• 제목/요약/키워드: Interior Temperature

검색결과 487건 처리시간 0.026초

외피 유형별 석재 모형돔의 동절기 환경 특성에 관한 연구 (A study on the characteristics of environmental factors of granite dome models with different envelope structures in winter)

  • 공성훈
    • 설비공학논문집
    • /
    • 제11권5호
    • /
    • pp.642-646
    • /
    • 1999
  • Factors governing the rate of heat exchange comprise the air temperature, the speed of air movement, relative humidity, and relation indoors. Recently, there are many researches on the transient analysis of indoor environmental factors such as the dry bulb temperature, relative humidity and air velocity in miniature models. The purpose of this study is to measure the environmental factors and to analyze and evaluate the characteristics of indoor environment with the different envelope structures using a granite dome model. According to the variation of humidity, the state of interior relative humidity for clay model has an equal tendency, although a little range of variation is shown in comparison to the cement model.

  • PDF

Numerical investigation on punching shear of RC slabs exposed to fire

  • Sadaghian, Hamed;Farzam, Masood
    • Computers and Concrete
    • /
    • 제23권3호
    • /
    • pp.217-233
    • /
    • 2019
  • This paper describes the numerical modelling of an interior slab-column connection to investigate the punching shear resistance of reinforced concrete (RC) slabs under fire conditions. Parameters of the study were the fire direction, flexural reinforcement ratio, load levels, shear reinforcement and compressive strength of concrete. Moreover, the efficiency of the insulating material, gypsum, in reducing the heat transferred to the slab was assessed. Validation studies were conducted comparing the simulation results to experiments from the literature and common codes of practice. Temperature dependencies of both concrete and reinforcing steel bars were considered in thermo-mechanical analyses. Results showed that there is a slight difference in temperature endurance of various models with respect to concrete with different compressive strengths. It was also concluded that compared to a slab without gypsum, 10-mm and 20-mm thick gypsum reduce the maximum heat transferred to the slab by 45.8% and 70%, respectively. Finally, it was observed that increasing the flexural reinforcement ratio changes the failure mode from flexural punching to brittle punching in most cases.

온도 및 습도 환경에 의한 공동주택 내 타일하자 발생의 영향 분석 (Analysis of the effect of tile defects in apartment houses by temperature and humidity environment)

  • 김문규;김규용;편수정;최병철;유하민;남정수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2022년도 가을 학술논문 발표대회
    • /
    • pp.69-70
    • /
    • 2022
  • In this study, although the diversity of tiles in the expanding housing market is increasing, cases of defects in building interior tiles that occur due to limitations of existing tile adhesives and construction methods were collected, and among them, the relationship between the coefficient of thermal expansion and the occurrence of defects was analyzed. One-way ANOVA was used for the analysis method, and as a result of the analysis, it was analyzed that the difference between groups in temperature difference and humidity difference by defect type was significant.

  • PDF

영상정보와 환경정보를 이용한 실내 공간 모니터링 시스템 구현 (Implementation of A Monitoring System using Image Data and Environment Data)

  • 차경애;권차욱
    • 한국산업정보학회논문지
    • /
    • 제14권1호
    • /
    • pp.1-8
    • /
    • 2009
  • 본 논문은 일정한 출입자가 상시 존재하는 사무실 등과 같은 실내 공간의 영상정보와 온도, 습도 등의 환경정보를 통해서 해당 공간의 상태를 자동으로 모니터링할 수 있는 시스템을 설계하고 응용프로그램의 구현 및 실험을 목표로 한다. 실제로 모니터링의 목적으로 실내 공간에 CCTV와 같은 무인장비가 구축되어져 영상정보의 자동적 획득은 많이 이루어지고 있다. 이러한 영상정보는 환경정보와의 상관관계를 통해 실내상태를 인식하는 시스템의 구축을 통해서 보다 효율적으로 활용할 수 있다. 즉 일정 시간이상 동적인 상태가 이루어지지 않을 경우 환경 센서 정보(온도, 습도, 조도)를 분석하여 에어콘, 전등 등을 자동으로 on/off 하도록 하는 제어하도록 함으로서 무인제어를 가능하게 한다. 이를 위해서 온 습도센서를 통해서 입력되는 환경정보를 분석하고 동시에 무선 카메라를 통해서 입력되는 영상의 분석을 통해서 해당 상황을 인식하여 사용자가 설정한 환경변수를 자동 제어하는 시스템을 구현하였다. 실험은 연구실에서 실시하였으며, 움직임이 검출되었거나 일정시간 이상 움직임이 검출되지 않았을 때 자동으로 에어컨, 전등 등을 on/off하는지를 확인한 결과 효율적으로 무인제어가 되는 것으로 나타났다.

냉각공기 유속 측정에 기반한 철도차량용 공기압축기 열교환기의 열전달 특성 분석 (Heat Transfer Analysis of a Heat Exchanger for an Air-Compressor of a Railway Vehicle Based on Cooling Air Flow Measurement)

  • 안준;김무선;장성일
    • 설비공학논문집
    • /
    • 제29권9호
    • /
    • pp.447-454
    • /
    • 2017
  • In this study, local velocity distribution of cooling air in a heat exchanger used in an air compressor for a railway car was measured and heat transfer characteristics of the heat exchanger were analyzed. First, heat transfer coefficient and fin performance of the cooling air side were predicted and was checked if the fin of the heat exchanger was effectively used. Distribution of air flow rate at high temperature side was predicted through pipe network analysis and heat resistance at high temperature and low temperature side were predicted and compared. Spatial distribution of temperature in the interior and surface of the square channel constituting high-temperature side was predicted and appropriateness of the size of the heat exchanger was examined. As a result of the analysis, the present size of the heat exchanger could be reduced and it could be effective to promote heat transfer inside the heat exchanger rather than outside to improve performance of the heat exchanger.

