• Health Policy and Management
• /
• v.14 no.1
• /
• pp.65-88
• /
• 2004

In general, empowerment is defined as the motivational concept of autonomy and self-efficacy. Recently, the concept of empowerment is applied to improve organizational staff's job satisfaction and organizational commitment in many organizations. Empower-ment in service organizations, i.e., hospitals, has certainly generated more publicity than any other organizations. The objectives of this study are, first, to measure the degree of hospital employees' empowerment using Spreitzer(1995)'s empowerment theory, second, to analyze the causal relationship of organizational and job characteristics, a degree of empowerment, and organizational performance(job satisfaction and organizational commitment), and third, to offer the strategy for the improvement of job satisfaction and organizational commitment. Spreitzer insists that the empowerment is composed of 4 dimensions(meaning, competence, self-determination, and impact). And he argues that various work-related characteristics is a direct cause of empowerment and the indirect cause of job satisfaction and organizational commitment, mediated by the empowerment latent variable. In order to perform this study, data were collected by self-administered questionnaires from hospital employees working in administrative department of 3 university hospitals in Inchon and Kyunggi-Do region. The number of cases is 181(response rate; 86%). The Collected data were analyzed with SPSS Ver. 10.0 and AMOSV Ver. 4.0. First, to test validity of variables, the factor analysis was used. Second, to test reliability, Cronbach's alpha coefficients was calculated. Cronbach's alpha of empowerment variable is 0.8323 showing that there's no problem in regard to the internal consistency. Also the Cronbach's alpha of other variables are 0.8301 of the degree of perceived control, 0.6705 of job characteristics, O.8787 of compensation, 0.9254 of job satisfaction, and 0.8389 of organizational commitment, respectively. Among the questions of job characteristics, two survey questions are deleted due to lowering the reliability. Third, to test multicollinearity and correlation of variables, the correlation analysis was performed. There was no problem of multicollinearity. Finally structural equation modelling (SEM) analysis was conducted to find the causal relationship of organizational and job Characteristics, empowerment, job satisfaction and organizational commitment. The 16 variables are included for the SEM analysis. The major results of this study are as follows: First, in the case of model fitness, the condition of x$^2$ statistic(92.187) is not fully satisfied, but the indices of GFI(0.912), AGFI(0.863), NFI(0.917) and CFI(0.928) are partially satisfied, which needs to upper 0.90. Second, in the result of hypotheses testing, all hypotheses are accepted and have a positive effect in 95% or 99% confidence interval(P<0.05 or P<0.001) except the effect of compensation variable on empowerment(P=0.082). Third, in regard to the direct, indirect, and total effect of variables, the direct effect of perceived control, task characteristics, and compensation on job satisfaction are 0.728, 2.264, 0.328 and on organizational commitment are 0.094, 1.411, 0.418, respectively. Also the indirect effect of perceived control, task characteristics, and compensation on job satisfaction are 0.311, 0.196, 0.028 and on organizational commitment are 0.210, 0.132, 0.019, respectively. Thus, these findings imply that various work-related factors are direct effect of empowerment and indirect effect of result variables, job satisfaction and organizational commitment. Also These results showed that the workplace empowerment is significant mediating factor of employee's job satisfaction and organizational commitment.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.1
• /
• pp.19-62
• /
• 1985

This study was performed to investigate: (i) the bending processing properties of silk worm oak (Quercus acutissima Carr.) and Korean red pine (Pinus densiflora S. et Z.) by boiling and steaming treatments; (ii) the effects of interrelated factors - sapwood and heartwood, annual ring placement, softening temperature and time, moisture content. and wood defects on bending processing properties; (iii) the changing rates of bending radii after release from a tension strap, and (iv) the improving methods of bending process by treatment with chemicals. The size of specimens tested was $15{\times}15{\times}350mm$ for boiling and steaming treatments and $5{\times}10{\times}200mm$ for treatments with chemicals. The specimens were green for boiling treatments and dried to 15 percent for steaming treatments. The specimens for treatments with chemicals were soaked in saturated urea solution, 35 percent formaldehyde solution, 25 percent polyethylene glycol -400 solution, and 25 percent ammonium hydroxide solution for 5 days and immediately followed the bending process, respectively. The results obtained were as follows: 1. The internal temperature of silk worm oak and Korean red pine by boiling and steaming time was raised slowly to $30^{\circ}C$ but rapidly from $30^{\circ}C$ to $80-90^{\circ}C$ and then slowly from $80-90^{\circ}C$ to $100^{\circ}C$. 