• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.152-157
• /
• 1994

A fiber-optic interferometric sensor array capable of passive remote sensing is demonstrated with two sensors at the array head. The signal from a specific sensor could be separated in time domain. The measured sensitivity at signal frequencies of a few kHz and cross talk level between two sensors were about $40{\mu}rad\sqrt{Hz}$and below - 50 dB, respectively.tively.

• Korean Journal of Optics and Photonics
• /
• v.1 no.2
• /
• pp.125-129
• /
• 1990

One method for time-division multiplexing (TDM) of Michelson type fiber-optic interferometric sensor arrays is proposed and demonstrated experimentally. This method has some advantages; fewer fiber-optic components. low cost. and high reliability.bility.

• Current Optics and Photonics
• /
• v.8 no.4
• /
• pp.391-398
• /
• 2024

An image reconstruction algorithm is vital for the image quality of a photonic integrated interferometric imaging (PIII) system. However, image reconstruction algorithms have limitations that always lead to degraded image reconstruction. In this paper, a novel image reconstruction algorithm based on deep learning is proposed. Firstly, the principle of optical signal transmission through the PIII system is investigated. A dataset suitable for image reconstruction of the PIII system is constructed. Key aspects such as model and loss functions are compared and constructed to solve the problem of image blurring and noise influence. By comparing it with other algorithms, the proposed algorithm is verified to have good reconstruction results not only qualitatively but also quantitatively.

• Korean Journal of Optics and Photonics
• /
• v.3 no.2
• /
• pp.101-104
• /
• 1992

One of coefficients showing the degree of thermal effects is the thermooptic coefficient. It is the ratio of the refractive index change versus the change of temperture and was already measured by other general interferometric method. In this research, an optical system with the electronic speckle pattern interferometer complementing faults of the general interferometer was developed and its potentiality was validated experimentally.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.474-480
• /
• 2002

Aspheric optical lenses and mirrors are widely used in recent. It is more difficult to manufacture and measure the aspherical optics compared to conventional spherical ones. The interferometric optical test is common for the measurement of spherical optical surface. But the application of the interferometry to the measurement of aspheric surface is difficult because it needs a precise null corrector and very careful environmental conditions such as keeping constant temperature, humidity, atmospheric pressure and vibrations. To enhance productivity of optics manufacturing on-machine measurement and correction has been developed in this study. For practical applications, robustness of the measurement method to environments is more important. For the purpose an optical OMM(On-Machine Measurement) system has been developed using Shack-Hartmann test which has robustness to the environment. The wavefront has been reconstructed from the measured data using the primary aberration polynomial function by least square fitting. The measured result of the developed only system gives the maximum deviation only in 200 nm from the result measured by a commercial Fizeau interferometer Wyko 6000.

• Current Optics and Photonics
• /
• v.7 no.2
• /
• pp.166-175
• /
• 2023

We theoretically analyze and experimentally demonstrate a polarization-diversified four-channel optical demultiplexer (DeMUX) comprising a hybrid mode conversion-type polarization splitter rotator (PSR) and delayed Mach-Zehnder interferometer optical DeMUX for use in coarse wavelength division multiplexing (CWDM)-based optical interconnect applications. The Si wire-based device fabricated by a complementary metal-oxide semiconductor-compatible process exhibited nearly the same filter spectral response irrespective of the input polarization state under the PSR. The device had an extremely low insertion loss of <1.0 dB, polarization-dependent loss of <1.0 dB, and interchannel imbalance of <0.5 dB, suppressing unwanted wavelength and polarization crosstalk from neighboring channels of <-20 dB at each peak transmission channel grid.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.454-459
• /
• 2003

We report the first demonstration of 10 Gb/s wavelength conversion in a Mach-Zehnder interferometric wavelength converter monolithically integrated with a loss-coupled DFB probe source. The integrated device is fabricated using a BRS (buried ridge stripe) structure with an undoped InP clad layer on the top of a passive waveguide to reduce high propagation loss. The device exhibited a static extinction ratio of 11 dB. Good performance at 10 Gb/s is obtained with an extinction ratio of 7 dB and a power penalty of 2.8 dB at a 10$^{-9}$ bit error rate.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.40-45
• /
• 2004

Recently, aspheric optical lenses and mirrors, which are harder to manufacture and measure than the conventional spherical ones, are widely used, particularly in electronic fabrication process. Generally, interferometric optical method is used for the measurement of spherical optical surface. However, the interferometric method for aspheric surface measurement is difficult because it needs a precise null corrector and strict environmental conditions such as constant temperature, humidity and vibrations. We have been studied on the manufacturing of aspheric optics to improve the surface profile accuracy and productivity using a corrective polishing process. For the corrective polishing, a practical method of On-Machine Measurement (OMM) is required. For this purpose, an optical OMM system has been studied using the Shach-Hartmann test, which is very robust to the practical polishing environment. The wavefront has been reconstructed from the measured data using the primary aberration polynomial function by the least squares fitting. The measured result of the OMM system shows that the maximum deviation is less than 200 nm for the one of commercial Fizeau interferometer Wyko 6000.

• Korean Journal of Optics and Photonics
• /
• v.7 no.2
• /
• pp.162-166
• /
• 1996

We report a fiber optic interferometric electric field sensor that utilizes electrostrictive ceramics-1%, 2%, 3%, La-doped 0.9MN/0.1PT, respectively-as the transducing elements. It is also experimentally observed that 3% La-doped PMN/PT among the three elements has the largest electrostrictive coefficient $M=3.87{\times}10^ {-16}(m/V)^2$ at 3.38 kHz and displays small hysteresis. The optical fiber sensor with the 3% La-doped PMN/PT exhibits minimum detectable field of 2.08(V/m)/ $\sqrt{Hz}$ and has a good linearity over the dynamic range 40 dB.

• Korean Journal of Optics and Photonics
• /
• v.13 no.6
• /
• pp.530-536
• /
• 2002

The accurate measurements of thermal expansion coefficients is one of the most important techniques required not only in material science but also in industries. A high precision interferometric dilatometer, using acoustic optical modulator, has been constructed and its performance has been tested. The system consists of a double-path optical heterodyne interferometer and a radiant heating furnace. This provides highly accurate length measurement, and allows rapid heating and cooling method for the specimen. A three longitudinal mode frequency stabilized He-Ne laser, using the secondary beat frequency, is constructed. Its stability is found to be $5{\times}10^{-9}$. The uncertainty in the length measurement is estimated to be of nanometer order in the range between room temperature to 1100 K.