• Journal of the Korean Wood Science and Technology
• /
• 제45권4호
• /
• pp.419-431
• /
• 2017

The forest slopes cause substantial local changes in soil properties and an increase in soil erosion after extreme rainstorms. The high soil erosion rates on forest slopes need the effective use of growing media to control the soil runoff. Therefore, we prepared six different lignocellulosic growing media such as peat, perlite, and wood meal as the base materials and carboxymethyl cellulose (CMC), glucomannan, starch, old corrugated containerboard, and computer printout as the additional materials for the prevention of simulated rainfall-induced runoff. The growing media containing old corrugated containerboard efficiently reduced the percentage of soil runoff; however, it could not completely cushion the influence of crust. The best results for plant growth, except in the leaf area, were also obtained with the growing media containing old corrugated containerboard, suggesting an interesting way of paper recycling and an economic benefit for plant or crop growth in forest slope.

• Animal cells and systems
• /
• 제7권3호
• /
• pp.197-205
• /
• 2003

White snakeroot (Ageratina altissima (L.) R. King & H. Robinson) as an invasive alien plant appeared more abundantly at lower elevations where frequent artificial interferences prevailed than at higher elevations where such impacts were less. They appeared abundantly in introduced forests such as black locust plantation but they did not appear or were rare in natural forests such as oak forest. But an exceptional phenomenon where white snakeroot did not appear was found in a Korean pine stand with dense cover afforested recently. Appearance status of white snakeroot in each section of trampling path depended on breadth of the path and relative light intensity. Growth of white snakeroot measured as the number of ramet per genet, height, and biomass was better near the trampling path and was reduced toward the forest interior. The growth was proportionate to the relative light intensity measured according to distance from the trampling path. Such results support the fact generally known in relation invasion and expansion of the invasive alien plants. From this viewpoint, we suggest a management plan that applies ecological restoration principles to address ecosystems infected with white snakeroot by restoring the integral feature of the degraded nature and more thoroughly conserving the remaining nature.

• 방사성폐기물학회지
• /
• 제19권1호
• /
• pp.51-58
• /
• 2021

Chemical decontamination of primary systems in a nuclear power plant (NPP) prior to commencing the main decommissioning activities is required to reduce radiation exposure during its process. The entire process is repeated until the desired decontamination factor is obtained. To achieve improved decontamination factors over a shorter time with fewer cycles, the appropriate flow characteristics are required. In addition, to prepare an operating procedure that is adaptable to various conditions and situations, the transient analysis results would be required for operator action and system impact assessment. In this study, the flow characteristics in the steady-state and transient conditions for the chemical decontamination operations of the Kori-1 NPP were analyzed and compared via the MARS-KS code simulation. Loss of residual heat removal (RHR) and steam generator tube rupture (SGTR) simulations were conducted for the postulated abnormal events. Loss of RHR results showed the reactor coolant system (RCS) temperature increase, which can damage the reactor coolant pump (RCP)s by its cavitation. The SGTR results indicated a void formation in the RCS interior by the decrease in pressurizer (PZR) pressure, which can cause surface exposure and tripping of the RCPs unless proper actions are taken before the required pressure limit is achieved.

• 대한인간공학회지
• /
• 제27권2호
• /
• pp.73-82
• /
• 2008

Currently an office in information society is advanced to a digitalized VDT office. The VDT office has a natural luminous system prioritizing visual perception and so importance of lighting design by artificial lighting is emphasized in the VDT office. The purpose of the study is to analyze Illumination and Luminance for lighting design by the standard of ergonomics in the VDT office. The study analyzed Illumination and Luminance in the main control room of an nuclear power plant needing a design of ergonomics ACR(Advanced Control Room) type Ling Ao phase II NPP MCR in Guangdong, China. The study examined the relativity of ACR characteristics to its operator's duties and set up an outline of lighting design, the standard of ergonomics and input data for the analysis. Thus, the study examined appropriateness with the standard of ergonomics setting up the analyzed Illumination and Luminance and drew a conclusion.