2. The softening time required to the final temperature was directly proportional to the thickness of specimen. The time required from $25^{\circ}C$ to $100^{\circ}C$ for 15mm-squared specimen was 9.6-11.2 minutes in silk worm oak and 7.6-8.1 minutes in Korean red pine. 3. The moisture content (M.C.) of specimen by steaming time was increased rapidly first 4 minutes in the both species, and moderately from 4 to 20 minutes and then slowly and constantly in silk worm oak, and moderately from 4 to 15 minutes and then slowly and constantly in Korean red pine. The M.C. of 15mm-squared specimen in 50 minutes of steaming was increased to 18.0 percent in the oak and 22.4 percent in the pine from the initial conditioned M.C. of 15 percent The rate of moisture adsorption measured was therefore faster in the pine than in the oak. 4. The mechanical properties of the both species were decreased significantly with the increase of boiling rime. The decrement by the boiling treatment for 60 minutes was measured to 36.6-45.0 percent in compressive strength, 12.5-17.5 percent in tensile strength, 31.6-40.9 percent in modulus of rupture, and 23.3-34.6 percent in modulus of elasticity. 5. The minimum bending radius (M.B.R.) of sapwood and heartwood was 60-80 mm and 90 mm in silk worm oak, and 260 - 300 mm and 280 - 300 mm in Korean red pine, respectively. Therefore, the both species showed better bending processing properties in sapwood than in heartwood. 6. The M.B.R. of edge-grained and flat-grained specimen in suk worm oak was 60-80 mm, but the M.B.R. in Korean red pine was 240-280 mm and 260-360 mm, respectively. Comparing the M.B.R. of edge-grained with flat-grained specimen, in the pine the edge-grained showed better bending processing property than the flat-grained. 7. The bending processing properties of the both species were improved by the rising of softening temperature from $40^{\circ}C$ to $100^{\circ}C$. The minimum softening temperature for bending was $90^{\circ}C$ in silk worm oak and $80^{\circ}C$ in Korean red pine, and the dependency of softening temperature for bending was therefore higher in the oak than in the pine. 8. The bending processing properties of the both species were improved by the increase of softening time as well as temperature, but even after the internal temperature of specimen reaching to the final temperature, somewhat prolonged softening was required to obtain the best plastic conditions. The minimum softening time for bending of 15 mm-squared silk worm oak and Korean red pine specimen was 15 and 10 minutes in the boiling treatment, and 30 and 20 minutes in the steaming treatment, respectively. 9. The optimum M.C. for bending of silk worm oak was 20 percent, and the M.C. above fiber saturation point rather degraded the bending processing property, whereas the optimum M.C. of Korean red pine needed to be above 30 percent. 10. The bending works in the optimum conditions obtained as seen in Table 24 showed that the M.B.R. of silk worm oak and Korean red pine was 80 mm and 240 mm in the boiling treatment, and 50 mm and 280 mm in the steaming treatment, respectively. Therefore, the bending processing property of the oak was better in the steaming than in the boiling treatment, but that of the pine better in the boiling than in the steaming treatment. 11. In the bending without a tension strap, the radio r/t of the minimum bending radius t to the thickness t of silk worm oak and Korean red pine specimen amounted to 16.0 and 21.3 in the boiling treatment, and 17.3 and 24.0 in the steaming treatment, respectively. But in the bending with a tension strap, the r/t of the oak and the pine specimen decreased to 5.3 and 16.0 in t he boiling treatment, and 3.3 and 18.7 in the steaming treatment, respectively. Therefore, the bending processing properties of the both species were significantly improved by the strap. 12. The effect of pin knot on the degradation of bending processing property was very severe in silk worm oak by side, e.g. 90 percent of the oak specimens with pin knot on the concave side were ruptured when bent to a 100 mm radius but only 10 percent of the other specimens with pin knot on the convex side were ruptured. 13. The changing rate in the bending radius of specimen bent to a 300 mm radius after 30 days of exposure to room temperature conditions was measured to 4.0-10.3 percent in the boiling treatment and 13,0-15.0 percent in the steaming treatment. Therefore, the degree of spring back after release was higher in the steaming than in the boiling treatment. And the changing rate of moisture-proofing treated specimen by expoxy resin coating was only -1.0.0 percent. 14. Formaldehyde, 35 percent solution, and 25 percent polyethylene glycol-400 solution found no effect on the plasticization of the both species, but saturated urea solution and 25 percent ammonium hydroxide solution found significant effect in comparison to non-treated specimen. But the effect of the treatment with chemicals alone was inferior to that of the steaming treatment, and the steaming treatment after the treatment with chemicals improved 10-24 percent over the bending processing property of steam-bent specimen. 15. Three plasticity coefficients - load-strain coefficient, strain coefficient, and energy coefficient - were evaluated to be appropriate for the index of bending processing property because the coefficients had highly significant correlation with the bending radius. The fitness of the coefficients as the index was good at load-strain coefficient, energy coefficient, and strain coefficient, in order.