• 제목/요약/키워드: Interference alignment

검색결과 75건 처리시간 0.021초

고감도 레이저 간섭계를 이용한 미소 진동 진폭의 정밀측정 (Ultrasensitive laser interferometer for precision measurement of small vibration displacement)

  • 서상준
    • 대한기계학회논문집
    • /
    • 제12권3호
    • /
    • pp.440-449
    • /
    • 1988
  • 본 연구에서는 미소한 진동진폭의 정밀한 측정을 위해 비교적 광선정렬(opti- cal alignment)이 쉽고 광손실이 적으며 국소부위의 진동측정이 가능한 다중반사계를 Michelson간섭계에 도입하였다.미소 진동진폭의 정밀한 값을 결정하기 위해서는 간 섭신호를 측정하여 간섭무늬 보간법과 곡선 맞춤법을 이용하는 방법이 있다. 전자는 간단한 계산과 시간을 절약할 수 있는 반면 후자는 복잡한 계산으로 인해 많은 시간이 소요된다. 그러나 정밀계측장비의 교정에서와 같이 경우에 따라서는 많은 시간과 노 력이 소요되더라도 정밀한 측정결과를 얻어야할 필요가 있기 때문에 이들 두가지 방법 의 정밀도를 확인하기 위해 컴퓨터에 의한 모의실험을 수행하였다.

치아 상실 및 치아의 병적 이동이 일어난 환자의 다과간 협력진료 증례 (Multidisciplinary approach for a patient with teeth loss and pathologic teeth migration: case report)

  • 강성남;김형문;이지영;손미경
    • 구강회복응용과학지
    • /
    • 제30권4호
    • /
    • pp.329-338
    • /
    • 2014
  • 치주질환이나 우식으로 인해 구치부 치아가 상실된 환자들은 잔존하고 있는 전치부 및 소구치부 치아로 안정된 교합고경을 유지하기 어렵다. 구치의 상실로 대합치의 정출이나 인접치의 경사가 발생되는 경우 교합평면이 붕괴되거나 부적절한 교합간섭을 야기하게 된다. 만약 치아 상실 상태가 지속된 경우에는 하악의 전방이동으로 인해 상악 전치의 동요와 순측 이개를 초래하게 되며 치주질환이 동반된 경우에는 더욱 심각한 상황으로 변화한다. 이와 같이 치아의 병적 이동이 일어난 환자의 치료는 보존 및 치주치료, 교정 치료를 통한 재배열, 그리고 상실된 치아의 보철수복을 통한 교합 고경의 재설정 및 유지와 같은 다과간 협력 진료가 매우 중요하다.

근접 병설터널에서 필라 압축방법에 따른 필라부 강도특성 변화에 관한 연구 (A Study on the Estimation of the Behaviors by Compression Method of Rock Pillar between Close Parallel Tunnels)

  • 김제경;이송
    • 한국지반공학회논문집
    • /
    • 제29권12호
    • /
    • pp.87-94
    • /
    • 2013
  • 근래 들어 도심지 주변의 교통난 해소를 위한 터널 건설이 증가하고 있으나 기존 노선과의 선형, 주변 구조물과의 간섭, 용지 매입의 제한 및 매입비 증가 등과 같은 제한적인 요인과 터널예정 부지 주변의 민원 및 환경훼손 최소화 등과 같은 환경적인 요인으로 인해 터널 계획시 많은 어려움을 겪고 있다. 이를 해소하고자 터널간의 거리를 좁게하는 근접병설터널의 사례가 증가하고 있으나 이러한 근접병설터널의 경우 터널간 거리를 충분히 확보하고 있는 일반적인 터널에 비해 안정성 측면에서 불리한 점이 많은데, 특히 좁은 필라부의 강도를 증가시키기 위한 다양한 방법을 적용하고 있으나 필라부의 적정한 거동특성을 반영한 필라부 보강공법은 많지 않은 실정이다. 본 논문에서는 필라부의 적정한 거동특성을 반영한 보강공법을 비교, 분석하고 이를 수치해석을 통해 검증하였다.

