• 제목/요약/키워드: Interior Plant

검색결과 155건 처리시간 0.022초

실내소음 저감을 위한 능동패널의 체속도 제어 (Volume Velocity Control of Active Panel to Reduce Interior Noise)

  • 김인수
    • 소음진동
    • /
    • 제9권1호
    • /
    • pp.33-41
    • /
    • 1999
  • This paper presents a method of actively controlling the interior noise by a trim panel with hybrid feedforward-feedback control loop. The control technique is designed to minimize the vibration of panel whose motion is limited to that of a piston (out-of-plane motion). The hybrid controller consists of an adaptive feedforward controller in conjunction with a linear quadratic Gaussian (LQG) feedback controller. In order to maintain control performance of both persistent and transient disturbances, the feedback loop speeds up the adaptation rate of feedforward controller by improving damping capacity of secondary plant related with the adaptation rule. Numerical simulation and experimental result indicate that the hybrid controller is a more effective method for reducing the vibration of the panel (and therefore the interior noise) compared to using feedforward controller.

  • PDF

차량 실내소음 저감 및 음질향상을 위한 POWER PLANT 진동 개선에 관한 연구 (A Study on Improvement of the Power Plant Vibration for the Noise Reduction and the Sound Quality Improvement in the Compartment.)

  • 이상권;최병욱;여승동
    • 한국자동차공학회논문집
    • /
    • 제1권2호
    • /
    • pp.77-88
    • /
    • 1993
  • This paper shows the methods about an improvement of the sound quality, which is improvement for automobil market recently. Especially, the rumble noise in the passenger compartment makes driver uncomfortable. For an improvement of the rumble noise, in this paper, the increase of the number of balance weight of the crank shaft(from 4 to 8), the vibration constrainer of cylinder block and the flexible flywheel were applied to power plant. Among those kinds of applications, the application of the flexible flywheel to power plant makes not only the vibration of the engine mount boss reduce most effectly but also the interior noise. It also improves the sound quality and the rumble noise disappears in the passenger compartment.

  • PDF

근대기 실내장식요소로서 벽지에 대한 인식과 디자인 전개에 관한 동서양 비교 연구 - 1900년대 전후 영국과 한국의 벽지사례를 중심으로 - (A Study on the Wallpaper Design as the Interior Decorating Elements in Modern Period - Focused on England and Korea Wallpaper in the 1900s -)

  • 이지영
    • 한국실내디자인학회논문집
    • /
    • 제26권5호
    • /
    • pp.106-116
    • /
    • 2017
  • In the 1900s, the cultural crossing of East and West was realized through the acceptance and reproduction of culture. Cultural change in the Orient was the result of attempts to harmonize the West's images, which they chose in their respective countries, with their own culture. However, research on design history until now has been centered on the West, and East was regarded as a beneficiary of civilization inherited from Western's. From the point of view of Western design history as a main trend, the unique characteristics of Korean design culture are not revealed. Therefore, through this studies, we want to distinguish Korea's modern design, which has been recognized as a minority. For the study, through the wallpaper, which is one of the detailed components of the interior space in modern times, we try to analyze the socio - cultural historical factors and design characteristics influencing the formation of the interior space in modern times. Summarizing a result of research. The early modern wallpaper of England mainly uses plants as motifs. But In Korea, animal patterns and letter patterns were used. The reason why European wallpaper was mainly a plant at the time was that the structure of the motif was useful for the process of creation. However, in the case of the Korean wallpaper pattern, the theme was selected according to the meaning of the motif, and it was abstracted appropriately for the 2D design. As a result, many geometric shapes were formed. In addition, European wallpaper pattern is more complex and organic than Korean wallpaper pattern. Therefore, the boundary of the central pattern as the basic unit is unclear and the patterns are connected. The pattern development method is not a simple repetition but a combination of symmetry and repetition. In Korea, on the other hand, the boundaries of unit patterns are clear and patterns are developed by simple repetition. There are many diamond-type repeating patterns in particular.

