• 한국방재학회 논문집
• /
• 제7권2호통권25호
• /
• pp.35-44
• /
• 2007

일반적으로 유동성 뒤채움재는 모래, 플라이애쉬, 물과 소량의 시멘트를 혼합하여 이용한다. 플라이애쉬는 재활용재료로서 최근에 재활용 활용도가 매우 높아, 이를 대체할 대체제로서 해양준설토를 이용하였다. 해양준설토를 이용한 유동성 뒤채움재의 특성을 비교하기 일반바다모래를 이용한 혼합물을 이용하였다. 해양준설토를 이용한 유동성 뒤채움재의 흐름특성, 경화특성 및 일축압축강도 특성을 평가하였다. 유동성 뒤채움재의 초기 공용성평가를 위해 최적의 배합비에서 3일 양생한 시료의 강도 특성을 이용하였다. 시간에 따른 유동성 뒤채움재의 점착력과 내부마찰각을 평가하였다. 또한 차량하중에 의한 침하량을 평가하기 위하여 크리프시험을 수행하였다. 이동용 FWD를 이용하여 혼합재료의 탄성계수를 역산하였다. 이러한 실험결과로부터 해양준설토를 이용한 유동성 뒤채움재의 공학적 특성은 도로하부 지하매설물용 뒤채움재로서 충분한 것으로 판단되었다.

• 자원환경지질
• /
• 제43권2호
• /
• pp.185-196
• /
• 2010

열수변질에 의한 점토맥이 존재하는 사면 발생시 사면의 안전성에 영향을 미치는 것으로 알려져 있다. 파괴면의 형성 위치에 따라 접촉면 조건과 비접촉면 조건으로 분류하여 점토맥의 점착력, 내부마찰각, 방향성, 지하수위, 강우강도, 강우 지속시간 등의 인자에 따라 점토맥이 사면 안전율에 미치는 영향을 수치 모델링 연구를 통해 조사하였다. 지반 정수가 클수록 사면 안전율이 증가하였다. 사면 내 지히수위가 상승하면 사면 안전율이 감소하는 것을 확인하였다. 다양한 토양에 대한 강우 침투 모델링 결과 이질토는 강우강도에 따라 다양한 지하수위 발달 경향을 보인다. 반면에 사질토는 빠른 배수로 인해 지하수위의 상승이 거의 나타나지 않았다. 따라서 점토맥이 존재하는 사면에서 사질토는 이질토에 비해 사면 안전율에 미치는 영향이 적었다.

• 지질공학
• /
• 제18권3호
• /
• pp.277-285
• /
• 2008

쏘일네일링은 최근 들어 그 적용성이 확대되고 있으나 아직까지 공인된 설계방법이 없다. 또한 쏘일네일링은 설계변수가 많고 설계변수 상호간의 민감도에 대한 연구가 되지 않은 상황에서 명확한 근거 없이 사용되고 있다. 특히, 본 연구의 주요 과제인 네일의 설치각도에 대한 민감성은 다루어지지 않고 있다. 따라서 본 연구는 이론적 계산식을 바탕으로 파괴면에 대한 네일의 각도와 벽체의 높이, 단위중량, 점착력, 내부 마찰각, 네일에 작용하는 인장력 등을 고려하여 안전율을 분석하였다. 그 결과, 배면지반이 수평이고 수직벽체인 경우 네일의 설치 각도는 하향보다 상향이 모두 안전율이 증가하는 것을 확인할 수 있었다.

• 한국지반공학회논문집
• /
• 제20권3호
• /
• pp.13-22
• /
• 2004

줄말뚝이 설치된 지반에서 지반의 측방변형에 의한 지반아칭발생시 말뚝주변지반의 파괴는 지반아칭영역중 외부아 치의 정상부에서 정상파괴가 발생될 때부터 시작하여 말뚝전면의 패기부에서 캡파괴가 발생될 때까지 진행된다. 따라서, 측방변형지반속 줄말뚝에 작용하는 측방토압은 정상파괴와 캡파괴 모두의 경우를 검토할 필요가 있다. 정상파괴시의 측방토압 산정식은 원주공동확장이론을 적용하여 제안할 수 있다. 이 제안식을 검토한 결과 말뚝에 작용하는 측방토압은 주변지반의 내부마찰각, 점착력 및 수평토압과 말뚝직경 및 말뚝설치간격에 큰 영향을 받고 있음을 알 수 있다. 그리고, 캡파괴에 의한 측방토압과 정상파괴에 의한 측방토압의 이론식을 이용하여 줄말뚝에 작용하는 측방토압 범위를 정의할 수 있다. 또한, 본 논문에서는 캡파괴와 정상파괴시 측방토압의 이론치과 모형실험으로부터 구한 실험치를 비교 검토하였다. 모형실험에서 얻은 캡파괴와 정상파괴의 실험치는 제안된 각 이론의 이론치와 잘 일치하고 있으므로, 제안된 이론식의 합리성을 확인할 수 있다.

