• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.144-151
• /
• 2002

Future wireless communication systems are expected to provide a broad range of multimedia services in which the asymmetry of traffic load between uplink and downlink is a significant feature. The rode division multiple access system with tune division duplex mode (CDMA/TDD) is a good solution to cope with the traffic asymmetry problem. However. the TDD system is subject to inter-cell interference compared to frequency division duplex (FDD) system. Since both uplink and downlink share the same frequency in TDD. uplink and downlink may interfere each other especially when neighboring cells require different rates of asymmetry. Thus, time slot allocation for tells is an important issue in TDD. In this paper. we propose a genetic algorithm based time slot allocation scheme which maximizes the residual system capacity. The proposed scheme allows that each cell employ different level of uplink/downlink asymmetry and satisfies the interference requirement.

• Journal of Information Processing Systems
• /
• 제8권1호
• /
• pp.1-20
• /
• 2012

The most important criterion for achieving the maximum performance in a wireless mesh network (WMN) is to limit the interference within the network. For this purpose, especially in a multi-radio network, the best option is to use non-overlapping channels among different radios within the same interference range. Previous works that have considered non-overlapping channels in IEEE 802.11a as the basis for performance optimization, have considered the link quality across all channels to be uniform. In this paper, we present a measurement-based study of link quality across all channels in an IEEE 802.11a-based indoor WMN test bed. Our results show that the generalized assumption of uniform performance across all channels does not hold good in practice for an indoor environment and signal quality depends on the geometry around the mesh routers.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.587-593
• /
• 2003

There has been much interest in the Bluetooth technology since it could enable users to connect to a wide range of computing and telecommunication devices without the need to carry or connect cables. It delivers opportunities for rapid, ad-hoc connections, and in the future, could possibly enable automatic, unconscious, connections between devices. In this paper, we discussed a scatternet formation protocol for Bluetooth-based ad hoc networks and proposed the identification system of an object using Bluetooth Scatternets. Over the past few years, several studies have been made on the identification of an object by several RF(Radio Frequency) systems. But there are still some problems, the interference of signals as an example, for the identification of an object. The critical question is how to identify an object precisely without the interference of signals. This paper is an investigation of the Scatternet formation protocol for Bluetooth-based ad hoc networks and the identification system of an object using Bluetooth Scatternets composed of multiple Piconets.

• Journal of electromagnetic engineering and science
• /
• 제6권1호
• /
• pp.10-17
• /
• 2006

For the sake of the potential ability of overcoming interference in TD-SCDMA(time division-synchronous code division multiple access) systems, pilot signal is adopted, but the presented TD-SCDMA protocol has not considered the Rake technique for their mobile terminals. This paper developed a RAKE receiver algorithm and an implementation circuit, which make use of the pilot signal in the burst structure of the TD-SCDMA base station to estimate main channel parameter(channel delays) in the downlink of TD-SCDMA wireless network. The algorithm can reduce multipath interference for the mobile units in multiusers' case. Theoretic performance analysis presented in the paper and computer simulations show that there is a range of BER for Rake receiver and confirm that the proposed RAKE receiver algorithm achieved a better performance under multipath fading propagation and multiusers conditions.

• 한국전기전자재료학회논문지
• /
• 제11권1호
• /
• pp.1-6
• /
• 1998

Polyaniline free standing films are prepared by various processing. The properties of these films such as electrical conductivity and electromagnetic shielding efficiency are investigated. The conductivities of films doped with a camphorsulfonic acid and a silver are found to be 170/cm and 190S/cm, respectively, indicating metallic behavior. The films added silver, which are casted from hydrochloric acid and dodecylbenzensulfonic acid, show that the electromagnetic shielding efficiency are obtained 42∼52dB and 46∼56dB in the frequency range of 10MHz∼1GHz, respectively. This suggests that the films added silver, which is casted from dodecylbenzensulfonic acid, can be used as electromagnetic shielding material.

• Journal of the Optical Society of Korea
• /
• 제17권1호
• /
• pp.81-85
• /
• 2013

A miniaturized fluorescence detection system based on total internal reflection (TIR) configuration, which is applicable to detecting the presence of biological materials labeled with fluorescence dye in micro total analysis systems (${\mu}TAS$), is proposed. In conventional fluorescence testing and analysis devices, interference between the excitation light beam and the emitted light from dyes is unavoidable. This paper presents a fluorescence detection system based on TIR configuration that allows the excitation light beam and the emitted light to be spatially perpendicular to each other so as to minimize the interference where fluorescence emission is detected at the orthogonal angle to the excitation beam. We achieved the limit of detection of about 5 nmol/L with a high linearity of 0.994 over a wide range of 6-FAM mol concentration, being comparable to that in earlier studies.

