechanical treatment such as refining, high shear and/or high consistency mixing, etc. Unfortunately there are no standardized methods that can characterize the extent of internal fibrillation and its contribution on the paper properties. The purpose of this study is to try and find the potential methods that can characterize the internal fibrillation of pulp fiber quantitatively. Softwood bleached kraft pulp was treated with Hobart mixer to introduce the internal fibrillation without the significant fiber damage and external fibrillation. The extent of internal fibrillation was increased with the increase of mechanical treatment consistency. Several fiber properties were measured to find the potential means that could characterize and quantity the internal fibrillation. Laminated area could not be used as a means for quantifying the internal fibrillation because of the effect of swelling and the different internal fibrillation behavior at different mechanical treatment consistency. Micro and macro internal fibrillation models were proposed for describing the different behavior for the mechanical treatment at low and high consistencies of pulp. The Internal fibrillation showed good correlation with swelling of fiber wall. This trend was confirmed through the measurement of wall thickness and/or cross section area of fiber. Therefore the internal fibrillation possibly can be described as the indices indicating the change of wall thickness and/or cross section area.

• 대한토목학회논문집
• /
• 제13권1호
• /
• pp.105-114
• /
• 1993

밀도가 큰 유체의 유입으로 인한 소규모저수지의 바닥밀도류에 의한 순환이 수치해에 의하여 해석된다. 밀도류전면이 하류경계에 도달하기전에는 밀도류전면의 이동에 따라 침강점 하류에 형성된 반시계방향 와의 이동에 의하여 저수지내 순환과 혼합이 이루어지며, 밀도류전면이 하류경계에 도달한 후에는 하류경계에서 밀도류의 상승으로 인한 일종의 내부파가 형성되고 이 파의 상 하류 반복 전파됨에 따라 저수지내 혼합이 이루어지면서 밀도층의 두께는 증가한다. 하류경계에서 유출되는 유체의 희석은 유입밀도후르드수 Fre, 저수지길이, 시간의 함수이며 유출유체의 밀도가 일정값에 도달되는 시간은 저수지길이가 길수록, Fre가 작을수록 증가하는 것으로 나타났다.

• 한국농공학회논문집
• /
• 제65권1호
• /
• pp.61-72
• /
• 2023

The increase in the rearing intensity of pigs has caused deterioration in the pig house's internal environment such as temperature, humidity, ammonia gas, and so on. Traditionally, the widely used method to control the internal environment was through the manipulation of the ventilation system. However, the conventional ventilation system had a limitation to control the internal environment, prevent livestock disease, save energy, and reduce odor emission. To overcome this problem, the air-recirculated ventilation system was suggested. This system has a semi-closed loop ventilation type. For designing this system, it was essential to evaluate the ventilation rates considering the pressure loss of ducts. Therefore, in this study, pressure loss calculation and experiment were conducted for the quantitative ventilation design of a semi-closed loop system. The results of the experiment showed that the inlet through which external air flows should always be opened. In addition, it was also found that for the optimum design of the semi-closed loop ventilation system, it was appropriate to install a damper or a backflow prevention device rather than a ventilation fan.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1999년도 제13회 학술강연논문집
• /
• pp.27-27
• /
• 1999

To illustrate the global variation of the droplet mean diameters and the turbulent flow characteristics in counterflowing internal mixing pneumatic nozzle, the experimental measurements at five axial downstream locations(i.e., at Z=30, 50, 80, 120, and 170mm) were made using a PDPA(Phase Doppler Particle Analyzer) under the different air injection pressures ranging from 40 ㎪ to 120 ㎪. A nozzle with axi-symmetric tangential-drilled four holes at an angle of 15$^{\circ}$ has been designed and manufactured. The distributions of velocities, turbulence intensities, turbulence kinetic energy, turbulent correlation coefficients, spray angle, droplet mean diameters, volume flux, number density are quantitatively analyzed. It is possible to discern the effects of increasing air pressure. It indicates that the strong axial momentum in spite of more or less disparity between the velocity components means more reluctant to disperse radially, and that axial fluctuating velocities are substantially higher than those of radial and tangential ones, suggesting that the disintegration process is enhanced under higher air assist. The larger droplets are detected in the spray centerline at the near stations and smaller ones are generated due to further subsequent breakup at farther axial locations are attributed to the internal mixing type nozzle characteristics. Despite of the strong axial momentum, the poor atomization around the centre close to the nozzle exit is attributed to the lower rates of spherical particles which are not subject to instantaneous breakup. As it goes downstream, however, substantial increases in SMD(Sauter Mean Diameter) from the central part toward spray periphery are understandable because the droplet relative velocity is too low to bring about any subsequent disintegration.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.2147-2159
• /
• 1991

본 연구에서는 가장 다순한 내부혼합형 이류체분사노즐의 기류속도, 액체유량, 노즐직경 및 혼합길이, 기액접촉각을 변화시켜 평균입경(SMD), 분무각, 입도분포, 분 무분사량분포 등을 조사하여 노즐형상에 따른 분무특성의 변화를 자세히 밝혀, 분무특 성을 조절할 수 있는 이류체분사 노즐의 설계에 대한 기초적 자료를 제시하고자 한다.

