• Geomechanics and Engineering
• /
• 제32권6호
• /
• pp.601-613
• /
• 2023

Low liquid limit silt, widely distributed in the middle and down reaches of Yellow River, has the disadvantages of poor grading, less clay content and poor colloidal activity. It is very easy to cause vehicle jumping at the bridge-embankment transition section when the low liquid limit silt used as the backfill at the abutment back. In this paper, a series of laboratory tests were carried out to study the physical and mechanical properties of the low liquid limit silt used as back filling. Ground granulated blast furnace slag (GGBFS) was excited by active MgO and hydrated lime to solidify silt as abutment backfill. The optimum ratio of firming agent and the compaction and mechanical properties of reinforced soil were revealed through compaction test and unconfined compressive strength (UCS) test. Scanning electron microscope (SEM) test was used to study the pore characteristics and hydration products of reinforced soil. 6% hydrated lime and alkali activated slag were used to solidify silt and fill the model of subgrade respectively. The pavement settlement regulation and soil internal stress-strain regulation of subgrade with different materials under uniformly distributed load were studied by model experiment. The effect of alkali activated slag curing agent on curing silt was verified. The research results can provide technical support for highway construction in silt area of the Yellow River alluvial plain.

• Geomechanics and Engineering
• /
• 제35권1호
• /
• pp.95-108
• /
• 2023

Soft soil ground is a crucial factor limiting the development of the construction of transportation infrastructure in coastal areas. Soft soil is characterized by low strength, low permeability and high compressibility. However, the ordinary treatment method uses Portland cement to solidify the soft soil, which has low early strength and requires a long curing time. Microbially induced carbonate precipitation (MICP) is an emerging method to address geo-environmental problems associated with geotechnical materials. In this study, a method of bio-cementitious mortars consisting of MICP and cement was proposed to stabilize the soft soil. A series of laboratory tests were conducted on MICP-treated and cement-MICP-treated (C-MICP-treated) soft soils to improve mechanical properties. Microscale observations were also undertaken to reveal the underlying mechanism of cement-soil treated by MICP. The results showed that cohesion and internal friction angles of MICP-treated soft soil were greater than those of remolded soft soil. The UCS, elastic modulus and toughness of C-MICP-treated soft soil with high moisture content (50%, 60%, 70%, 80%) were improved compared to traditional cement-soil. A remarkable difference was observed that the MICP process mainly played a role in the early curing stage (i.e., within 14 days) while cement hydration continued during the whole process. Micro-characterization revealed that the calcium carbonate filling the pores enhanced the soft soil.

• Composites Research
• /
• 제14권6호
• /
• pp.47-58
• /
• 2001

This paper describes applications of cure monitoring techniques by using embedded fiber optic strain sensors, which are extrinsic Fabry-Perot interoferometric (EFPI) and/or fiber Bra99 grating (FBG) sensors, to three kinds of molding methods of autoclave, FW and RTM molding methods. In these applications, internal strain of high-temperature curing resin was monitored by EFPI sensors. From theme experimental results, it was shown that strain caused by thermal shrink at cooling stage could be measured well. In addition, several specific matters to these molding methods were considered. As thor an autoclave molding of unidirectional FRP laminates, it was confirmed that off-axis strain of unidirectional FRP could be monitored by EFPI sensors. As for FW molding using room-temperature (RT) cured resin, it was found that the strain outputs from EFPI sensors represented curing shrinkage as well as thermal strain and the convergence meant finish of cure reaction. It was also shown that this curing shrinkage should be evaluated with consideration on logarithmic change in stiffness of matrix resin. As for a RTM melding, both EFPI and FBC sensors were employed to measure strain. The results showed that FBG sensors hale also good potential for strain monitoring at cooling stage, while the non-uniform thermal residual strain of textile affected the FBG spectrum after molding. This study has proven that embedded fiber optic strain sensors hale practical ability of cure monitoring of FRP. However, development of automatic installation methods of sensors remains as a problem to be solved for applications to practical products.

