• 한국기후변화학회지
• /
• 제6권3호
• /
• pp.175-184
• /
• 2015

In this study GC and PAS were used to calculate $N_2O$ concentration of exhaust gas from Wood Chip combustion system. Fuel supplied to the incinerator was collected and analyzed and then the analysis result was used to calculate $N_2O$ emissions. Tier 3 and Tier 4 Method were used to calculate the $N_2O$ emissions. Plant's Specific emission factor of $N_2O$ by Tier 3 Method was 0.35 kg/TJ, while default emission factor of Wood?Wood Waste proposed by 2006 IPCC G/L was 4 kg/TJ. So the $N_2O$ emission factor of this study was 3.65 kg/TJ lower compared to the IPCC G/L. The total emissions calculated by Plant's specific emission factor was 4.22 kg during the measuring period, but by Tier 4 Method it was 7.88 kg. This difference in emissions was caused by the difference of continuous measuring and intermittent sampling. It would be necessary to apply continuous measuring to calculate emissions of $Non-CO_2$ gas whose the density distribution is relatively high. However currently, according to the target management guideline of greenhouse gas and energy, the continuous measuring method to calculate greenhouse gas emission is applied only to $CO_2$. Therefore for reliable greenhouse gas emission calculation it would be necessary to apply continuous measuring to calculate $Non-CO_2$ gas emission.

• 대한기계학회논문집
• /
• 제12권5호
• /
• pp.1035-1042
• /
• 1988

본 연구에서는 단순절삭의 특성과 관련된 신호처리 방법을 검토하고, 선삭의 경우와 달리 제기되는 문제점중의 하나인 센서의 부착위치를 예비실험을 통하여 결정 하며, 공구마멸의 진전에 따른 AE신호의 특성변화를 조사하여 공구마멸 자동감지의 기 초가 되는 공구마멸의 점진적 증가에 따른 AE신호의 특성변화를 관찰하고자 한다. 특히 절삭조건 즉 이송량, 절석깊이, 절삭속도, 그리고 정착된 인서트의 수가 AE신호 의 특성에 미치는 영향을 각각 조사하여 절삭조건의 변화에 따른 AE신호의 변화경향을 살펴보고자 한다.

• 한국토양비료학회지
• /
• 제36권1호
• /
• pp.41-49
• /
• 2003

물관리와 유기물 시용이 다른 논에서 메탄 배출을 측정하였다. 벼 식물체를 통해 배출되는 메탄을 측정하기 위하여 벼를 심은 chamber와 심지 않은 chamber를 반복으로 포장에 설치하였다. 기체시료는 벼 재배기간중 주 1회 채취하였다. 상시담수에서는 벼를 심은 NPK구, NPK(+P),는 $0.174g\;CH_4\;m^{-2}\;d^{-1}$의 배출을 보였으나 심지 않은 NPK구, NPK(-P),는 $0.046g\;CH_4\;m^{-2}\;d^{-1}$의 배출을 보였다. 벼를 심은 볏짚퇴비 시응구, RSC(+P), 는 $0.214g\;CH_4\;m^{-2}\;d^{-1}$의 배출을 보였으나 심지 않은 볏짚퇴비 시용구, RSC(-P),는 $0.076g\;CH_4\;m^{-2}\;d^{-1}$의 배출을 보였다. 볏짚을 2월에 시용하고 벼를 심은 시험구, RS2(+P), 는 $0.328g\;CH_4\;m^{-2}\;d^{-1}$의 배출을 보였으나 볏짚을 2월에 시용하고 벼를 심지 않은 시험구, RS2(-P),는 $0.1g\;CH_4\;m^{-2}\;d^{-1}$의 배출을보였다. 볏짚을 5월에 시용하고 벼를 심은 시험구, RS5(+P). 는 $0.414g\;CH_4\;m^{-2}\;d^{-1}$의 배출을 보였으나 볏짚을 2월에 시용하고 벼를 심지 않은 시험구, RS5(-P),는 $0.187g\;CH_4\;m^{-2}\;d^{-1}$의 배출을 보였다. 간단관개에서는 NPK(+P)는 $0.115g\;CH_4\;m^{-2}\;d^{-1}$의 배출을 보였으나 NPK(-P)는 $0.041g\;CH_4\;m^{-2}\;d^{-1}$의 배출을 보였다. RSC(+P)는 $0.137g\;CH_4\;m^{-2}\;d^{-1}$의 배출을 보였으나 RSC(-P)는 $0.06g\;CH_4\;m^{-2}\;d^{-1}$의 배출을 보였다. RS2(+P) 는 $0.204g\;CH_4\;m^{-2}\;d^{-1}$의 배출을 보였으나 RS2(-P)는 $0.09g\;CH_4\;m^{-2}\;d^{-1}$의 배출을 보였다. RS2(+P)는 $0.273g\;CH_4\;m^{-2}\;d^{-1}$의 배출을 보였으나 RS5(-P)는 $0.13g\;CH_4\;m^{-2}\;d^{-1}$의 배출을 보였다. 상시담수 처리에서 벼 식물체를 통한 메탄 수송은 NPK구, RSC구 (볏짚퇴비를 5월에 시용한 구), RS2구(볏짚을 2월에 시응한 구)와 RS5구 (볏짚을 5월에 시용한 구)에서 각기 73.6 %, 64.5%, 69.5%, 54.8%였었고 평균 65.6%였었다. 간단관개처리에서 벼 식물체를 통한 메탄 수송은 NPK구, RSC구, RS2구와 RS5구에서 각각 64.3, 59.2, 55.9, 52.4였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.919-922
• /
• 1997