Physcial and Fiber Properties of TMP and CTMP from Kenaf Cultivated at Reclaimed Land of Korea

  • Yoon, Seung-Lak;Kojima, Yasuo;Cho, Dong-Ha;Kim, Nam-Hum;Kim, Min-Joong;Lee, Myoung-Ku
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
    • /
    • pp.373-379
    • /
    • 2006
  • Fiber characteristics and fiber distribution of thermomechanical pulp(TMP), bisulfite chemithermomechanical pulp(bisulfite CTMP), neutral sulfite chemithermomechanical pulp(neutral sulfite CTMP) from kenaf(Hibiscus cannabinus L., Malvaceae) cultivar Tainug-2 cultivated in the reclaimed land of Korea were examined to use effectively nonwood fibers as an alternative raw material sources for papermaking. Yields of TMP and CTMP from kenaf were lower than those of TMP from hardwoods and CTMP from softwoods and hardwoods. Bark fibers of kenaf cultivar Tainung-2 ranged 2.04 to 2.30 mm long and $18.7{\sim}19.7{\mu}m$ width. Core fibers averaged 0.63 to 0.80 mm long and $29.5{\sim}31.4{\mu}m$ wide. Coarseness of bark fiber was higher than that of core fiber, and fiber from TMP were higher than those from both bisulfite CTMP and neutral sulfite CTMP. Curl indexes of bark fibers were higher than those of core fibers. However curl indexes were not significantly affected by the pulping conditions. Short fiber distributions were higher in core fibers from TMP and CTMP and long fiber distributions were higher in bark fibers. There was no significant difference in fiber distribution of whole and core fibers obtained from TMP and CTMP, Fibers from neutral sulfite CTMP, however, exhibited a little higher long fiber distribution. Distinct difference in anatomical characteristics was found between core and bast fibers of kenaf plant. Parenchyma cell, pith parenchyma cell and vessel were observed in core fibers and bast fiber in bast sections.

  • PDF

The Adaptation of Ginseng Production of Semi-arid Environments The Example of British Columbia, Canada

  • Bailey, W.G.
    • 고려인삼학회:학술대회논문집
    • /
    • 고려인삼학회 1990년도 Proceedings of International Symposium on Korean Ginseng, 1990, Seoul, Korea
    • /
    • pp.155-167
    • /
    • 1990
  • Ginseng Is renowned for both its medicinal and herbal uses and successful cultivation of Panax ginseng in Asia and Panax quinquefolium in North America has until recently taken place in the native geographical ranges of the plants. As a consequence of the potential high capital return and anticipated increases in consumer consumption, commercial cultivation of American ginseng now occurs well outside the native range of the plant in North America. In fact, the region of greatest expansion of cultivation is in the semi-arid interior region of British Columbia, Canada. Linked with this expansion is the potential domination of the ginseng industry by agricultural corporations. In the interior of British Columbia, the native deciduous forest environment of eastern North America is simulated with elevated polypropylene shade and a surface covering of straw mulch. The architecture of these environments is designed to permit maximum machinery usage and to minimize labor requirements. Further, with only a four- years growth cycle, plant densities in the gardens are high. In this hot, semi-arid environment, producers believe they have a competitive advantage over other regions in North America because of the low precipitation rates. This helps to minimize atmospheric humidity such that the conditions for fungal disease development are reduced. If soil moisture level become limited, supplemental water can be provided by irrigation. The nature of the radiation and energy balance regimes of the shade and many environments promotes high soil moisture levels. Also, the modified environment redlines soil heating. This can result in an aerial environment for the plant that is stressful and a rooting zone environment that is suloptimal. The challenge of further refining the man modified environment for enhanced plant growth and health still remains. Keywords Panax ginseng, Panax quinquefolium, cultivation, ginseng production.

