• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.690-692
• /
• 2014

To identify characterization of a simple extension chamber that have the two internal partition, produce the curve to estimate the transmission loss without the computer analysis. For helpful for internal optimum design, identify the characteristic of internal partition on transmission loss. Made estimated transmission loss curve by function of relationship of internal partition and transmission. Check the similarity of predicted transmission loss and analysis transmission loss. Usage of the predicted transmission loss made by relationship of internal partition and transmission loss is good information to place the internal partition so as to maximize the transmission loss on target frequency at optimal design on muffler.

• 혜화의학회지
• /
• 제23권2호
• /
• pp.33-38
• /
• 2015

The purpose of this study was to report the effect of Bogijetong-tang on post-herpetic neuralgia(PHN). The main symptoms were numbness, pain, burning, paresthesia on left dorsum pedis and insomina. We prescribed Bogijetong-tang (BJT) three times a day and performed acupuncture and moxibustion twice a day. We observed the change of symptoms to evaluate the therapeutic effect. The symptoms were evaluated with numerical rating scale(NRS). After the treatment, pain decreased from 8 to 3, burning from 5 to 1, paresthesia from 7 to 5, numbness from 5 to 3 and insomina improved. Above the results, Bogijetongtang is effective in treating post-herpetic neuralgia.

• 대한화학회지
• /
• 제21권4호
• /
• pp.256-261
• /
• 1977

새로이 合成한 화합물인 trans-2-butenedial bishydrazone의 AA'BB' 型 NMR 스펙트럼에 나타난 피이크는 모두 2개의 line이 重疊되어 있어서 보통의 방법으로는 internal check이 불가능하다. 5가지 파라미터 ${\delta}$, K, M, N, L을 漸次的으로 변화시켜 二重線의 中間點이 실제 line의 위치에 接近하게끔 함으로써 정확한 line의 位置를 알아내었으며 그 결과로부터 chemical shift와 coupling constant의 값을 구하였다.

• 품질경영학회지
• /
• 제30권2호
• /
• pp.1-10
• /
• 2002

A performance evaluation model of an R&D module in the quality management system for M Company Is constructed using QFD. The company produces telecommunication devices and employs the performance evaluation model based on ISO 9000 family. However, the model has some problems, one of them is that all check items are regarded as equally important Customer requirements are gathered from internal customers and QFD is utilized to obtain weights for each check item.

• Korean Journal of Acupuncture
• /
• 제21권2호
• /
• pp.177-192
• /
• 2004

Objectives : This study is designed to investigate the pathology, acupuncture and moxibustion therapy applicable of the dementia through literature of oriental medicine. Results : The findings of this study are as follows ; 1. The cause of dementia is internal damage of seven emotions(七情內傷), deficiency of the kidney essence(腎精不足), retention of dampness in the mental(痰迷心竅). 2. The acupuncture meridians used often for dementia are $Tok-maek(GV),\;Chok-t'aeyang\;Pang-gwang-Ky\check{o}ng(BL),\;Chok-yangm\check{o}yng\;Wi-Ky\check{o}ng(ST),\;Su-gwor\check{u}m\;Shimp'o-Ky\check{o}ng(PC),\;Su-so\check{u}m\;Shim-Ky\check{o}ng(HT)$. 3. The spots on the body suiTable for acupuncture used for therapy of the dementia are 98 points and extra points are 6 points, total therapeutic acupunture points are 104 points. And acupunture points are frequently used Shinmun(神門-HT7, 24), Paek'oe(百會-GV20, 19), Chok-samni(足三里-ST36, 18), Sugu(水溝-GV26, 17), P'ungnyung(豊隆-ST40, 16), Taech'u(大椎-GV14, 14), $Sam\check{u}mgyo(三陰交-SP6,\;14)$, Shimsu(心兪-BL15, 14), $Taen\check{u}ng(大陵-PC7,\;11)$, Nogung(勞宮-PC8, 11), Sosang(少商-LU11, 10), Kansa(間使-PC5, 10), Naegwan(內關-PC6, 10). 4. The acupoints used often on moxibustion are Paek'oe(百會-GV20), Chang-gang(長强-GV1), Taech'u(大椎-GV14), Kansa(間使-PC5). Conclusion : It is recommended that further study of many sided investigations in the future.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.219-222
• /
• 2005

Recently, the interest of the engine capacity and environment of the atmosphere is increasing, so the researches for the engine capacity have been conducted for a long time. But the internal environment of an automotive engine is very severe. A piston is exposed to combustion gas of over $2000^{\circ}C$ and strong friction is occurred by high speed motion in the cylinder. The fraction between piston and wall of the cylinder causes the increase of temperature in the engine. The temperature of the engine has an effect on the engine capacity. If the temperature is high, the capacity of the engine is low. So we have to maintain the optimum temperature. To maintain the optimum temperature, the enough flow rate of the engine oil is needed. The oil jet is used to control the flow rate of the engine oil and supply the engine oil to the piston and cylinder. The purpose of this study is to check the mass flow rate of the engine oil and the characteristics of internal flow of the oil jet. Flow pattern of the engine oil is very important because it concludes the loss in the oil jet. This study is the previous research about the oil jet and we will consider the movement of the ball check valve to get more accuracy result.

• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.61-70
• /
• 1994

This study was executed to find the applicability of press drying of tree disk by investigating the shrinkage and drying defect and to form appropriate model by comparing the actual moisture content(MC) and internal temperature in respect of drying time with calculated values based computer simulation to which was applied finite difference method. In press drying disk, heating period, constant drying rate period maintained plateau temperature at 100$^{\circ}C$ and falling drying rate period were significantly distinguished. Actual MC and internal temperature were analogous to those calculated at comparing points. Heat transfer model formed by Fourier's law using specific heat of moist wood and conduction coefficient considering fractional volume of each element of wood cell wall, bound water, free water and air showed applicability as basic data to developing heat expansion, shrinkage and drying stress during press drying. Also mass transfer model formed by Fick's diffusion law using water vapor diffusion coefficient showed applicability. Longitudinal shrinkage was developed by pressure of hot press and tangential shrinkage was restrained by hygrothermal recovery. The heart check, surface check and ring failure were occurred differently in species, but V-shaped crack didn't develop.

• Journal of Forest and Environmental Science
• /
• 제12권1호
• /
• pp.1-12
• /
• 1996

강원도산(江原道産) 참나무과(科) 4수종(樹種)의 건조특성(乾操特性)을 파악코져 $100^{\circ}C$에서 급속건조(急速乾操)를 실시하여 건조중(乾操中) 함수율(含水率)과 건조경과(乾操經過), 초기할열(初期割裂)(목구할열(木口割裂)과 표면할열(表面割裂)), 찌그러짐, 내부할열(內部割裂) 등의 건조결함(乾操缺陷)을 조사하여 추정건조(推定乾操)스케쥴을 작성한 결과(結果)는 다음과 같다. 건조시간별(乾操時間別) 건조중(乾操中) 함수율(含水率)은 초기함수율(初期含水率)이 높은 판재일수록 급속(急速)한 곡선적(曲線的) 감소(減少)를 나타내었고 건조소요시간(乾操所要時間)은 두께가 두꺼울수록, 초기함수율(初期含水率)이 높을수록, 건조중(乾操中) 함수율(含水率) 변화( 變化)가 느린 수종(樹種)일수록 길었다. 또한, 두께가 두꺼울수록 할열(割裂)의 발생량(發生量)이 증가하므로 건조초기(乾操初期)의 조건(條件)을 완화하게 해야 함을 알 수 있었다.

• Journal of Forest and Environmental Science
• /
• 제11권1호
• /
• pp.50-60
• /
• 1995

낙엽송과 잣나무의 판재두께별 건조특성(乾操特性)을 파악코져 $100^{\circ}C$에서 급속건조(急速乾燥)를 실시하여 건조중 함수율(含水率)과 건조경과(乾操經過), 건조속도(乾操速度), 초기할렬(初期割裂), collapse, 내부할렬(內部割裂)등의 건조결함(乾操缺陷)을 조사하여 추정건조(推定乾操)스케쥴을 작성한 결과는 다음과 같다. 건조시간별(乾操時間別) 건조중(乾操中) 함수율(含水率)은 판재두께가 얇을수록 급속한 곡선적 감소(減少)를 나타내었고 함수율(含水率) 20%에서 낙엽송의 건조속도(乾操速度)는 잣나무재보다 크고, 판재두께가 두꺼울수록 적었다. 추정건조(推定乾操)스케쥴을 작성한 결과 닥엽송은 잣나무재에 비해 건조조건(乾操條件)을 완화하게 해야 하고 판재 두께가 두꺼운 5cm, 6cm에서는 건조초기(乾操初期)의 조건(條件)을 가장 완화하게 해야 함을 알 수 있었다.

• Journal of Forest and Environmental Science
• /
• 제10권1호
• /
• pp.38-48
• /
• 1994

강원도산(江原道産) 참나무과(科) 4수종(樹種)의 건조특성(乾燥特性)을 파악코져 $100^{\circ}C$에서 급속건조(急速乾燥)를 실시하여 건조중(乾燥中) 함수율(含水率)과 건조경과(乾燥經過), 초기할렬(初期割裂)(목구할렬(목구할렬(木口割裂))과 표면할렬(表面割裂)), 찌그러짐, 내부할렬(內部割裂) 등의 건조결함(乾燥缺陷)을 조사(調査)하여 추정건조(推定乾燥)스케쥴을 작성(作成)한 결과(結果)는 다음과 같다. 건조시간별(乾燥時間別) 건조중(乾燥中) 함수율(含水率)은 초기함수율(初期含水率)이 높은 판재(板材)일수록 급속(急速)한 곡선적(曲線的) 감소(減少)를 나타내었고 건조소요시간(乾燥所要時間)이 길었으며 굴참나무가 건조중(乾燥中) 할렬(割裂)의 발생량(發生量)이 가장 크게 나타났으며 구해진 추정건조(推定乾燥)스케쥴은 $T_5-C_2$였다. 또한 모든 수종(樹種)의 목리방향별(木理方向別) 수축율(收縮率)은 접선방향(接線方向)(T) > 방사방향(放射方向)(R) > 섬유방향(纖維方向)(L)의 순위(順位)였으며 급속건조법(急速乾燥法)에 의한 수축율(收縮率)이 정상적인 수축율(收縮率)보다 크게 나타났다.