• Carbon letters
• /
• 제15권2호
• /
• pp.117-124
• /
• 2014

Conductive polymer composites (CPCs) consist of a polymeric matrix and a conductive filler, for example, carbon black, carbon fibers, graphite or carbon nanotubes (CNTs). The critical amount of the electrically conductive filler necessary to build up a continuous conductive network, and accordingly, to make the material conductive; is referred to as the percolation threshold. From technical and economical viewpoints, it is desirable to decrease the conductive-filler percolation-threshold as much as possible. In this study, we investigated the effect of polymer/conductive-filler interactions, as well as the processing and morphological development of low-percolation-threshold (${\Phi}c$) conductive-polymer composites. The aim of the study was to produce conductive composites containing less multi-walled CNTs (MWCNTs) than required for pure polypropylene (PP) through two approaches: one using various mixing methods and the other using immiscible polymer blends. Variants of the conductive PP composite filled with MWCNT was prepared by dry mixing, melt mixing, mechanofusion, and compression molding. The percolation threshold (${\Phi}c$) of the MWCNT-PP composites was most successfully lowered using the mechanofusion process than with any other mixing method (2-5 wt%). The mechanofusion process was found to enhance formation of a percolation network structure, and to ensure a more uniform state of dispersion in the CPCs. The immiscible-polymer blends were prepared by melt mixing (internal mixer) poly(vinylidene fluoride) (PVDF, PP/PVDF, volume ratio 1:1) filled with MWCNT.

• 한국유체기계학회 논문집
• /
• 제10권5호
• /
• pp.9-19
• /
• 2007

Fluid temperature fluctuations in a mixing tee pipe were numerically analyzed by LES model in order to clarify internal turbulent flows and to develope an evaluation method for high-cycle thermal fatigue. Hot and cold water with an temperature difference $40^{\circ}C$ were supplied to the mixing tee. Fluid temperature fluctuations in a mixing tee pipe is analysed by using the computational fluid dynamics code, FLUENT, Temperature fluctuations of the fluid and pipe wall measured as the velocity ratio of the flow in the branch pipe to that in the main pipe was varied from 0.05 to 5.0. The power spectrum method was used to evaluate the heat transfer coefficient. The fluid temperature characteristics were dependent on the velocity ratio, rather than the absolute value of the flow velocity. Large fluid temperature fluctuations were occurred near the mixing tee, and the fluctuation temperature frequency was random. The ratios of the measured heat transfer coefficient to that evaluated by Dittus-Boelter's empirical equation were independent of the velocity ratio, The multiplier ratios were about from 4 to 6.

• 한국건설순환자원학회논문집
• /
• 제10권1호
• /
• pp.74-79
• /
• 2022

본 연구에서는 고강도 콘크리트 및 시멘트 복합체의 밀실한 내부 구조로 인한 급격한 내부 습도 저하 및 수화도 저하 등의 영향을 파악하고자 하였다. 내부 Si 수화도 변화 검증을 위해 폐유리발포비드를 경량골재로 사용하였으며, 중장기에 걸쳐 내부 미반응 수화물의 저감 및 수화물 형성 경향을 파악하였다. 폐유리발포비드는 5, 10, 20 % 혼입되었으며 프리웨팅하여 사용하였다. 폐유리발포비드의 혼입률이 증가함에 따라 강도는 감소하는 경향을 보였다. 이와 함께 XRD 분석, TGA 분석 및 Si NMR 분석을 통해 프리웨팅된 폐유리발포비드의 혼입량이 내부에 증가할 때, 페이스트에 수분이 공급되는 것으로 내부 Si의 수화 정도는 달라지는 것으로 판단된다.

• 한국염색가공학회지
• /
• 제9권1호
• /
• pp.23-32
• /
• 1997

Composite membranes having different mixing ratio of Wool(SCMK) and poly(ethylene terephthalate) (PET) were prepared by dissolving wool/PET in hexafluoro-2-propanol(HFIP), casting the obtained solution on a glass plate and evaporation the solvent in the presence and absence of an electric field. The internal structure of the prepared membrane was investigated using polarise microscope dyeing and dye permeation method. In the composite membrane prepared under electric field, both components were micro mixing, while in the membranes prepared under nonelectric field, the two components formed a random sea/island structure according to different mixing ratio. Such characteristic membrane structure was influenced the permeation behavior of C.I. Acid Red 118 through the membranes from an aqueous solution.