• Geomechanics and Engineering
• /
• 제14권4호
• /
• pp.307-314
• /
• 2018

Strength of loess that experienced cyclic freeze and thaw is of great significance for evaluating stability of slopes and foundations in loess regions. This paper takes the frequently encountered loess in the Northwestern China as the study object and carried out three kinds of laboratory tests including freeze-thaw test, direct shear test and SEM test to investigate the strength behaviors of loess after cyclic freeze and thaw, and the correlation with meso-level changes in soil structure. Results show that for loess specimens at four dry densities, the cohesion decreases with freeze-thaw cycles until a residual value is reached and thus an exponential equation is proposed. Besides, little change in the angle of internal friction was observed as freeze-thaw proceeds. This may depend on the varying of soil structure, based on which a clue can be found from the surface morphology and mesoscopic scanning of loess specimens. Clearly we observed significant changes in surface morphology of loess and it tends to aggravate at higher water contents or more cycles of freeze and thaw. Moreover, freeze-thaw cycling leads to obvious changes in the meso-structure of loess including lowering the particle aggregates and increasing both the proportion of fine particles and porosity area ratio. A damage variable dependent on the ratio of porosity area is introduced based on the continuum damage mechanics and its correlation with cohesion is discussed.

• 한국농공학회지
• /
• 제26권1호
• /
• pp.29-37
• /
• 1984

This study was made to find several significant relations among various physical and mechanical properties including cone penetration resistance. The alluvial clay samples were taken at the Daebul Reclaimed Tideland in Samhomyeon, Yeongamgun, Jeonranamdo. The results of the study are summarized as follows; 1.Most samples belong to medium or high plastic, inorganic, silty clay(clay contents;32-64%, silt contents; 36-68%, sand contents; 0-3%). The specific gravities range from 2.70 to 2.73, the unit weights from 1.45 to 1. 75g/cm$^3$, the natural moisture contents from 45 to 77%, the liquid limits from 32 to 56%. It is certain that the foundation is weak because the natural moisture contents are much higher than the liquid limits. 2.It is known from the shear tests that the unconfined compression strenghs vary from 0.09 to 0. 38kg/cm2, the cohesions from 0.05 to 0. 21kg/cm2, the internal friction angles from 0 to 3˚. 3.The consolidation tests show that the initial void ratios range from 1.25 to 2.28, the compression indeices from 0.43 to 0.84, the preconsolidation loads from 0.21 to 0.74kg/cm$^2$. 4.Cone penetration resistances are usually less than 5kg/cm$^2$ from ground surface to the depth of about 8m, and from S to l0kg/cm$^2$ in the layer below about 8m to hard layer. 5.The cohesion and cone penetration resistance are in proportion to the depth of soil layer. 6.The correlations between various physical and mechanical properties including cone penetration resistance for the alluvial clay samples are as follows; a) Wn=0.944C+ l2.733 (r=0.829) b) LL=0. 728Cy+6. 991 (r=0. 873) c) PI=0.659Cy-8.168 (r=0.860) d) rt=0. 0077(272-Wn) =2.092-0. 0077Wn (r=0. 859) e) 60=0. 035wn-0 447 (r=0. 893) f) C=0.380qw+0.031 (r=0.816) g) qu=0.0707qc+0.029 (r=0.810) h) C=0.018Z+0.055 (r=O.802) I) qc=0. 415Z+1, 438 (r=0. 943)

• 한국농공학회논문집
• /
• 제55권6호
• /
• pp.145-154
• /
• 2013

Recently, damage occurrence by wind erosion has been increasing in society. In times past, such problems only took place in desert area ; however, in recent years, the wind erosion problem is spreading out to agricultural land. Wind erosion in agricultural land can cause loss of loam soils, the disturbance of the photosynthesis of the crop fields and serious economic losses. To overcome the mentioned problems, installation of windbreak fence can be recommended which function as disturbing strong wind and wind erosion. However, there is still no proper guideline to install the windbreak fence and the installation used to rely on the intuition of the workers due to the lack of related studies. Therefore, this study measured the aerodynamic resistance of screens of the windbreak fence using the apparatus for testing screens. The apparatus for testing screens was designed to measure pressure loss around the screen. Measured pressure loss by wall friction compensated for pressure loss to calculate the aerodynamic resistance of screens. The result of pressure loss by regression analysis derived the aerodynamic coefficient of Darcy-Forchheimer equation and power law equation. The aerodynamic resistance was constant regardless of the overlapped shape when the screen was overlapped into several layers. Increasing the number of layers of the screen, internal resistance increased significantly more, and pressure loss caused by the screen also increased linearly when the wind speed was certain conditions, but permeability had no tendency. In the future, the results of this study will be applied to the computational fluid dynamics simulation. The simulation models will be also validated in advance by wind tunnel experiments. It will provide standard of a design for constructing windbreak fence.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.451-458
• /
• 2001

