• Clinical and Experimental Reproductive Medicine
• /
• 제20권2호
• /
• pp.125-130
• /
• 1993

Polycystic ovarian syndrome (PCOS) patients have a characteristic of high leuteinizing hormone (LH) to follicle -stimulating hormone (FSH) ratio. Usually, human menopausal gonadotropin (hMG) is used to induce ovulation in clomiphene citrate-resistant PCOS patients. However, HMG contains two components, namely, LH and FSH, with 50%, respectively. Therefore, FSH is theoretically recommended to stimulate follicular maturation. From the pituitary, LH is secreted by pulsatile pattern. So, we have been using intermittent subcutaneous injection of pure FSH for ovulation induction in 10 PCOS patients from March, 1990 to August, 1992. We obtained good results by intermittent subcutaneous injection of pure FSH. Ovulation is 100% per patient, and 88.2% per cycle. Pregnancy rate is 80% per patient, and 23.5% per cycle. Ovarian hyperstimulation syndrome (OHSS) is 50% per patient, 41.2% per all cycles, and 46.7% per all ovulated cycles. In comparison with HMG, pregnancy rate per cycle is relatively low. But, ovulation rate and pregnacy rate per person is higher than HMG. Because of the strict check of ovaries by the vaginal ultrasonography, OHSS rate is relatively high.

• 대한수의학회지
• /
• 제45권2호
• /
• pp.263-271
• /
• 2005

To compare the sedative effects using intermittent intravenous bolus injection with tiletamine-zolazepam (n = 5, TZ group), xylazine-ketamine (n = 5, XK group) and propofol (n = 5, PI group), we investigated the changes of hemodynamic (heart rate, arterial pressure), $SpO_2$, rectal temperature, respiratory rate and pain score during 60 minute sedation and 40 minute recovery period in beagle dogs. The value of rectal temperature was significantly higher in PI groups (p<0.05) during recovery period. The value of heart rate was significantly lower in XK group (p<0.05) during sedation. The changes of respiratory rate were similar tendency in all groups. The change of $SpO_2$ was stable during sedation and value was significantly higher in PI group (p<0.05) during recovery period. The value of systolic arterial pressure (SAP) was significantly lower in XK group (p<0.05) than PI group during sedation and recovery period. Low analgesic effect occurred in PI group. We concluded that intravenous anesthesia by intermittent bolus injection with propofol is useful in stabilizing rectal temperature, $SpO_2$ and hemodynamic during sedation and provide fast recovery, but have low analgesic effect.

• Journal of Mechanical Science and Technology
• /
• 제16권8호
• /
• pp.1135-1143
• /
• 2002

The intermittent spray characteristics of the single-hole diesel nozzle (d$\sub$n/=0.32 mm) used in the fuel injection system of heavy-duty diesel engines were experimentally investigated. The mean velocity and turbulent characteristics of the diesel spray injected intermittently into the still ambient were measured by using a 2-D PDPA (phase Doppler particle analyzer) . The gradient of spray half-width linearly increased with time from the start of injection, and it approximated to 0.04 at the end of the injection. The axial mean velocity of the fuel spray measured along the radial direction was similar to that of the free air jet within R/b= 1.0-1.5 regardless of elapsing time, and its non-dimensional distribution corresponds to the theoretical velocity distributions suggested by Hinze in the downstream of the spray flow fields. The turbulent intensity of the axial velocity components measured along the radial direction represented the 20-30% of the U$\sub$cι/ and tended to decrease in the outer region. The turbulent intensity in the trailing edge was higher than that in the leading edge.

• 한국자동차공학회논문집
• /
• 제6권5호
• /
• pp.174-181
• /
• 1998

Experimental and analytical studies are presented to characterize the break-up mechanism and atomization processes of the intermittent- impinging-type nozzle. Gasoline jets passing through the circular nozzle with the outlet diameter of 0.4mm and the injection duration of 10ms are impinged on each other. The impingement of fuel jets forms a thin liquid sheet, and the break-up of the liquid sheet produces liquid ligaments and droplets subsequently. The shape of liquid sheets was visualized at various impinging velocities and angles using the planer laser induced fluorescence (PLIF) technique. Based on the Kelvin-Helmholtz wave instability theory, the break-up length of liquid sheets and the droplet diameter are obtained by the theoretical analysis of the sheet disintegration. The mean diameter of droplet is also estimated analytically using the liquid sheet thickness at the edge and the wavelength of the fastest growing wave. The present results indicate that the theoretical results are favorably agreed with the experimental results. The size of droplets decreases after the impingement as the impinging angle or the injection pressure increase. The increment of the injection pressure is more effective than the increment of the impinging angle to reduce the size of droplets.