동양달팽이 (Nesiohelix samarangae) 의 expressed sequence tags (ESTs) 로부터 분리한 2종류의 Serpin 유전자 분석 (Identification and in silico analysis of two types of serpin genes from expressed sequence tags (ESTs) of the Oriental land snail, Nesiohelix samarangae)

  • 박소영;정지은;황희주;왕태훈;박은비;김용민;이준상;한연수;양승하;이용석
    • 한국패류학회지
    • /
    • 제30권2호
    • /
    • pp.155-163
    • /
    • 2014
  • 동양달팽이의 EST 에서 serpin 유전자는 2가지 type이 추정되었다. Ns-serpin type 1 (partial) 서열의 코딩 영역은 총 819 bp 이었으며, 272개의 아미노산으로 이루어져 있었으며, Ns-serpin type 2 (partial) 의 코딩영역은 총 555 bp, 185개의 아미노산으로 이루어져 있었다. Laminarin 처리 전에는 Ns-serpin type 1이 2개 발현되었으며 처리 후에는 Ns-serpin type 2가 1개 발현되고 있었다. BLAST 결과를 바탕으로 유사도가 높은 17개의 참고 서열과 동양달팽이의 Ns-serpin type 1, 2의 아미노산 서열을 MEGA6 프로그램의 clustalW 엔진을 이용하여 multiple sequence alignment 를 수행한 결과, 척색동물의 포유강 9종, 조류강 1종, 양서강 1종과 척색동물인 해초강, 절지동물의 거미강 1종과 곤충강 1종이 같은 군으로 묶였으며, 연체동물문의 경우 동양달팽이의 두 가지 type 을 포함한 복족강 4종이 같은 군으로 묶이는 것을 확인하였다. Psipred 프로그램을 활용하여 예측한 2D 구조도 multiple align 및 phylodendrogram 결과와 연관이 있음을 확인할 수 있었다. EST를 통해 밝힌 동양달팽이의 두 가지 type의 Ns-serpin 서열은 Aplysia californica 등의 근연종들의 서열과 유사하였다. 본 연구에서는 무척추동물에서의 선천성 면역과 연관이 있는 것으로 잘 알려진 두 종류의 serpin 유전자 서열을 동양달팽이 EST 결과에서 발굴 하였으며, 동양달팽이에서도 여러 가지 type의 serpin 이 존재 할 수 있음을 입증하였다.

Holographic phase gratings in back- and frontlights for LCD's

  • Bastiaansen, C.W.M.;Heesch, C. van;Broer, D.J.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
    • /
    • pp.421-421
    • /
    • 2006
  • The light and energy-efficiency of classical liquid crystal displays is notoriously poor due to the use of absorption-based linear polarisers and colour filters. For instance, the light efficiency of PVAL polarisers is typically between 40 and 45 % and the colour filters have a typical efficiency below 35 % which results in a total light and energy-efficiency of the display below 10 %. In the past, a variety of polarizers were developed with an enhanced efficiency in generating linearly polarized light. Typically, these polarizers are based on the polarisationselective reflection, scattering or refraction of light i.e. one polarisation direction of light is directly transmitted to the LCD/viewer and the other polarization direction of light is depolarised and recycled which results in a typical efficiency for generating linearly polarized light of 70-85 %. Also, special colour filters have been proposed based on chiral-nematic reactive mesogens which increase the efficiency of generating colour. Despite the enormous progress in this field, a need persists for improved methods for generating polarized light and colour based on low cost optical components with a high efficiency. Here, the use of holographic phase gratings is reported for the generation of polarized light and colour. The phase grating are recorded in a photopolymer which is coated onto a backor frontlight for LCDs. Typically the recording is performed in the transmisson mode or in the waveguiding mode and slanted phase gratings are generated with their refractive index modulation at an angle between 20o and 45o with the normal of the substrate. It is shown that phase gratings with a high refractive index modulation and a high efficiency can be generated by a proper selection of the photopolymer and illumination conditions. These phase gratings coupleout linearly polarized light with a high contrast (> 100) and the light is directed directly to the LCD/viewer without the need for redirection foils. Dependent on the type of phase grating, the different colours are coupled-out at a slightly different angle which potentially increases the efficiency of classical colour filters. Moreover, the phase gratings are completely transparent in direct view which opens the possibility to use them in frontlights for LCDs. Holographic polarization gratings posses a periodic pattern in the polarization state of light (and not in the intensity of light). A periodic pattern in the polarization direction of linearly polarized light is obtained upon interference of two circularly polarized laser beams. In the second part of the lecture, it is shown that these periodic polarization patterns can be recorded in a linear photo-polymerizable polymer (LPP) and that such an alignment layer induces a period rotation in the director of (reactive and non-reactive) liquid crystals. By a proper design, optical components can be produced with only first order diffraction and with a very high efficiency (>0.98). It is shown that these diffraction gratings are potentially useful in projection displays with a high brightness and energy efficiency

  • PDF