In this study, the amount of WC and group N elements of Ti(C, N) cermet tool was investigated. The composition of WC was changed from 5 to 20% to determine the effect of WC on the cutting performance of cermet tool. The more WC was added, the longer the tool life of the cermet tool was. The cermet with 20% WC showed the best fracture toughness. The effect of group N elements ; ZrC, ZrN and HfC was also investigated by adding each of them to manufacture the cermet tool with fixed 14% WC composition. The cermet with 1% group N ZrC and 14% WC showed the best cutting performance among the investigated cermet tools.

• 한국농공학회지
• /
• 제43권6호
• /
• pp.143-153
• /
• 2001

Hog manure amended with sawdust (moisture 56~60% wet basis, C/N 19-21) was composted in pilot-scale vessels using continuous aeration(CA) and intermittent aeration(IA) for 3 and 4 weeks. In two subsequent runs of the same duration, composts resulting from each of the first runs were used as a biofilter on the exhaust gas from newly composting material. Conditions between each of these paired sets appeared to be similar. Ammonia was released from the biofilter material during the first week of stabilization while the compost produced ammonia after the first week of composting. In both cases substantial absorption, 61~96 %, of ammonia production from the composting raw material was achieved in the stabilizing material during the final weeks of operation and indicates the use of the stabilizing hog manure/sawdust compost as a biofilter can reduce ammonia emissions. Total $NH_3-N$ emissions during run 2 in IA was less than 2/3 of those in CA. Dry solids loss for the stabilized compost (6~8 weeks) was 19~46%.

• 한국토양비료학회지
• /
• 제48권5호
• /
• pp.477-484
• /
• 2015

Environmental effect of water-saving irrigation on the emissions of greenhouse gases (GHGs) has not been well investigated. The objective of this study was to measure the effect of water-saving irrigation on GHGs as well as water use and rice production yield in paddy field condition in Korea. Four experimental runoff plots of 4x35 m in size were prepared at an existing paddy field. GHGs emission was measured during the 2012~2013 growing seasons while a Japonica rice variety was cultivated. Four different water management methods, 1) Continuous Flooding (CF), 2) Intermittent Drainage (ID), 3) Water Saving (WS), and 4) CF+WS, were used during a rice growing season to compare the effects of water management methods on GHGs emission. CF method is flooding all the time, ID method makes paddy water drained 40 days after transplanting for about two weeks, WS method maintains 2~3 cm water-level, which should be refilled when the water-level decreased to about 0 cm, and CF+WS method combines CF method before 30 days after transplanting (DAT) and WS method after 30 DAT. Regardless of water management methods, paddy field water was drained about 30 days before harvest. Amount of GHGs emission from WS plot was reduced by 69.3% compared to that from CF plot and by 59.0% compared to that from ID plot. Amount of GHGs emission from CF+WS plot was reduced by 60.7% compared to that from CF plot and by 47.5% compared to that from ID plot. Weed occurrence in CF+WS plots was reduced to 62.2% in comparison with the WS plot, implying that CF+WS plot showed the best effect to mitigation of the greenhouse gas emission in the atmosphere.

• 한국기후변화학회지
• /
• 제6권3호
• /
• pp.233-241
• /
• 2015

In 2014, the United Nations Framework Convention on Climate Change (UNFCCC) agreed to submit the Intended Nationality Determined Contributions (INDCs) at the conference of parties held in Lima, Peru. Then, the South Korean government submitted the INDCs including GHGs reduction target and reduction potential on July, 2015. The goal of this study is to predict GHGs emission and to analyze reduction potential in agricultural sector of Korea. Activity data to estimate GHGs emission was forecast by Korea Agricultural Simulation Model (KASMO) of Korea Rural Economic Institute and estimate methodology was taken by the IPCC and guideline for MRV (Measurement, Reporting and Verification) of national greenhouse gases statistics of Korea. The predicted GHGs emission of agricultural sectors from 2021 to 2030 tended to decrease due to decline in crop production and its gap was less after 2025. Increasing livestock numbers such as sheep, horses, swine, and ducks did not show signigicant impact the total GHGs emission. On a analysis of the reduction potential, GHGs emission was expected to reduce $253Gg\;CO_{2-eq}$. by 2030 with increase of mid-season water drainage area up to 95% of total rice cultivation area. The GHGs reduction potential with intermittent drainage technology applied to 10% of the tatal paddy field area, mid-drainage and no organic matter would be $92Gg\;CO_{2-eq}$. by 2030.