  • PDF

강우량이 극히 적은 여건에서의 인삼재배의 순응 : 캐나다 브리티쉬 콜롬비아의 실례 (The Adaptation of Ginseng Production of Semi-arid Environments : The Example of British Columbia, Canada)

  • Bailey, W.G.
    • Journal of Ginseng Research
    • /
    • 제14권2호
    • /
    • pp.297-309
    • /
    • 1990
  • Ginseng is renowned for both its medicinal and herbal uses and successful cultivation of Panax ginseng in Asia and Panax Vtiinvtiefolilim in North America has until recently taken place in the native geographical ranges of the plants. As a consequence of the potential high capital return and anticipated increases in consumer consumption, commercial cultivation of American ginseng now occurs well outside the native range of the plant in North America. In fact, the region of greatest expansion of cultivation is in the semi-arid interior region of British Columbia, Canada. Linked with this expansion is the potential domination of the ginseng industry by agricultural corporations. In the interior of British Columbia, the native decidous forest environment of eastern North America is simulated with elevated polypropylene shade and a sllrface covering of straw mulch. The architecture of these environments is designed to permit maximillm machinery useage and to minimize labour requirements. Further, with only a four-year growth cycle, plant densities in the gardens are high. In this hot, semiarid environment, producers believe they have a competitive advantage over other regions in North America because of the low precipitation rates. This helps to minimize atmospheric humidity such that the conditions for fungal disease development are reduced. If soil moisture levels become limited, supplemental water can be provided by irrigation. The nature of the radiation and energy balance regimes of the shade and much environment promotes high soil moistilre levels. Also, the modified environment reduces soil heating. This can result in an aerial environment for the plant that is stressful and a rooting zone environment that is sub-optimal. The challenge of further refining the man modified environment for enhanced plant growth and health still remains.

  • PDF

Movement of Rhizobia Inside Tobacco and Lifestyle Alternation from Endophytes to Free-Living Rhizobia on Leaves

  • Ji, Kui-Xian;Chi, Feng;Yang, Ming-Feng;Shen, Shi-Hua;Jing, Yu-Xiang;Dazzo, Frank B.;Cheng, Hai-Ping
    • Journal of Microbiology and Biotechnology
    • /
    • 제20권2호
    • /
    • pp.238-244
    • /
    • 2010
  • Rhizobia are well-known for their ability to infect and nodulate legume roots, forming a nitrogen-fixing symbiosis of agricultural importance. In addition, recent studies have shown that rhizobia can colonize roots and aerial plant tissues of rice as a model plant of the Graminaceae family. Here we show that rhizobia can invade tobacco, a model plant belonging to the Solanaceae family. Inoculation of seedling. roots with five GFP-tagged rhizobial species followed by microscopy and viable plating analyses indicated their colonization of the surface and interior of the whole vegetative plant. Blockage of ascending epiphytic migration by coating the hypocotyls with Vaseline showed that the endophytic rhizobia can exit the leaf interior through stomata and colonize the external phyllosphere habitat. These studies indicate rhizobia can colonize both below- and above-ground tissues of tobacco using a dynamic invasion process that involves both epiphytic and endophytic lifestyles.

행인과 도인의 감별기준감별기준 (Identification of Armeniacae Semen and Persicae Semen)

  • 이승호;김영식;김정훈;이금산;최고야;주영승
    • 대한본초학회지
    • /
    • 제29권4호
    • /
    • pp.61-67
    • /
    • 2014
  • Objectives : To present a differential standard of Armeniacae Semen and Persicae Semen that are easily confused. Methods : It was planed a differential standard form through outer appearance of the original plant, outer appearance in the form of each medicines and the appearance of the interior form through a microscope for each samples. Using an standard compound amygdalin, each samples have been analyzed by HPLC and TLC. Results : It was possible to distinguish the orignal plant between Armeniacae Semen and Persicae Semen through its leaf shape and calyx type. In Outer appearance in the form of each medicines, there was no difference pre-existing method(measuring length and width). In vascular pattern of the surface, however, there was a clear difference that Armeniacae Semen was developed more reticulated branches than Persicae Semen. In appearance through a microscope, it has not been possible to find a clear difference in the per original plant. However, there was a clear difference between Armeniacae Semen(1 layer) and Persicae Semen(3 layer) in inner albubemen cell. In TLC analysis, there was no difference in the pattern between samples. But in HPLC analysis, Armeniacae Semen showed amygdalin content higher on average. Conclusions : It will be possible to find various differences in the outer appearance of the original plant, the outer appearance in the form of each medicines, the appearance of the interior form through a microscope and physical and chemical research component.