• 한국환경보건학회지
• /
• 제34권3호
• /
• pp.233-239
• /
• 2008

In order to improve reactor performance of existing sewage treatment plants, the feasibility of enhancing reactor performance by bioaugmentation using EM as bioaugmentation agent and the effects of anoxic: oxic time ratio on reactor performance were investigated. Continuous and intermittent aeration modes were compared under the 6 hr of HRT. Three different types of intermittent aeration modes, that is, 15 min, of anoxic:45 min of oxic, 30 min of anoxic: 30 min of oxic, and 45 min of anoxic: 15 min oxic respectively were chosen as test modes to study the effects of anoxic : oxic time ratios on reactor performance. The optimum anoxic: oxic time ratio was 30 min:30 min when considering simultaneous removal of organic, nitrogen and phosphorus. When applying EM into a continuously aerated reactor under the varying dosing rates of 50-200 ppm, reactor performance in terms of organic and nitrogen removal efficiencies was not improved at all. Nitrogen removal efficiency was increase when the EM dosing rate was increased. However the degree of improvement was slight when the EM was injected above 100 ppm. However optimum phosphorus removal was found at the EM dosing of 200 ppm. Thus it was found that optimum injection concentration of EM is 200 ppm. It is apparent that putting EM into a sewage treatment plant significantly affects the T-N removal efficiency of the reactor by enhancing denitrification efficiency especially in operational conditions of relatively long anoxic periods. To achieve reciprocal condition in a reactor with intermittent aeration it is necessary to enhance the reactor performance by EM injection. In the case of modifying existing continuously aerated reactors into intermittent aerated reactors, it is obvious that operating costs of aeration would be reduced by reducing aeration time when compared with existing conventional sewage treatment plants.

• 한국임상수의학회:학술대회논문집
• /
• 한국임상수의학회 2006년도 춘계학술대회
• /
• pp.136-136
• /
• 2006

• 한국분무공학회지
• /
• 제4권1호
• /
• pp.45-54
• /
• 1999

The spray characteristics of a direct injection multi-hole diesel nozzle having the 2-spring nozzle holder were investigated by using the image processing system and a PDPA(phase Bowler particle analyzer) system. The spray tip penetration, the spray angle, and the droplet diameter and velocity with the variation of the pump speed, injection quantity were measured. From, the experiments, we know that there are small droplets which are not to be detected with spray image around the leading edge of the spray. In order to represent the mean characteristics of the intermittent spray very well, it is very important to set the time windows accurately. From the measurements along the axis of the spray, close to the nozzle, the initially injected droplets are overtaken by droplets that follow them. And also there are the maximum axial mean velocity and SMD at the following part of the leading edge of the spray.

• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.203-210
• /
• 2015

This paper investigates the failure of a car with a 2.5-liter CRDi engine of the Hyundai Company. The failure is caused by intermittent poor acceleration while driving. To analyze the cause, we investigated the air intake volume, the fuel injection, and the air-fuel ratio, which were determined to be normal. The brake switch signal error was discovered while analyzing the function that limits the output of the engine. While investigating the cause, we discovered the corrosion of the pins on the connector of the brake switch. We determined that it was generated by soapy water flowing in the solar film. Therefore, the cause of the failure was the brake switch signal errors. Additionally, we determined that ECM was the normal fail-safe mode that implemented the override device for safety during normal acceleration. Based on these results, further solar film experiments must be conducted to fully elucidate the causes.

• Journal of Korean Dental Science
• /
• 제16권2호
• /
• pp.182-191
• /
• 2023

Purpose: This study investigated the orthodontic tooth movement after weekly parathyroid hormone (PTH) injection in mongrel dogs and analyzes bone formation activity on the tension and pressure sides of the tooth movement in mongrel dogs. Materials and Methods: Three mongrel dogs were used in this study. The first premolar was extracted and orthodontic force using 150 g of closed coil springs between the canine and second premolar was applied. The low-dose PTH group (PTH_1) and high-dose PTH group (PTH_2) received weekly injections of 1.61 ㎍/kg and 3.23 ㎍/kg of PTH, respectively. The control group received weekly injections of 1 ml of saline. Clinical, histomorphometric analysis were carried out. Result: The orthodontic tooth movement was greatest in the PTH_2 group and the lowest in the control group. Fluorescence staining images showed higher bone remodeling on the tension side of the tooth movement in the PTH_1 and PTH_2 groups. PTH_2 group showed a thicker labeling band than the PTH_1 group. PTH_2 group showed the highest mineral apposition rate and bone formation rate, followed by the PTH_1 group and the control group. Conclusion: Weekly intermittent PTH injection, especially in the short-term and at higher doses with orthodontic force, successfully increased orthodontic tooth movement and bone remodeling in mongrel dogs.

• 대한기계학회논문집B
• /
• 제24권2호
• /
• pp.306-315
• /
• 2000

An experimental study was conducted to examine the internal flow patterns inside the mixing chamber of effervescent atomizers. The mixing chamber has the rectangular cross section ($8mm{\times}2mm$) and made of transparent acrylic plate for flow visualization. The parameters tested were the air/liquid ratio (ALR), injection. pressure, and the nozzle orifice diameter. Three different flow regimes were observed; bubbly, annular, and intermittent flows. In the bubbly flow regime, the discharged mixture was disintegrated into drops through the bubble expansion and the ligament breakup. On the other hand, in the annular flow regime, the liquid annulus was disintegrated into small drops by the aerodynamic interaction between the phases due to the high relative velocities between the gas and the liquid. In the intermittent flow regime, the bubble-expansion/ligament-disintegration mode and the annulus-disintegration mode appeared alternatively. The correlations representing the transition criteria between the two-phase flow patterns within the mixing chamber were proposed based on the drift-flux models.