• 한국건설관리학회논문집
• /
• 제20권1호
• /
• pp.133-140
• /
• 2019

콘크리트 타설현장의 조건은 콘크리트 강도에 커다란 영향을 주며, 따라서 콘크리트 배합은 콘크리트 타설시 현장조건을 반영할 수 있도록 설계되어야 한다. 즉, 콘크리트 배합은 현장양생온도, 작업환경, 타설방법 등을 고려하여 최적화하는 노력이 필요하다. 본 연구목적은 현장 콘크리트 타설시 발생하는 양생온도와 작업지연 등 외부영향인자를 고려하여 가장 대응을 잘 할 수 있는 콘크리트 배합설계를 제공하는 것이다. 연구목적을 달성하기 위해서 본 연구에서는 로버스트 설계방법을 콘크리트 배합설계에 적용했다. 사례분석에서는 양생온도와 작업지연 등 외부영향요인과 함께 콘크리트 성분의 조합을 적용하여 콘크리트 실내 테스트를 실시했다. 실험결과 로버스트 설계방법을 적용할 경우 외부영향요인이 주어 졌을 때 가장 효과적으로 대응을 할 수 있는 콘크리트 배합설계를 선정할 수 있다는 것을 알 수 있었다.

• 대한한의학원전학회지
• /
• 제24권1호
• /
• pp.95-105
• /
• 2011

The cough is generally known as a symptom occurred from Lung. But it was descriptive of the symptom every internal organs can cause in "HwangjenaegyeongSomun Haelon". The reason is that, when a pathogenic Gi attack human body, the body skin which have the relationship to Lung is attacked firstly. But the internal organs preside over each seasons of the year, so the season's presiding organ is ultimately attacked. And in "Somun Haelon" the partner symptoms of five solid organs cough and six hollow organs cough are being described, so we can distinguish between each internal organs coughs. Clinically, the cough is most common symptom and one of the most difficult symptom. In my opinion, the origin organ of cough is very various, but the doctor fix their thinking to the Lung, so the cough became a most difficult symptom. This thesis describe pathogenesis and partner symptoms of five solid organs cough and six hollow organs cough. And illustrate clinical examples and some medical prescriptions. Intend to show that various treatment after differentiation of syndromes[辨證施治] surely needed for effective curing of a cough.

• 동의생리병리학회지
• /
• 제21권1호
• /
• pp.333-337
• /
• 2007

Cellulitis is a infectious disease characterized by acute purulent inflammation clinically manifested by erythema, pain or heating sensation caused by palpation, chilling sign and mild to moderate fever. in western medicine most part of the treatment is focused on injecting routine antibiotics hoping for the pathogen(in the case bacteria) to be treated but instead causing the bacteria to be resistant to antibiotics and consequently leads to longer admission. In oriental medicine Cellulitis belongs to the cathegory of Ong(癰), Bal(發) or Dandok(丹毒) on symptoms. The chief cause of acute Cellulitis is the evil of wet and heat blended and the postraumatic infection evil. We experienced a case of acute cellulitis defined as Bicheonbal(비천발) and Chokbaebal(足背發). We attempted to use both methods using acupuncture, herbal medicine(Gamidangkwuijeomtong-tang(加味當歸拈痛湯)) as well as routine antibiotic treatment and as a result we have achieved remarkable results in laboratory tests though there was no difference in shortening the curing process compared to the average time that it take to cure when admitted to western medical center.

• 한국지반공학회논문집
• /
• 제39권7호
• /
• pp.17-30
• /
• 2023

본 논문에서는 직접전단시험을 이용하여 수침이나 고온이 고결모래의 전단강도에 미치는 영향에 대해 연구하였다. 고결제로 초속경 시멘트와 에폭시 수용액을 사용하여 표준사인 주문진표준사를 고결시켰다. 고결제는 4, 8, 또는 12%로 혼합한 다음 다짐방식으로 직경 64mm, 높이 25mm의 원주형 고결 공시체를 제작하였다. 양생일은 모두 3일로 동일하며, 양생조건은 대기중 양생, 수침 및 가열 조건이다. 여기서 가열 조건은 수침한 공시체를 전자레인지로 3분씩 3회 반복하여 공시체 내부에 90℃ 정도의 고온을 발생시켰다. 고결제의 종류에 관계없이 고결제 함유량이 증가할수록 고결모래의 점착력은 증가하였으나, 내부마찰각은 약간 증가하거나 오히려 감소하였다. 초속경 시멘트 고결모래에 비해 에폭시 고결모래가 평균적으로 점착력은 5배, 마찰각은 10° 정도 높게 나타나 더 높은 강도를 보였다. 전반적으로 고결제의 종류에 관계없이 수침 시 전단강도는 감소하고 가열 시 전단강도는 증가하였다. 특히, 에폭시 고결모래의 경우 가열 시 점착력은 평균 3배, 내부마찰각은 20° 이상 증가하였다.