• 한국실내디자인학회논문집
• /
• 제23권4호
• /
• pp.12-22
• /
• 2014

In this study, the basic information and study design characteristics of the Building Outer Wall Vertical Greening were analyzed. Recorded according to the type of research and analysis, through numerical statistics. Building Outer Wall Vertical Greening design the most appropriate and effective ways to present and try to guidelines. The scope of the research of Building Outer Wall Vertical Greening(2001-2013) was selected the most representative examples. Theory and statistical data analysis and case study research was conducted. The main academic monographs, Library Literature, specializing in design magazines and excerpts from the 28 cases analyzed specifically. Building Outer Wall Vertical Greening should be designed synthetically geographical features of the project, existing material, to consider the value of the building. Architect must be designed depending on accident and comprehensive expertise for architectural design of Building Outer Wall Vertical Greening. Building Outer Wall Vertical Greening requires the professional and comprehensive design approach depending on support of the government and people. However, purpose of use, plant, color, Formative expression, culture, locality, maintenance is properly applied in the design process is not easy.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.859-865
• /
• 2014

Optimization of an electric machine is mainly a nonlinear multi-modal problem. For the optimization of the multi-modal problem, many function calls are required with much consumption of time. To address this problem, this paper proposes a novel hybrid algorithm in which function calls are less than conventional methods. Specifically, the proposed method uses the kriging metamodel and the fill-blank technique to find an approximated solution in a whole problem region. To increase the convergence speed in local peaks, a parallel gradient assisted simplex method is proposed and combined with the kriging meta-model. The correctness and usefulness of the proposed hybrid algorithm is verified through a mathematical test function and applied into the practical optimization as the cogging torque minimization for an interior permanent magnet synchronous machine.

• 한국자원식물학회지
• /
• 제28권5호
• /
• pp.665-674
• /
• 2015

본 연구의 최종 목표는 실내의 공간과 식물바이오필터의 규모에 따라 실내공기 오염물질을 정화할 수 있는 식물 녹화와 자동관수 그리고 생물학적 여과 기능을 통합한 식물바이오필터 시스템의 개발이다. 본 실험에 사용된 식물 바이오 필터는 실내공간을 효율적으로 사용하기 위해 물펌프, 물탱크, 송풍기, 가습장치, 그리고 다층 구조의 식물 식재 공간을 일체형으로 설계하였다. 본 연구는 인공적인 실내 공기 오염원을 발생시키지 않은 상태에서 바이오필터 부근의 공간과 바이오필터와 멀리 떨어진 공간(무처리구)의 실내 공기질을 비교하고, 바이오필터 내다층 구조의 식재층에 따른 식물의 생육을 평가하고자 수행하였다. 바이오필터 처리 공간 내 휘발성 유기 화합물(TVOCs), 일산화탄소, 이산화탄소와 같은 실내 공기 오염물질의 농도는 무처리구에 비해 낮게 나타났다. 또한 바이오필터 내 식재된 층에 관계없이 Dracaena sanderiana ‘Vitoria’와 Epipremnum aureum ‘N Joy’는 정상적으로 생육하였다. 따라서 실내식물을 식재할 수 있는 본 벽면형 식물바이오필터는 실내 공기 정화에도 효과가 있는 것으로 확인하였다.