• 한국정밀공학회지
• /
• 제14권10호
• /
• pp.151-156
• /
• 1997

A laser measurement system, a modified Michelson interferometer, which can accurately measure high speed length and displacement of servomechanisms by detecting a phase shift in the measurement beam using an optical interference was developed. A frequency stabilized laser source and a 20 fold frequency interpolation and digitizing circuit were applied to the system. The refra- ctive index of the ambient air was calibrated through the Edlens formula. The system achieved a resolution of /40, 16nm, a maximum allow-able measurement speed of 600nm/sec, and a length measure- ment range of 1500 mm. Performance of the system was evaluated on the machining center in short and long length measurements.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.209-212
• /
• 2005

Recently, since structures have become extremely airtight with the development of high-rise apartments, mixed use residential and commercial buildings and offices, large capacity range hoods have become commonly implemented. However, the high noise level caused by this range hood system made of thin plate is the cause of increased complaints among users. In this study, the level of noise emitted from this type of range hood was measured by height at the user's location in the kitchen. It was confirmed that a great deal of noise was emitted in the downward direction of the hood. In order to minimize the noise emitted from this type of range hood, a new type of fan was manufactured. This was done by changing only the material and shape of the fan, since it was determined to be the primary source of noise emission. Then a comparison and evaluation were carried out regarding the noise characteristics between the new type of fan and the existing type of fan. As a result, it was confirmed that the noise from the new fan was reduced by more than 2 dB compared to the existing fan without noise interference at the discharge end.

• 한국통신학회논문지
• /
• 제38A권3호
• /
• pp.277-288
• /
• 2013

차세대 이동통신 시스템 규격으로서 3GPP LTE-Advanced (Third Generation Partnership Project Long Term Evolution-Advanced)는 급격하게 증가하는 무선 데이터 트래픽 요구를 해결하기 위해 펨토 셀 혹은 피코 셀과 같은 소형 기지국 및 단말과 단말 사이에 근거리 통신을 수행하는 D2D (Device-to-Device) 통신 방식을 도입하였다. 대형 기지국인 매크로 셀과 소형 기지국인 펨토 셀과 피코 셀 그리고 D2D 통신이 한 개의 셀 내에 혼재하면서 생기는 다양한 간섭 상황이 정리되었으며, 이를 해결하기 위해서 다양한 주제 범위에서 연구가 되었다. 따라서 본 논문에서는 이러한 HetNet (Heterogeneous Network)에서 매크로 셀과 타 기종 네트워크 사이의 간섭을 관리하고 주파수 효율성을 높일 수 있는 간섭회피 방법을 제시한다. 본 논문에서 고려하는 CCN (Cluster Coordinator Node)의 도움을 받는 셀간 간섭회피 방법은 하나의 MeNB (Macro enhanced Node-B)와 다수 소형 셀들이 공존하는 HetNet 환경에서 다수 소형 셀들을 하나의 CCN이 관리하는 구조를 고려한다. HetNet에서 셀간 간섭관리를 위한 구체적인 방법으로 본 논문에서는 CCN 영역 내에 사용자들의 간섭회피를 위한 자원할당 방법을 제안하고, 이들 성능을 시스템 레벨 모의시험을 통해 검증하였다.

• 대한임상검사과학회지
• /
• 제36권2호
• /
• pp.127-130
• /
• 2004

Analytical sensitivity on TDM test is the lowest concentration that can be distinguished from background noise. The aim of study was to evaluate analytical sensitivity that is also referred to as the lower limit of detection(LLD) about difference between zero calibrator and isotonic saline sample. We tested for 10 days with zero calibrators and 0.85% saline samples while running trilevel control samples under control. Raw data divided by two groups calculated mean and standard deviation from two sample populations and analytical sensitivity by ${\bar{X}}+2SD$. In comparison with isotonic saline samples and zero calibrators, there were significant differences in phenytoin, phenobarbital and vancomycin, etc. Especially analytical sensitivity on phenytoin is at the same level as the upper limit of analytical measurement range with $40{\mu}g/mL$. We think the cause of this is matrix interference. In conclusion, we were sure that standard protocol for analytical sensitivity as lower limit of analytical measurement range on TDM test must be measured with zero standard rather than an isotonic saline sample and type 1 reagent DW for reducing matrix effects within interactions between different materials in a mixture.