해양 표층 수온 역전의 원인 (ON THE GENERATION OF TEMPERATURE INVERSIONS IN THE UPPER LAYER OF THE OCEAN)

  • 강용균
    • 한국해양학회지
    • /
    • 제18권1호
    • /
    • pp.43-48
    • /
    • 1983
  • 동계 동해와 황해 표층 수십 메터에서 불안정 성층을 수반한 해양 온도 역전 현상이 종종 발생한다. 수온 역전층 발생의 원인으로서는 (1) 해면으로부터의 열손실을 보상하기 위한 해양 내부의 대류에 기인한 수온 역전, (2) 계절적 수온 변화가 하방으로 전달되면서 진폭과 위상이 바뀜에 따른 동계의 수온 역전, 그리고 (3) 냉수역에서 온수역으로 취송류가 이동함에 따른 수온 역전 등을 들 수 있는 바, 이 논문에서는 위의 세가지 수온 역전 발생 원인에 대하여 해석적인 모델을 제시한다.

  • PDF

비정상 자연대류에 의한 온도성층화의 동특성에 관한 연구 (Dynamic Characteristics of Thermal Stratification Build-up by Unsteady Natural Convection)

  • 강보선;이준식;이택식;노승탁
    • 대한설비공학회지:설비저널
    • /
    • 제17권4호
    • /
    • pp.382-394
    • /
    • 1988
  • Dynamic characteristics of thermally-forced stratification process in a square enclosure with a linear temperature profile at the side walls have been investigated through flow visualization experiment and numerical analysis. The experiment was performed on air with the Rayleigh numbers of order $10^5$. A particle tracer method is used for the flow visualization and to obtain a sudden linear temperature profile at the side walls copper blocks which already have a linear temperature profile are come into contact with the thin copper plates of the test section. Immediately a meridional circulation is developed and heat transfer takes place from the wall to the interior region by circulation of fluid and finally a thermal stratification is achieved. In the numerical study, QUICK scheme for convective terms, SIMPLE algorithm for pressure correction, and the implicit method for the time marching are adopted for the integration of conservation equations. Comparison of flow visualization and numerical results shows that the developing flow patterns are very similar in dynamic nature even though there is a time lag due to the inevitable time delay in setting up a linear temperature profile. For high Rayleigh numbers, the oscillatory motion is likely to take place and stratified region is extended. However, initial temperature adjustment process is much slower than that for low Rayleigh numbers.

  • PDF

유한요소법에 의한 고체내부의 사각열원 주위 열전도 특성연구 (A Study on Heat Transfer Analysis around the Square Heat Source of Interior Solid by Using Finite Element Method)

  • 장재은;홍봉기
    • 수산해양기술연구
    • /
    • 제18권2호
    • /
    • pp.101-108
    • /
    • 1982
  • 유한요소법에 의한 고체내부 사각열원 주위 열전도특성은 실험에서 구한 결과와 거의 일치하였으며 열전도특성을 요약하면 다음과 같다. 1. 사각열원의 중심거리 이동에 따른 열전도에 미치는 중심방향의 영향은 열원 사이의 거리가 가까울수록 낮은 온도분포를 보이며 x=16cm 일 때 model 4에서 $\theta$=0.698 model 3에서는 $\theta$=0.401이다. 그리고 내부로 감에 따라 그 차는 감소한다. x=40cm에서 model 4은 $\theta$=0.907이고 model 6은 $\theta$=0.895이다. 2. 높이방향의 영향은 공기와 접하므로 대류현상이 일어나므로 열원의 크기를 벗어나는 구역은 model 1~3에서는 y=8~12cm model 4~6에서는 y=4~8cm이다. 그리고 두 곳의 온도의 차는 $\theta$≒0.009이다. 3. 열전도도의 변화에 따른 열전도의 영향은 그 값이 클수록 강하게 나타나며 model 2에 대해서 높이 방향의 전 경계에 대한 무차원온도의 변동은 k=7 일 때 $\theta$=0.079~0.054 k=0.3일 때 $\theta$=0.0036~0.0025의 값을 나타낸다

  • PDF

철도차량 화재모델링에서의 재료별 연소특성 시험법 조사 (Test Methods for FDS modeling for passenger trains)

  • 이덕희;이철규;정우성
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 추계학술대회 논문집
    • /
    • pp.982-988
    • /
    • 2007
  • The input data for the interior material of the train is one of the key points for enhancing the accuracy of fire simulation. In this study, we investigated the Fire Test Methods for the Fire Dynamic Simulator modeling for railroad passenger trains. We should get the thermal inputs such as ignition temperature, conductivity, specific heat, vaporization heat, effective heat release. With the simple conduction model for cone-calorimeter test, they could get more than HRR. Kinds of methodology were introduced for better thermal data for real material.

  • PDF

비정상 자연대류의 수치 계산 (Numerical Simulations of Unsteady Natural Convection)

  • 곽호상;현재민
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 1997년도 추계 학술대회논문집
    • /
    • pp.10-15
    • /
    • 1997
  • Unsteady natural convection of an enclosed fluid has been one of the fundamental thermo-fluid problems, of which dynamic relevance is found in many engineering applications. Together with the inherent coupling between the boundary layers and the interior core, and strong interaction between flow and temperature fields, the unsteadiness poses serious hurdles for analytical and experimental approaches. With the recent development of computers and solution algorithms, computational fluid dynamics has become the prevailing tool to tackle the underlying problems. In this presentation, a few examples of numerical studies are introduced. The usefulness and potential of numerical simulations in investigating unsteady natural convection are elaborated.

  • PDF