• 한국환경복원기술학회지
• /
• 제6권1호
• /
• pp.41-50
• /
• 2003

The feasibility as floricultural crops and water garden plant materials of Korean native water plants was investigated. Propagation type, growing and flowering time were observed for development as water garden, interior aquarium plant and water purification materials. Flowering time of the water plant was 7 species in May, 28 species in June, 49 species in July, 55 species in August, 47 species in September, and 17 species in October. Beautiful flowering water plants were Nymphaeaceae, Nymphoides peltata, Nymphoides indica, Monochoria korsakowii, Iris pseudacorus, Iris laevigata, and etc. Ornamental leafy water plants were Ceratopteris thalictroides, Ludwigia ovalis, Myriophyllum verticillatim, Limnophila sessiliflora, Blyxa aubertii, Blyxa echinosperma, Vallisneria asiatica, Hydrilla verticillata and Eleocharis acicularis etc. Isoetes japonica, Isoetes coreana and Isoetes sinensis were propagated by spore. Blyxa aubertii, Blyxa echinosperma, Myriophyllum verticillatim, Nuphar japonicum, Nelumbo nucifera, Ottelia alismoides, Sagittaria aginashi, Trapa japonica, and Trapa natans were propagated by seed. Persicaria amphibia, Ceratophyllum demersum (hornwort), Myriophyllum verticillatim, Myriophyllum spicatum, Oenanthe javanica, Potamogeton crispus, Hydrilla verticillata and Acorus calamus were propagated by division. And Vallisneria asiatica, Hydrilla verticillata and Phragmites japonica were propagated by runner. Ceratophyllum demersum (hornwort), Myriophyllum verticillatim, Myriophyllum spicatum, Limnophila sessilifera were propagated by adventitious bud. Ceratopteris thalictroides was propagated by leaf cutting. The 35 genera, 68 species of water plants were available for horticultural use. The 45 species such as Iris laevigata, Eleocharis acicularis, Menyanthes trifoliata, Nymphaea minima, Nuphar pumilum, Nymphoides coreana, Nymphoides peltata, Nymphoides indica, Nymphaea tetragona (water lily), and Typha latifolia could be use for water garden plant. The 21 species such as Limnophila sessilifera, Vallisneria asiatica, Ceratophyllum demersum and Hydrilla verticillata available for indoor aquarium. The 19 species such as Ottelia alismoides, Oenanthe javanica, Limnophila sessilifera and Blyxa echinosperma could be culture in container. The 27 species such as Trapa japonica, Trapa incisa, Phramites commuris (reed), Phragmites japonica, and Zizania latifolia were usable for water purification plant materials.

• 한국환경과학회지
• /
• 제22권11호
• /
• pp.1499-1508
• /
• 2013

In the results of investigating the role of LED light quality in enhancing the ornamental value of indoor foliage plants, amber and red light increased plant height, leaf width, and leaf stalk, and the consequent tree shape decreased the ornamental value. The chlorophyll content increased significantly under white light and compound light. With regard to the effect of plant leaf color on ornamental value, the value of lightness was markedly enhanced by red light. As to the functionality of plants according to photosynthetic activity, plants such as Dieffenbachia, Clusia, and Dracaena were found favorable to those staying indoors for a longtime from morning to evening. Spathiphyllum, and Ficus were found to be recommendable for indoor spaces used actively during afternoon because their photosynthesis was activated in the afternoon. With regard to power consumption according to light quality, white light consumed 119 W/hour, around 45% lower than that of fluorescent lamps, so it is considered the optimal artificial light quality that can enhance energy efficiency. Red light consumed 72 W/hour, only 33% of that of fluorescent lamps, but it was not considered the optimal light quality because plant growth was poor under the light quality. White light and compound light were found to be the ideal light sources for improving the functionality and ornamental value of indoor plants and reducing the cost of maintenance, but because compound light hinders people from recognizing the original color of plants and makes their eyes easily tired, white light was considered the optimal light satisfying all of the ornamental value, economic efficiency and functionality resulting from plant growth.

• KIEAE Journal
• /
• 제15권5호
• /
• pp.107-112
• /
• 2015

Purpose: This study desires to investigate an effect of indoor temperature, humidity, and illuminance targeting a planting system of double-skin facade and cavity space adjacent to the outside within a certain period of winter. Through this, the study suggests a basic material about an energy conservation effect of double window system using planting to reduce heating load of a building in winter, so desires to contribute to indoor thermal comfort effect and illuminance correction study of double window and indoor plant. Method: Considering effects such as day and night climatic elements and air conditions in winter, illuminance measurement was conducted through a double-skin facade of space, a subject of the measurement, on the basis of practical residence time of a resident, and this study analyzed characteristics of indoor illuminance about this. The study measured and compared a change of insolation, dry-bulb temperature, and relative humidity at each indoor-outdoor measuring point, so measured and compared characteristics of an indoor temperature effect by elements of double-skin facade and indoor plant. Result: Through this study, the researcher could determine that indoor plant within double window in winter not only blocks solar radiation but also photosynthesizes, so is somewhat disadvantageous to winter thermal comfort reducing heating load. In addition, solar radiation going through interior plays a role to bring down somewhat high humidity to about 50% of reasonable humidity, so plays a direct role of maintenance of comfortable indoor space. Although there are effects such as blocking of solar radiation and temperature reduction, this has a positive influence on humidity control and proper illuminance distribution. The researcher could determine that illuminance, temperature, and humidity by solar radiation penetration for the whole measuring time play a role to supplement indoor environment mutually.