The purpose of this study was to evaluate shear parameters on cutting slope of weathered granite soils by using small dynamic cone penetration test on the very moment of its cutting. The results were : On the relations among N$\_$c/, Li, and CEC, the condition of Li＞6%, CEC＞14(meq/100g) corresponds to that of N$\_$c/ values of 2∼30, and 3＜CEC＜14(meq/100g) to N$\_$c/=30∼50. Comparing the smallest penetration depth from two small dynamic cone penetration tests done at 5m below from the top of the slope on April 15th, October 31t. there was a l0cm difference. So we could find out the degree of weathering on the slope. And dividing the difference by 190 days (the whole testing time), we could know it's being weathered 0.052mm each day. The more N. value increases, the more shear parameters(internal friction angle ; $\phi$, cohesion : c) increase at a standard pressure($\sigma$＞32㎪). So the condition of N$\_$c/=2∼50 corresponds to that of $\phi$=27∼50, c=12∼49㎪. From the above testing results, the N$\_$c/ values more correspond to $\phi$ values than c values. In conclusion, this study suggests that on small dynamic cone penetration test a penetration boundary line of 5 centimeters is decided at around Li=4%, CEC=3(meq/100g) which is classified as a strong weathering soil. It also shows that as Li increases CEC increases as well, while N$\_$c/ decreases.

• 한국유체기계학회 논문집
• /
• 제9권1호
• /
• pp.25-31
• /
• 2006

The present study investigates the effects of bleed flow on heat/mass transfer and pressure drop in a rotating channel with transverse rib turbulators. The hydraulic diameter $(D_h)$ of the square channel is 40.0mm. The bleed holes are located between the rib turbulators on leading surface and the hole diameter (d) is 4.5 mm. The square rib turbulators are installed on both leading and trailing surfaces. The rib-to-rib pitch is 10.0 times of the rib height(e) and the rib height-to-hydraulic diameter ratio $(e/D_h)$ is 0.055. The tests were conducted at various rotation numbers (0, 0.2, 0.4), while the Reynolds number and the rate of bleed flow to main flow (BR) were fixed at 10,000 and $10\%$, respectively. The results suggest that the heat/mass transfer characteristics in the internal cooling passage are influenced by rib turbulators, bleed flow and the Coriolis force induced by rotation. For the rotating ribbed passage with bleed flow, the heat/mass transfer on the leading surface is hardly affected by bleed flow, but that on the trailing surface decreases due to the diminution of main flow. The results also show that the friction factor decreases with the bleed flow.

• Journal of Oral Medicine and Pain
• /
• 제19권1호
• /
• pp.137-149
• /
• 1994

This study was performed to investigate the relationship between Forward Head Posture(FHP) and Craniomandlbular Disorders(CMDs). Many studies reported that there was some relationship between them, however, there is still controversy. So It Is necessary to observe and compare many more patients with CMDs wirh normal controls. For the study 85 patients with CMDs and 37 dental students were selected as experimentals and controls, respectively. And the experimentals were classified Into two groups, that is, TMJ internal derangement group and muscle disorders group according to clinical diagnosis. For measuring the FHP, CROM(Cervical-Range-of-Notion)was used. This goniometer is composed of three part. First, gravity goniometer for flexion and extension. Second, magnetic compass and yoke for rotational movement. And last, forward head arm and vertebra locator for forward head posture. Next T-Scan, electronic occlusal analyzer, was used for recording of occlusal contact state. Other items such as maximum opening, lateral excursion, Helkimo's anamnestic index, and muscle palpation point from Friction's craniomandibular index were checked clinically by one examiner. The result of this study were as follows : 1. In male, control group showed much more measurement in resting forward head posture than did experimental group. But there were not significant differences between groups in female subject. From this results, the author contended that CROM is new measuring system and differ from other goniometers in some aspect, so that results should be re-evaluated 2. Mean value of maximum mouth opening in nearly all groups were greater than 40mm. and mouth opening had a significant correlation with occlusal force and with anamnestic index both sex. 3. Mean value of palpation point had not any correlationship with forward head posture in both sex, but there was significant difference between upper and lower group by rounded shouldes. 4. In summary, there was no significant relationship between forward head posture and sign and symptom of Craniomandibular Disorders.