• 한국건축시공학회지
• /
• 제11권3호
• /
• pp.283-291
• /
• 2011

본 연구는 건설공사 현장에 적용되고 있는 무선센서네트워크 관련 기술현황을 검토하고, USN 기반의 콘크리트 양생온도 관리방법에 대한 현장적용성 실험을 통하여 그 개선 방안을 도출하는데 목적이 있다. 건설분야에서의 USN 관련연구는 주로 공사의 품질관리 및 시설물 유지관리, 안전관리를 중심으로 이루어지고 있으나, 현장여건 및 통신네트워크 등 실용화를 위한 세부적인 연구가 필요한 것으로 나타났다. 또한 현장사무실에서의 실시간 원격모니터링에 의한 콘크리트의 온도관리가 콘크리트내 소형의 무선센서를 활용 하여 USN 환경에서도 가능한 것을 알 수 있었다. 다만, 센서의 매립깊이에 따른 전파인식정도나 내장건전지의 전력소모 및 전송방식 등 현장에서의 가변적 상황에 대응할 수 있는 보다 안정화된 다양한 시스템 구축을 위한 연구가 필요한 것으로 나타났다.

• 대한한의학회지
• /
• 제20권2호
• /
• pp.98-107
• /
• 1999

This study aimed to find out Oyo-Tang's effects on allergic asthma using the Egg-White Implant(EWI) method model recommended by Siqueira et al. Oyo-Tang has widely been prescribed and used in Oriental Medicine for controlling and curing of cough, nasal obstruction, pharyngeal pain and hoarseness. Previous studies have demonstrated that Oyo-Tang has analgesic, sedative, anticonvulsive, antitussive and antihistamine effects. But it was uncertain whether Oyo-Tang could inhibit the allergic reactions, to alleviate the symptoms of allergic asthma. With such aim. the respiratory patterns and eosinophil infiltration in the tracheal mucosa of rats with experimentally induced allergic asthma (using EWI method) were mainly observed. The results are as follows: 1. Oyo-Tang decreased the number of poor respiration with respect to control group (P<0.05) 2. Oyo-Tang decreased the number of eosinophils infiltrated in tracheal mucosa with respect control group (P<0.05). The above results demonstrate that Oyo-Tang has the inhibitory effects on the process allergic asthma and suggest that it could be used in relieving patients of the symptoms caused allergic asthma.

• 대한한의학회지
• /
• 제16권2호
• /
• pp.281-298
• /
• 1995

The following results were made by observation GOT, GPT, ALP, total cholesterol and higlyceride in serum to research the effects of medicines which are Injinsaryungsan(Sample- A) and another medicine(Sample-B) of which Injin(Artemisiae Capillaris Herba)was increased in quantity on liver damaged by $CCl_4$ and d-galactosamine in rats. 1. The high concentrated extracts of Sample A group and Sample- B group showed significant inhibltory effects on the increase of serum GPT, ALP, LDH, total cholesterol and triglyceride levels induced by $CCl_4$ and d-galactosamine. 2. The high concentrated extracts of sample A group and Sample B group showed more significant inhibitory effects(P〈0.001) than the low ones' effects(P〈0.01) on the increase of serum triglyceride level induced by $CCl_4$ 3. Sample-A group showed significant inhibitory effects on the increase of serum GOT, GPT. ALP, total cholesterol and triglyceride levels, but no significance on the increase of serum LDH level induced by d-galactosamine. 4. Sample-B group showed very significant inhibitory effects on the increase of serum GOP, GPT, ALP, LDH, total cholesterol and triglyceride levels induced by d-galactosamine. 5. As compared with Sample-A group, Sample-B group of which Injin was increased in quantity showed more significant inhibitory effects on all items of this experiment induced by $CCl_4$ and d-galactosamine. As mentioned above. it seemed that both Injinsaryungsan and another medicine of which Injin was increased in quantity had effects protecting liver and anti-fatty liver induced by $CCl_4$ and d-galactosamine in rats. Specially Sample-B group had very significant effects on liver damage as compared with Sample-B group. Therefore it seems that more researches on variation according to the increase of Injin dose must be continued for curing liver diseases.