• 한국기후변화학회지
• /
• 제3권2호
• /
• pp.129-142
• /
• 2012

본 연구는 벼 생산에 필요한 농자재의 제조와 벼 재배과정 그리고 농자재의 폐기과정에서 발생되는 탄소성적을 산정하고, 주요한 온실가스인 메탄의 발생 저감을 위한 재배기술을 비교평가하기 위해 수행되었다. 벼 생산 단계에서 탄소 발생량은 투입된 농자재의 물량을 기준으로 농자재와 에너지의 제조단계에서 탄소발생량, 농작물 생육 단계에서는 시비질소 유래 아산화질소 발생량과 에너지 소비에 탄소 발생량, 농법에 따른 메탄발생량 그리고 농자재의 폐기에 따른 탄소발생량의 합으로 산정할 수 있다. 벼 1 kg 생산 단계에서 발생되는 이산화탄소는 1.40 kg이었으며, 발생된 온실가스 배출비율은 벼 생육 단계에서 메탄 유래 탄소발생량이 71.1%로 가장 많았고, 다음으로 시용된 질소에 의한 아산화질소 유래 탄소발생량이 11.8%였으며, 복합비료 제조단계에서 발생된 탄소발생량이 7.6%에 달하였다. 벼 재배기술 별 메탄 발생량을 비교한 결과, 중만생종 대비 조생종 품종재배로 44.4%, 늘 물대기 대비 중간 물떼기로 43.8%, 암거배수처리로 38.7%, 이앙재배 대비 직파재배로 32.0%, 경운 대비 무경운 재배로 20.9%의 감축 효과가 있는 것으로 나타났다. 향후 전과정 지구온난화 평가방법을 이용하여 온실가스 감축 실적의 측정-보고-검증 체계 구축이 필요하며, 이는 탄소배출권 거래제나 저탄소농산물 인증제의 과학적 근거를 제시하는 데 기여할 것이다.

• Journal of Korean Neurosurgical Society
• /
• 제42권5호
• /
• pp.413-415
• /
• 2007

A 26-year-old man was admitted to our department due to intermittent left hemiparesis for 3 months. Magnetic resonance Image showed subacute infarction in the right precentral gyrus. Digital subtraction angiography and magnetic resonance angiography revealed an aneurysmal protrusion at the right middle cerebral artery (MCA) bifurcation. It was difficult to differentiate the aneurysm from the occlusion of the middle trunk of the MCA trifurcation. Brain single photon emission computerized tomography showed a decrease in perfusion in the right posterior frontal lobe without vascular reserve. Therefore, we planned a superficial temporal artery MCA anastomosis with an exploration of the right MCA bifurcation. Intraoperatively, the aneurysmal opacification on preoperative angiography proved to be the proximal stump of the occluded middle trunk of the MCA trifurcation. An aneurysmal protrusion at the MCA bifurcation does not always indicate an aneurysm. In diagnosing protruding vascular lesions at the MCA bifurcation, the possibility of a vascular stump should be considered according to their angioanatomical appearance and the history of the patient.

• 한국분무공학회지
• /
• 제7권1호
• /
• pp.14-20
• /
• 2002

It is well known that the flow and spray characteristics is critical factor on the performance and emission of a direct injection diesel engine. So this study aims to investigate the interaction of flow and spray characteristics. At first, in cylinder flow distributions in swirl adaptor for 4-valve cylinder head of DI Diesel engine were investigated under steady conditions for different SCV angles mounted on the cylinder head with steady rig test and 2-D LDV. And the in-cylinder flow was quantified in terms of mean flow coefficient and swirl ratio/tumble ratio. It was found that the swirl ratio is controlled between 2.3 and 3.8. Then spray characteristics of the intermittent injection were investigated. PDA system was utilized for measurement of a droplet size and velocity. The analyses of the PDA results are carried out with Time Dividing Method. It was found that there is a correlation between the swirl flow and SMD. The droplet size and the velocity were nearly constant value with each SCV angle. And the swirl ratio is higher, SMD smaller. The swirl ratio was helpful factor to the atomization of droplet.